Download RedHat.passcertification.EX300.2018-06-30.1e.50q.vcex

Download Dump

File Info

Exam Red Hat Certified Engineer (RHCE)
Number EX300
File Name RedHat.passcertification.EX300.2018-06-30.1e.50q.vcex
Size 4.23 Mb
Posted June 30, 2018
Downloaded 40



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
RHCE Test Configuration Instructions  
Information for the two systems you will use in test is the following: 
system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client. 
Password for both of the two systems is atenorth  

System’s IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: 
system1.group3.example.com: 172.24.3.5
system2.group3.example.com: 172.24.3.10 
The subnet mask is 255.255.255.0  

Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3.  
host.group3.example.com provides a centralized authentication service domain  
GROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account: 

  

Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.  
  
Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.  
  
Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: 
http://server1.group3.example.com/rhel 
  
Part of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.  
  
You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet 172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.  
  
PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don’t need them. 
Create a script to add users 
Create a script named /root/mkusers on the system1, this script can achieve to add local users for the system1, and user names of these users are all from a file which contains the usernames list, and meet the following requirements at the same time: 
This script is required to provide a parameter; this parameter is the file which contains the usernames list
This script need provide the following message: Usage:/root/mkusers if it does not provide a parameter, then exit and return the corresponding value
This script need provide the following message: Input file not found if it provides a name that does not exist, then exit and return the corresponding value
Create a user shell log into /bin/false
This script does not need to set password for users
6. You can get the usernames list from the following URL as a test: http://rhgls. domain11.example.com/materials/ userlist

  • A: Please see explanation



Question 2
RHCE Test Configuration Instructions  
Information for the two systems you will use in test is the following: 
system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client. 
Password for both of the two systems is atenorth  

System’s IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: 
system1.group3.example.com: 172.24.3.5
system2.group3.example.com: 172.24.3.10 
The subnet mask is 255.255.255.0  

Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3.  
host.group3.example.com provides a centralized authentication service domain  
GROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account: 

  

Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.  
  
Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.  
  
Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: 
http://server1.group3.example.com/rhel 
  
Part of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.  
  
You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet 172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.  
  
PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don’t need them. 
Configure the iSCSI Server  
Configure the system1 to provide a ISCSI service disk named iqn.2014- 
09.com.example.domain11:system1 and meet the following requirements at the same time: 
The Server Port is 3260  
Use iSCSI-store as its back-end volume, its size is 3G  
This service just can be accessed by system2.domian11.example.com

  • A: Please see explanation



Question 3
RHCE Test Configuration Instructions  
Information for the two systems you will use in test is the following: 
system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client. 
Password for both of the two systems is atenorth  

System’s IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: 
system1.group3.example.com: 172.24.3.5
system2.group3.example.com: 172.24.3.10 
The subnet mask is 255.255.255.0  

Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3.  
host.group3.example.com provides a centralized authentication service domain  
GROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account: 

  
Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.  
  
Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.  
  
Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: 
http://server1.group3.example.com/rhel 
  
Part of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.  
  
You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet 172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.  
  
PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don’t need them. 
Configure iSCSI Clients 
Configure the system2 to make it can link to iqn.2014-09.com.example.domain11:system1 provided by the system, meet the following requirements at the same time: 
1. iSCSI device automatically loads during the system start-up. 
Block device iSCSI contains a 2100MIB partition, and is formatted as ext4. 
This partition mount to the /mnt/data and mount automatically during the system start-up.

  • A: Please see explanation



Question 4
RHCE Test Configuration Instructions  
Information for the two systems you will use in test is the following: 
system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client. 
Password for both of the two systems is atenorth  

System’s IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: 
system1.group3.example.com: 172.24.3.5
system2.group3.example.com: 172.24.3.10 
The subnet mask is 255.255.255.0  

Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3.  
host.group3.example.com provides a centralized authentication service domain  
GROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account: 

  

Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.  
  
Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.  
  
Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: 
http://server1.group3.example.com/rhel 
  
Part of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.  
  
You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet 172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.  
  
PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don’t need them. 
Configure a Database  
Create a Maria DB database named Contacts on system1 and meet the following requirements at the same time: 
The database should contain the contents of the database replication, URL for copying files is: http://rhgls.domain11.example.com/materials/users.mdb
Database just can be accessed by localhost  
In addition to the root user, this database only can be searched by user Luigi, user’s password is redhat  
The password for root user is redhat, does not allow empty password

  • A: Please see explanation



Question 5
RHCE Test Configuration Instructions  
Information for the two systems you will use in test is the following: 
system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client. 
Password for both of the two systems is atenorth  

System’s IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements: 
system1.group3.example.com: 172.24.3.5
system2.group3.example.com: 172.24.3.10 
The subnet mask is 255.255.255.0  

Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3.  
host.group3.example.com provides a centralized authentication service domain  
GROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account: 

  

Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.  
  
Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.  
  
Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link: 
http://server1.group3.example.com/rhel 
  
Part of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.  
  
You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet 172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.  
  
PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don’t need them. 
Database Query  
Use database Contacts on the system1, and use the corresponding SQL to search and answer the following questions: 
What’s the person name whose password is solicitous? 
How many people’s names are John and live is Shanghai at the same time?

  • A: Please see explanation



Question 6
In accordance with the following requirements to deploy ssh login service: 
harry belongs to example.com which can remote login your systems.  
However, users of remote.test cannot use ssh login to your machine.

  • A: Please see explanation



Question 7
Via nfs service share the /common directory in your system, just doing ONE share in example.com domain.

  • A: Please see explanation



Question 8
According to the following requirements, deploy your ftp login rule: 
Users in example.com domain must be able to login to your ftp server as an anonymous user.  
But users outside the example.com domain are unable to login to your server

  • A: Please see explanation



Question 9
Deploying your exam system: link to the iscsi target in the instructor.example.com and distinguish it well, then format as ext3 file system. You must be able to mount the file system of the iscsi target to the /mnt/iscsi directory in your own system and make this file system can automatically mount (permanently mount) after system restart.

  • A: Please see explanation



Question 10
In accordance with the following requirements, share /common directory through smb service.  
your sub service must be in the SAMBA working-set  
the shared name of common is common  
the common share just can be shared by the customers in the example.com domain  
the common must be available for browsing  
mary must be able to login to the SMB share and for read operation, “password” is the secret code if it need to be verified.

  • A: Please see explanation









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset