NS0-182: NetApp Certified Storage Installation Engineer, ONTAP

Which NetApp tool relies on PowerShell to produce a comprehensive handover report to the customer?

Active IQ
Config Advisor
NetAppDocs
Fusion

Correct answer: C

Which LIF type is used by default for hardware-assisted storage failover communication?

intercluster
node-mgmt
data
cluster-mgmt

Correct answer: B

Explanation:

Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950%2Fstorage__failover__hwassist__show.html

You install a new FAS2650 HA with a DS224C disk shelf and ONTAP 9.5 on a customer site.

Referring to the exhibit, which steps are required to get an HA cabled system?

1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 4.
2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 4.
3. Cable the out-of-band ACP.
1. Insert a cable from right controller port 0a to IOMA port 1, and from port 0b to IOMB port 3.
2. Insert a cable from left controller port 0a to IOMB port 1, and from port 0b to IOMA port 3.
1. Insert a cable from right controller port 0a to IOMB port 1, and from port 0b to IOMA port 4.
2. Insert a cable from left controller port 0a to IOMA port 1, and from port 0b to IOMB port 4.
3. Cable the out-of-band ACP.
1. Insert a cable from right controller port 0a to IOMB port 2, and from port 0b to IOMA port 3.
2. Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.

Correct answer: C

You just installed two nodes into an existing ONTAP cluster. When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.

Referring to the exhibit, which statement is true?

The node-management LIF has to be on e0M for NTP to work.
The DNS is not configured for this node.
The NTP is adjusting in small increments.
No NTP server is configured for this node.

Correct answer: B

You completed the installation of an AFF A700s with NetApp CN1610 switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not visible in OnCommand System Manager.

In this scenario, what caused this problem?

Breakout cables were used and the second port on the same ASIC became disabled.
This is a hardware error and you must open a case with NetApp Support.
You must first enable the ports using the network port modify command.
You are missing a license to enable those ports.

Correct answer: C

Explanation:

Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP11694144

A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve file traffic have moved to alternative ports. However, LIFs that serve the block have not migrated.

In this scenario, what is happening?

The failover group is configured incorrectly.
The fiber switch is configured incorrectly.
There is a faulty SFP.
The LIFs that serve the block protocol do not failover.

Correct answer: B

A customer has a 6-node AFF A700 cluster and wants to add four nodes without having to update license functionality for each node manually.

In this scenario, which type of license provides this functionality?

Demo License
Site License
Standard License
Evaluation License

Correct answer: C

After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.

Referring to the exhibit, what caused the problem?

Port a0a of node cluster1-01 is down.
The LIF has to be configured with a failover group.
The ports of cluster1-02 are missing in the broadcast domain.
The broadcast-domain MTU needs to be either 1500 or 9000.

Correct answer: D

Explanation:

Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-ug-rdg%2FGUID-3EC50093-6858-46B4-8B70-0B5AE4BDAB69.html

Which two NetApp features encrypt storage data? (Choose two.)

NVE
NSE
TPM
NVMe

Correct answer: AB

Explanation:

Reference: https://www.netapp.com/us/media/ds-3899.pdf

While preparing for a new ONTAP installation, you discover an issue with the controllers that are running ONTAP 9.5. The issue is not affecting controllers that are running ONTAP 9.4 with the latest patch version.

In this scenario, which two steps should you perform to solve the problem? (Choose two.)

Review the issue with the customer's deployment to see if it would be affected.
Inform your customer that they must always install the latest supported ONTAP release.
If the controllers are in a Product Support Bulletin with ONTAP 9.5, open a case and wait for support to provide a patch release.
Download ONTAP 9.4 with the latest patch version and ONTAP 9.5 for an eventual rollback on the day of the installation.

Correct answer: CD

Vendor:	Network Appliance
Exam Code:	NS0-182
Exam Name:	NetApp Certified Storage Installation Engineer, ONTAP
Date:	Dec 30, 2019
File Size:	912 KB

Download NetApp Certified Storage Installation Engineer, ONTAP.NS0-182.PassCertification.2019-12-30.51q.vcex

How to open VCEX files?

Demo Questions

Question 1

Question 2

Question 3

Question 4

Question 5

Question 6

Question 7

Question 8

Question 9

Question 10

ProfExam at a 20% markdown