Download NetApp Certified Implementation Engineer -SAN, Clustered Data ONTAP.PracticeTest.NS0-507.2018-11-19.1e.50q.vcex
Download DumpFile Info
| Exam | NetApp Certified Implementation Engineer - SAN, Clustered Data ONTAP |
| Number | NS0-507 |
| File Name | NetApp Certified Implementation Engineer -SAN, Clustered Data ONTAP.PracticeTest.NS0-507.2018-11-19.1e.50q.vcex |
| Size | 1.54 Mb |
| Posted | November 19, 2018 |
| Downloaded | 3 |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: EXAMFILESCOM
With discount: 20%
Demo Questions
Question 1
You are planning a migration from a 7-mode system running Data ONTAP 7.3 to a new AFF A700 ONTAP 9.1 system. This 7-mode system provides only FC LUNs for a Windows Server 2012R2 server farm. The 7-Mode system cannot upgrade its volumes to 64-bit.
In this scenario, what would you use for the migration?
In this scenario, what would you use for the migration?
- A: 7-Mode Transition Tool (7MTT)
- B: Foreign LUN Import (FLI)
- C: OnCommand System Manager
- D: Unified Host Utility Kit
Question 2
Where would you find the environment values of controllers and disk shelves (e.g. BTU and watts)?
- A: Interoperability matrix tool (IMT)
- B: Installation and setup instructions poster
- C: Config advisor
- D: Hardware universe
Question 3
Referring to the diagram shown in the exhibit, what will happen when the SAS adapter in slot 2 on Node A fails?
- A: Node A will continue to access all drives through the onboard SAS port 0a.
- B: Node A will lose all access to all drives.
- C: Node A will continue to access all drives through the Infiniband connection with Node B.
- D: Node A will shut down until SAS adapter in slot 2 is replaced.
Question 4
You have a switch called “NK5-A”. The switch is configured with an NP_Port.
Which switch feature on NK5-A uses NP_Ports to allow for fabric expansion of new FC switches without having to designate additional domain IDs?
Which switch feature on NK5-A uses NP_Ports to allow for fabric expansion of new FC switches without having to designate additional domain IDs?
- A: NPIV
- B: NPV
- C: FCIP
- D: F_port channel trunking
Question 5
When a new LUN is allocated, which volume and LUN configuration will use the smallest amount of storage?
- A: Volume guarantee none, fractional reserve 0, space reservation disabled
- B: Volume guarantee none, fractional reserve 0, space reservation enabled
- C: Volume guarantee volume, fractional reserve 100, space reservation enabled
- D: Volume guarantee volume, fractional reserve 100, space reservation enabled
Question 6
You need to perform a DR test on a FAS8200 with SAN LUNs using the onboard UTA2 with 16Gb SFP+.
In this scenario, what is the minimum port speed required on the DR Site’s FC switches?
In this scenario, what is the minimum port speed required on the DR Site’s FC switches?
- A: 2 Gb
- B: 16 Gb
- C: 8 Gb
- D: 4 Gb
Question 7
For host connections to ONTAP storage, which three components are used as queries in the Netapp Interoperability Matrix Tool (IMT)? (Choose three.)
- A: Firmware
- B: Adapter model
- C: Driver
- D: SFP+
- E: Optical cable
Question 8
Referring to the exhibit, you see an FC SAN configuration that uses multiple fabrics and the best practice Implementation.
How many paths per LUN do you expect the host to see if the cable 0c connecting controller 2 to fabric 1 is pulled out for connectivity redundancy testing?
How many paths per LUN do you expect the host to see if the cable 0c connecting controller 2 to fabric 1 is pulled out for connectivity redundancy testing?
- A: 6
- B: 14
- C: 12
- D: 7
Question 9
You successfully migrated LUNs that are accessed over FC from a 7-Mode system to ONTAP 9.1. Your windows Server 2012 is unable to see the new LUNs.
What are three reasons for this problem? (Choose three.)
What are three reasons for this problem? (Choose three.)
- A: The IQN is not included in the igroup.
- B: You have no port sets.
- C: NPIV is not enabled on the switch.
- D: The host is directly attached to the cluster nodes.
- E: Switch zoning is misconfigured.
Question 10
You are migrating data from a foreign array into an existing 2-node AFF300 ONTAP cluster using Foreign LUN import. All existing FC ports are currently in use for FC host connectivity on the Netapp cluster.
Which two statements are correct in this scenario? (Choose two.)
Which two statements are correct in this scenario? (Choose two.)
- A: Add FC HBA cards to the ONTAP cluster to allow for additional initiators.
- B: You can change the personality of one of the existing FC ports on the AFF A300 from initiator to target.
- C: You can change the personality of one of the existing FC ports on the AFF A300 from target to initiator.
- D: Add FC HBA cards to the ONTAP cluster to allow for additional targets.
HOW TO OPEN VCEX AND EXAM FILES
Use ProfExam Simulator to open VCEX and EXAM files
HOW TO OPEN VCE FILES
Use VCE Exam Simulator to open VCE files
