Download NetApp Accredited Hardware Support Engineer.NS0-093.ExamTopics.2026-01-20.26q.vcex

Vendor: NetApp
Exam Code: NS0-093
Exam Name: NetApp Accredited Hardware Support Engineer
Date: Jan 20, 2026
File Size: 16 KB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
ProfExam Discount

Demo Questions

Question 1
You have created a case with NetApp Support for an issue with a DS4246 shelf on an ONTAP 9.12.1 system. They have requested that you provide shelf logs.
What action do you need to take to collect the shelf logs?
  1. Provide the output of the nodeshell command rdfile/etc/log/shelflog.
  2. Invoke an autosupport of type all using Active IQ Unified Manager.
  3. Invoke a diagnostic AutoSupport with the subsystem storage.
  4. Invoke a diagnostic autosupport with the subsystem log_files.
Correct answer: C
Question 2
Which two of the following are field replaceable units (FRUs) on an AFF A220 system? (Choose two.)
  1. NVMEM battery
  2. mSATA boot device
  3. NVME Flash Cache feature
  4. chassis fan
Correct answer: AD
Question 3
You have replaced a failed boot device. You perform boot_recovery and receive no errors. However, when the node reboots, it reports that it has no disks.
What are two possible causes? (Choose two.)
  1. The SAS cables were incorrectly reconnected after reinstalling the motherboard.
  2. The disks that are owned by this node have been marked as failed.
  3. The node is booting a lower version of ONTAP software than was last used.
  4. The interconnect is down.
Correct answer: AB
Question 4
During which two operations is the NVRAM replayed by the high-availability (HA) partner? (Choose two.)
  1. after triggering a sync core
  2. when a node is halted
  3. during a negotiated takeover
  4. when the node loses power
Correct answer: CD
Question 5
You are replacing a boot device on a FAS8300 system that is running ONTAP 9.10P6 software. You attach a USB memory stick to the external USB port on the storage controller but cannot access the memory stick.
What step needs to be performed to access the boot device?
  1. Set the port to “enabled” with setenv.
  2. You need to use ONTAP 9.11 or later software.
  3. Add the boot device before the BIOS is loaded.
  4. The external USB port is not activated on NetApp systems.
Correct answer: A
Question 6
In the latest MANAGEMENT LOG AutoSupport message, you try to inspect the ENVIRONMENT section but find it empty.
In which section of AutoSupport can you find the reason?
  1. AUTOSUPPORT-BUDGET.XML
  2. HEADERS
  3. AUTOSUPPORT-HISTORY.XML
  4. MANIFEST.XML
Correct answer: A
Question 7
Which two commands confirm whether an aggregate is WAFL inconsistent? (Choose two.)
  1. wafiron show <aggregate>
  2. node run –node <node> sysconfig –r
  3. storage aggregate show
  4. node run –node <node> sysconfig –a
Correct answer: AC
Question 8
You have upgraded your cluster from ONTAP 9.5 software to ONTAP 9.7 software. After the upgrade, you notice that the upgrade causes issues. You decide to revert to ONTAP 9.5 software.
Which revert step is allowed?
  1. Revert to ONTAP 9.5 software with the netboot procedure.
  2. Revert from ONTAP 9.7 software to ONTAP 9.5 software by using the boot backup procedure.
  3. Revert directly from ONTAP 9.7 software to ONTAP 9.5 software.
  4. Revert from ONTAP 9.7 software to ONTAP 8.6 software and then to ONTAP 9.5 software.
Correct answer: D
Question 9
In which two sections of AutoSupport can you find information to analyze the following panic? (Choose two.)
Panic_Message: PCI Error NMI from device(s):ErrSrcID(CorrSrc(0xf00),UCorrSrc(0x18)), RPT(0,3,0):Qlogic FC 16G adapter in slot 1 on Controller
  1. HA-RASTRACE.TGZ
  2. ALL-COREDUMP.XML
  3. SSRAM-LOG
  4. PCI-HIERARCHY.XML
Correct answer: AC
Question 10
A node has unexpectedly failed and is unresponsive through its node management interface.
Which two commands from the Service Processor are helpful to determine the root cause? (Choose two.)
  1. sp status –d
  2. event log show
  3. system log
  4. system core
Correct answer: BD
Question 11
Which LOADER prompt command ensures that POST is done on boot?
  1. setenv POST=true
  2. bye
  3. boot_diag
  4. boot_ontap
Correct answer: A
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!