Download Installation, Storage, and Compute with Windows Server 2016.70-740.Test4Prep.2019-07-01.157q.vcex

Vendor: Microsoft
Exam Code: 70-740
Exam Name: Installation, Storage, and Compute with Windows Server 2016
Date: Jul 01, 2019
File Size: 3 MB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
You have two servers that run Windows Server 2016. 
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. 
You need to configure the network cards on the servers for the planned NLB configuration. 
Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use multicast.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: A
Explanation:
Following are the hardware requirements to run an NLB cluster. All hosts in the cluster must reside on the same subnet. There is no restriction on the number of network adapters on each host, and different hosts can have a different number of adapters. Within each cluster, all network adapters must be either multicast or unicast. NLB does not support a mixed environment of multicast and unicast within a single cluster. If you use the unicast mode, the network adapter that is used to handle client-to-cluster traffic must support changing its media access control (MAC) address. Following are the software requirements to run an NLB cluster. Only TCP/IP can be used on the adapter for which NLB is enabled on each host. Do not add any other protocols (for example, IPX) to this adapter. The IP addresses of the servers in the cluster must be static. References:https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
Following are the hardware requirements to run an NLB cluster. 
  • All hosts in the cluster must reside on the same subnet. 
  • There is no restriction on the number of network adapters on each host, and different hosts can have a different number of adapters. 
  • Within each cluster, all network adapters must be either multicast or unicast. NLB does not support a mixed environment of multicast and unicast within a single cluster. 
  • If you use the unicast mode, the network adapter that is used to handle client-to-cluster traffic must support changing its media access control (MAC) address. 
Following are the software requirements to run an NLB cluster. 
  • Only TCP/IP can be used on the adapter for which NLB is enabled on each host. Do not add any other protocols (for example, IPX) to this adapter. 
  • The IP addresses of the servers in the cluster must be static. 
References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
Question 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
You have two servers that run Windows Server 2016. 
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. 
You need to configure the network cards on the servers for the planned NLB configuration. 
Solution: You configure the network cards to be on the same subnet and to have dynamic IP addresses. You configure the cluster to use multicast.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: B
Explanation:
Following are the hardware requirements to run an NLB cluster. All hosts in the cluster must reside on the same subnet. There is no restriction on the number of network adapters on each host, and different hosts can have a different number of adapters. Within each cluster, all network adapters must be either multicast or unicast. NLB does not support a mixed environment of multicast and unicast within a single cluster. If you use the unicast mode, the network adapter that is used to handle client-to-cluster traffic must support changing its media access control (MAC) address. Following are the software requirements to run an NLB cluster. Only TCP/IP can be used on the adapter for which NLB is enabled on each host. Do not add any other protocols (for example, IPX) to this adapter. The IP addresses of the servers in the cluster must be static. References:https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
Following are the hardware requirements to run an NLB cluster. 
  • All hosts in the cluster must reside on the same subnet. 
  • There is no restriction on the number of network adapters on each host, and different hosts can have a different number of adapters. 
  • Within each cluster, all network adapters must be either multicast or unicast. NLB does not support a mixed environment of multicast and unicast within a single cluster. 
  • If you use the unicast mode, the network adapter that is used to handle client-to-cluster traffic must support changing its media access control (MAC) address. 
Following are the software requirements to run an NLB cluster. 
  • Only TCP/IP can be used on the adapter for which NLB is enabled on each host. Do not add any other protocols (for example, IPX) to this adapter. 
  • The IP addresses of the servers in the cluster must be static. 
References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
Question 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
You have two servers that run Windows Server 2016. 
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers. 
You need to configure the network cards on the servers for the planned NLB configuration. 
Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use unicast.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: A
Explanation:
Following are the hardware requirements to run an NLB cluster. All hosts in the cluster must reside on the same subnet. There is no restriction on the number of network adapters on each host, and different hosts can have a different number of adapters. Within each cluster, all network adapters must be either multicast or unicast. NLB does not support a mixed environment of multicast and unicast within a single cluster. If you use the unicast mode, the network adapter that is used to handle client-to-cluster traffic must support changing its media access control (MAC) address. Following are the software requirements to run an NLB cluster. Only TCP/IP can be used on the adapter for which NLB is enabled on each host. Do not add any other protocols (for example, IPX) to this adapter. The IP addresses of the servers in the cluster must be static. References:https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
Following are the hardware requirements to run an NLB cluster. 
  • All hosts in the cluster must reside on the same subnet. 
  • There is no restriction on the number of network adapters on each host, and different hosts can have a different number of adapters. 
  • Within each cluster, all network adapters must be either multicast or unicast. NLB does not support a mixed environment of multicast and unicast within a single cluster. 
  • If you use the unicast mode, the network adapter that is used to handle client-to-cluster traffic must support changing its media access control (MAC) address. 
Following are the software requirements to run an NLB cluster. 
  • Only TCP/IP can be used on the adapter for which NLB is enabled on each host. Do not add any other protocols (for example, IPX) to this adapter. 
  • The IP addresses of the servers in the cluster must be static. 
References:
https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
Question 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
You are a server administrator at a company named Contoso, Ltd. 
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table. 
  
All of the virtual switches are of the external type. 
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network. 
Solution: You implement live migration by using Host3 and Host4.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: A
Question 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
You are a server administrator at a company named Contoso, Ltd. 
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table. 
  
All of the virtual switches are of the external type. 
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network. 
Solution: You implement live migration by using Host1 and Host2.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: B
Question 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
You are a server administrator at a company named Contoso, Ltd. 
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table. 
  
All of the virtual switches are of the external type. 
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network. 
Solution: You implement a Hyper-V Replica between Host2 and Host4.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: B
Question 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
Your network contains an Active Directory forest. 
You install Windows Server 2016 on 10 virtual machines. 
You need to deploy the Web Server (IIS) server role identically to the virtual machines. 
Solution: You use Windows PowerShell Desired State Configuration (DSC) to create a default configuration, and then you apply the configuration to the virtual machines.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: A
Explanation:
DSC gives us a declarative model for system configuration management. What that really means is that we can specify how we want a workstation or server (a ‘node’) to be configured and we leave it to PowerShell and the Windows Workflow engine to make it happen on those target ‘nodes’. We don’t have to specify how we want it to happen. The main advantages of DSC are:To simplify your sysadmin tasks by configuring one or more devices automatically To be able to configure machines identically with the aim to standardize them To ensure, at a given time, that the configuration of a machine always be identical to its initial configuration, so as to avoid drift Deployment on demand as a Cloud strategy, or ‘en masse’, is largely automated and simplified References:https://www.simple-talk.com/sysadmin/powershell/powershell-desired-state-configuration-the-basics/
DSC gives us a declarative model for system configuration management. What that really means is that we can specify how we want a workstation or server (a ‘node’) to be configured and we leave it to PowerShell and the Windows Workflow engine to make it happen on those target ‘nodes’. We don’t have to specify how we want it to happen. 
The main advantages of DSC are:
  • To simplify your sysadmin tasks by configuring one or more devices automatically 
  • To be able to configure machines identically with the aim to standardize them 
  • To ensure, at a given time, that the configuration of a machine always be identical to its initial configuration, so as to avoid drift 
  • Deployment on demand as a Cloud strategy, or ‘en masse’, is largely automated and simplified 
References:
https://www.simple-talk.com/sysadmin/powershell/powershell-desired-state-configuration-the-basics/
Question 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
Your network contains an Active Directory forest. 
You install Windows Server 2016 on 10 virtual machines. 
You need to deploy the Web Server (IIS) server role identically to the virtual machines. 
Solution: From a Group Policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: B
Question 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
Your network contains an Active Directory forest. 
You install Windows Server 2016 on 10 virtual machines. 
You need to deploy the Web Server (IIS) server role identically to the virtual machines. 
Solution: You create a software installation package, and then you publish the package to the virtual machines by using a Group Policy object (GPO).
Does this meet the goal?
  1. Yes
  2. No
Correct answer: B
Question 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. 
You have a server named Server1 that runs Windows Server 2016. 
Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory. 
You need to log an event in the Application event log whenever App1 consumes more than 4 GB of memory. 
Solution: You create a performance counter data collector.
Does this meet the goal?
  1. Yes
  2. No
Correct answer: B
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!