Download Installing and Configuring Windows Server 2012.braindumps.70-410.2020-01-23.1e.313q.vcex


Download Exam

File Info

Exam Installing and Configuring Windows Server 2012
Number 70-410
File Name Installing and Configuring Windows Server 2012.braindumps.70-410.2020-01-23.1e.313q.vcex
Size 10.12 Mb
Posted January 23, 2020



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. 
An iSCSI SAN is available on the network. 
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. 
You create a LUN on the SAN to host the virtual hard drive files for the virtual machines. 
You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent VM1 from being paused if the LUN runs out of disk space. 
Which type of virtual hard disk should you create on the LUN?

  • A: Dynamically expanding VHDX
  • B: Fixed-size VHDX
  • C: Fixed-size VHD
  • D: Dynamically expanding VHD



Question 2
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 has the virtual switches listed in the following table. 

  

You create a virtual machine named VM1. VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on VM1. 
You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network. 
What should you do on Server1?

  • A: Run the Set-VmNetworkAdapter cmdlet.
  • B: Add a new network adapter to VM1.
  • C: Create a new virtual switch on Server 1.
  • D: Modify the properties of vSwitch1 and vSwitch2.



Question 3
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 is connected to two Fibre Channel SANs and is configured as shown in the following table. 

  

You have a virtual machine named VM1. 
You need to configure VM1 to connect to SAN1. 
What should you do first?

  • A: Add one HBA
  • B: Create a Virtual Fibre Channel SAN.
  • C: Create a Hyper-V virtual switch.
  • D: Configure network adapter teaming.



Question 4
Your network contains an Active Directory forest. The forest functional level is Windows Server 2012 R2. The forest contains a single domain. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2. 
You purchase a network scanner named Scanner1 that supports Web Services on Devices (WSD). 
You need to share the network scanner on Server1. 
Which server role should you install on Server1?

  • A: Web Server (IIS)
  • B: Fax Server
  • C: Print and Document Services
  • D: File and Storage Services



Question 5
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are part of a workgroup. 
On Server1 and Server2, you create a local user account named Admin1.You add the account to the local Administrators group. On both servers, Admin1 has the same password. 
You log on to Server1 as Admin1. You open Computer Management and you.connect to Server2. 
When you attempt to create a scheduled task, view the event logs, and manage the shared folders, you receive Access Denied messages. 
You need to ensure that you can administer Server2 remotely from Server1 by using Computer Management. 
What should you configure on Server2?

  • A: From Server Manager, modify the Remote Management setting.
  • B: From Local Users and Groups, modify the membership of the Remote Management Users group.
  • C: From Windows Firewall, modify the Windows Management Instrumentation (WMI) firewall rule.
  • D: From Registry Editor, configure the LocalAccountTokenFilterPolicy registry value.



Question 6
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. 
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. 
Server1 is configured as shown in the following table. 

  

You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS). 
You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE. 
Which virtual machine setting should you configure for VM2?

  • A: NUMA topology
  • B: Resource control
  • C: resource metering
  • D: Virtual Machine Chimney
  • E: The VLAN ID
  • F: Processor Compatibility
  • G: The startup order
  • H: Automatic Start Action
  • I: Integration Services
  • J: Port mirroring
  • K: Single-root I/O virtualization



Question 7
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. 
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. 
Server1 is configured as shown in the following table. 

  

VM2 sends and receives large amounts of data over the network. 
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition. 
What should you configure?

  • A: NUMA topology
  • B: Resource control
  • C: resource metering
  • D: Virtual Machine Chimney
  • E: The VLAN ID
  • F: Processor Compatibility
  • G: The startup order
  • H: Automatic Start Action
  • I: Integration Services
  • J: Port mirroring
  • K: Single-root I/O virtualization



Question 8
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. 
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. 
Server1 is configured as shown in the following table. 

  

You need to ensure that VM1 can use more CPU time than the other virtual machines when the CPUs on Server1 are under a heavy load. 
What should you configure?

  • A: NUMA topology
  • B: Resource control
  • C: resource metering
  • D: virtual Machine Chimney
  • E: The VLAN ID
  • F: Processor Compatibility
  • G: The startup order
  • H: Automatic Start Action
  • I: Integration Services
  • J: Port mirroring
  • K: Single-root I/O virtualization



Question 9
Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GP1 that is linked to the domain. GP1 contains a software restriction policy that blocks an application named App1. 
You have a workgroup computer named Computer1 that runs Windows 8. A local Group Policy on Computer1 contains an application control policy that allows App1. 
You join Computer1 to the domain. 
You need to prevent App1 from running on Computer1. 
What should you do?

  • A: From Computer1, run gpupdate/force.
  • B: From Group Policy Management, add an application control policy to GP1.
  • C: From Group Policy Management, enable the Enforced option on GP1.
  • D: In the local Group Policy of Computer1, configure a software restriction policy.



Question 10
Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either Windows 7 or Windows 8.1. 
You create a Group Policy object (GPO) named GP1. 
You link GP1 to the AllComputers OU. 
You need to ensure that GP1 applies only to computers that have more than 8 GB of memory. 
What should you configure?

  • A: The Security settings of GP1
  • B: The Block Inheritance option for AllComputers
  • C: The Security settings of AllComputers
  • D: The WMI filter for GP1









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset