Download Enterprise Routing and Switching, Professional (JNCIP-ENT).JN0-647.SelfTestEngine.2019-01-20.45q.vcex

Vendor: Juniper
Exam Code: JN0-647
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Date: Jan 20, 2019
File Size: 5 MB
Downloads: 1
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
Click the Exhibit.  
  
Router1, in peer AS 65001, advertises routes to R2 using EBGP. R2 advertises the routes learned from R1 to R3 using IBGP. R3 is configured as a route reflector with routers R6 and R7 as clients. 
Referring to the exhibit, to which routers will R3 advertise the BGP routes received from R2?
  1. R6, R7
  2. R4, R5
  3. R2, R4, R5, R6, R7
  4. R4, R5, R6, R7
Correct answer: D
Question 2
Click the Exhibit. 
  
  
Referring to the exhibit which two statements are true? (Choose two.)
  1. Untagged control packets entering interface ge-0/0/1 are not recognized.
  2. Untagged data packets entering interface ge-0/0/2 will be tagged with VLAN ID 20.
  3. Untagged control packets entering interface ge-0/0/3 are passed without a VLAN tag.
  4. Untagged data packets entering interface ge-0/0/3 will be tagged with VLAN ID 1.
Correct answer: BD
Question 3
When configuring class of service, what would you use to allocate bandwidth to a forwarding class?
  1. Buffer depth
  2. Transmit rate
  3. Bandwidth
  4. Speed
Correct answer: B
Question 4
Click the Exhibit.  
  
Which AS path matches the AS path regular expression shown in the exhibit?
  1. 65100     65200    21870   21870
  2. 65100     65101     65200   21870   21870
  3. 65100     52870     65200   65300
  4. 65100     65101    65200    65300    21870
Correct answer: D
Question 5
A new PoE+VoIP handset was added to an EX Series device. The handset is experiencing connectivity issues. The EX Series device’s committed configuration includes the set PoE interface all telemetry command. You look at the telemetry log in the device to review power consumption and you notice entries have not been occurring for days.  
What would cause telemetry logging to stop?
  1. Telemetry logging only occurs for one hour by default.
  2. Telemetry logging stops when all reserved power for PoE has been consumed.
  3. Telemetry logging only works on Enhanced PoE VoIP handsets.
  4. Telemetry logging stops when the logging file reaches 128 KB.
Correct answer: A
Question 6
Click the Exhibit. 
  
A customer is concerned that the route damping policy on routes with prefixes greater than/17 is allowing too many flaps to occur. The customer does not want to change the default timer.  
Referring to the exhibit, which two actions would allow fewer flaps per route? (Choose two.)
  1. Increase the suppress parameter to 3500.
  2. Decrease the suppress parameter to 2000.
  3. Increase the half-life parameter to 45.
  4. Decrease the half-life parameter to 15.
Correct answer: BC
Question 7
Click the Exhibit.  
  
Referring to the exhibit, you have EBGP peerings with both ISP1 and ISP2. You are receiving the 172.25.12.0/24, 172.25.13.0/24, 172.25.14.0/24, and 172.25.15.0/24 routes through both neighbors. You must ensure that traffic to these prefixes are load balances through both service providers. You have configured a load-balancing policy and have applied it to the forwarding table, but the prefixes are not being load balanced. 
What is required to accomplish this task?
  1. The multihop feature should be enabled between both neighbors.
  2. The multipath multiple-as feature should be used between both neighbors.
  3. The as-override feature should be used between both neighbors.
  4. The include-mp-next-hop feature should be used between both neighbors.
Correct answer: B
Question 8
Which protocol is used for port-level access control and authentication?
  1. MD5
  2. IPsec
  3. 802.1X
  4. AES
Correct answer: C
Question 9
Click the Exhibit.  
  
Referring to the exhibit, you are receiving multiple routes from ISP3 through two EBGP neighbors. You must ensure that all traffic leaving R1 destined to the networks advertised by ISP3 go through ISP2. 
What should you do on R1 to accomplish this task?
  1. Create and apply an import policy to set the local preference on routes learned from ISP2 to be lower than those learned from ISP1.
  2. Create and apply an import policy to set the route preference on routes learned from ISP2 to be lower than those learned from ISP1.
  3. Create and apply an import policy to set the route preference on routes learned from ISP2 to be higher than those learned from ISP1.
  4. Create and apply an import policy to set the local preference on routes learned from ISP2 to be higher than those learned from ISP1.
Correct answer: D
Question 10
Click the Exhibit.  
  
Referring to the exhibit, which two statements are correct? (Choose two.)
  1. The satellite device has two ports that are not online.
  2. The satellite device has 14 network-facing ports available.
  3. The satellite device is in a state of transition.
  4. The satellite device can support up to 48 total ports.
Correct answer: AD
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!