Download Enterprise Routing and Switching, Professional (JNCIP-ENT).JN0-647.Pass4Sure.2019-06-14.46q.vcex

Vendor: Juniper
Exam Code: JN0-647
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Date: Jun 14, 2019
File Size: 2 MB
Downloads: 1
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
Your network supports multicast traffic but your provider network does not. You want to allow multicast hosts outside of your network to receive multicast traffic sourced within your network. 
How would you satisfy this requirement?
  1. Use MSDP peering with your provider.
  2. Use AutoVPN to connect to the remote hosts.
  3. Use an MP-BGP session to your provider to pass multicast traffic.
  4. Use an automatic multicast tunnel gateway at the edge of your network.
Correct answer: D
Question 2
Click the Exhibit. 
  
  
Referring to the exhibit, which set of interfaces will be registered by MVRP?
  1. ge-0/1/0, ge-0/1/1, ae0, ae1
  2. ge-0/1/0, ge-0/0/2, ae0, ae1
  3. ge-0/0/1, ge-0/1/1, ae0, ae1
  4. ge-0/0/1, ge-0/0/2, ae0, ae1
Correct answer: D
Question 3
Click the Exhibit button. 
  
Referring to the exhibit, what is the minimum number of MSTP regions where the topology would be implemented?
  1. 3
  2. 1
  3. 2
  4. 0
Correct answer: B
Question 4
Click the Exhibit button. 
  
You are asked to advertise the 1.0.0.0/8 and 1.5.5.5/32 routes to your 10.254.32.2 BGP peer. 
Referring to the exhibit, which configuration change would satisfy this requirement?
  1. Remove the export-to- as81 policy.
  2. Change the export-to- as81 policy to or longer.
  3. Remove the reject-routes policy.
  4. Change the reject-routes policy to longer.
Correct answer: B
Question 5
What allows non-Web enabled devices to access the network on a port configured for captive portal?
  1. A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive portal process.
  2. LLDP can be used to query the type of device that is attempting to access the network, and predefined device types can be allowed to bypass the captive portal process.
  3. Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a port to allow on-HTTP enabled devices access to the network.
  4. Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.
Correct answer: A
Question 6
Click the Exhibit button.  
  
Router1, in peer AS 65001, advertises routes to R2 using EBGP. R2 advertises the routes learned from R1 to R3 using IBGP. R3 is configured as a route reflector with routers R6 and R7 as clients. 
Referring to the exhibit, to which routers will R3 advertise the BGP routes received from R2?
  1. R6, R7
  2. R4, R5
  3. R2, R4, R5, R6, R7
  4. R4, R5, R6, R7
Correct answer: D
Question 7
Click the Exhibit button. 
  
  
Referring to the exhibit which two statements are true? (Choose two.)
  1. Untagged control packets entering interface ge-0/0/1 are not recognized.
  2. Untagged data packets entering interface ge-0/0/2 will be tagged with VLAN ID 20.
  3. Untagged control packets entering interface ge-0/0/3 are passed without a VLAN tag.
  4. Untagged data packets entering interface ge-0/0/3 will be tagged with VLAN ID 1.
Correct answer: BD
Question 8
Click the Exhibit button. 
 
Which AS path matches the AS path regular expression shown in the exhibit?
  1. 65100     65200    21870   21870
  2. 65100     65101     65200   21870   21870
  3. 65100     21870     65200   65300
  4. 65100     65101    65200    65300    21870
Correct answer: B
Question 9
A new PoE+VoIP handset was added to an EX Series device. The handset is experiencing connectivity issues. The EX Series device’s committed configuration includes the set PoE interface all telemetry command. You look at the telemetry log in the device to review power consumption and you notice entries have not been occurring for days.  
What would cause telemetry logging to stop?
  1. Telemetry logging only occurs for one hour by default.
  2. Telemetry logging stops when all reserved power for PoE has been consumed.
  3. Telemetry logging only works on Enhanced PoE VoIP handsets.
  4. Telemetry logging stops when the logging file reaches 128 KB.
Correct answer: A
Question 10
Click the Exhibit button. 
  
A customer is concerned that the route damping policy on routes with prefixes greater than/17 is allowing too many flaps to occur. The customer does not want to change the default timer.  
Referring to the exhibit, which two actions would allow fewer flaps per route? (Choose two.)
  1. Increase the suppress parameter to 3500.
  2. Decrease the suppress parameter to 2000.
  3. Increase the half-life parameter to 45.
  4. Decrease the half-life parameter to 15.
Correct answer: BC
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!