Download Enterprise Routing and Switching, Professional (JNCIP-ENT).JN0-647.CertKey.2019-03-02.75q.vcex

Vendor: Juniper
Exam Code: JN0-647
Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)
Date: Mar 02, 2019
File Size: 7 MB
Downloads: 1
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
Your network provider supports multicast traffic but your provider network does not. You want to allow multicast hosts outside of your network to receive multicast traffic sourced within your network. 
How would you satisfy this requirement?
  1. Use MSDP peering with your provider.
  2. Use AutoVPN to connect to the remote hosts.
  3. Use an MP-BGP session to your provider to pass multicast traffic.
  4. Use an automatic multicast tunnel gateway at the edge of your network.
Correct answer: D
Question 2
  
Referring to the exhibit, traffic handled by the s-1 scheduler is out of profile.  
Assuming bandwidth is available in this scenario, which statement is correct?
  1. Traffic handled by the s-1 scheduler is serviced immediately after traffic being serviced by the s-4 scheduler.
  2. Traffic handled by the s-1 scheduler is serviced immediately before traffic being serviced by the s-4 scheduler.
  3. Traffic handled by the s-1 scheduler is serviced immediately before traffic being serviced by the s-2 scheduler.
  4. Traffic handled by the s-1 scheduler is serviced immediately after traffic being serviced by the s-2 scheduler.
Correct answer: D
Question 3
  
  
Referring to the exhibit, which set of interfaces will be registered by MVRP?
  1. ge-0/1/0, ge-0/1/1, ae0, ae1
  2. ge-0/1/0, ge-0/0/2, ae0, ae1
  3. ge-0/0/1, ge-0/1/1, ae0, ae1
  4. ge-0/0/1, ge-0/0/2, ae0, ae1
Correct answer: D
Question 4
  
  
  
  
You are configuring a new BGP session between router1 and router2. The session does not establish. 
Referring to the exhibit, what must be done to establish this session?
  1. You must define the peer-as number on router2.
  2. You must define the autonomous- system number under the [edit routing-options] hierarchy on router1.
  3. You must specify type as external on both devices.
  4. You must specify the local-address on both devices.
Correct answer: D
Question 5
Which router ID is correct for OSFPv3?
  1. 0.0.0.0
  2. 2001:123:6::1
  3. ::172.16.1.1
  4. 172.16.1.1
Correct answer: D
Question 6
Which type of BGP is used to peer with a different autonomous system?
  1. external
  2. classless
  3. dynamic
  4. static
Correct answer: A
Question 7
  
Referring to the exhibit, what is the minimum number of MSTP regions where the topology would be implemented?
  1. 3
  2. 1
  3. 2
  4. 0
Correct answer: B
Question 8
  
You are asked to advertise the 1.0.0.0/8 and 1.5.5.5/32 routes to your 10.254.32.2 BGP peer. 
Referring to the exhibit, which configuration change would satisfy this requirement?
  1. Remove the export-to- as81 policy.
  2. Remove the export-to- as81 policy to or longer.
  3. Remove the reject-routes policy.
  4. Remove the reject-routes policy to longer.
Correct answer: B
Question 9
Your campus EX9200 core devices are highly oversubscribed on bandwidth ans reporting massive dropped packets. To immediately address the issue, you decide to implement shaping on all interfaces. 
Which action will accomplish?
  1. Apply the input-shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.
  2. Define a CoS input traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
  3. Define a CoS output traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
  4. Apply the shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.]
Correct answer: D
Question 10
What allows non-Web enabled devices to access the network on a port configured for captive portal?
  1. A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive portal process.
  2. LLDP can be used to query the type of device that is attempting to access the network, and predefined device types can be allowed to bypass the captive portal process.
  3. Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a port to allow on-HTTP enabled devices access to the network.
  4. Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.
Correct answer: A
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!