Download Service Provider Routing and Switching, Specialist (JNCIS-SP).JN0-361.PracticeTest.2018-01-12.65q.vcex

Vendor: Juniper
Exam Code: JN0-361
Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)
Date: Jan 12, 2018
File Size: 5 MB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
Click the Exhibit.  
The router with the configuration shown in the exhibit has two interfaces, both of which are operational and can pass traffic. These interfaces are connected to two different routers, both of which are configured for OSPF area 0.0.0.1. The router has received LSAs and can now send traffic into the backbone area. 
Which two statements are correct? (Choose two.) 
   
  1. The router is an ASBR.
  2. The router has only a single OSPF adjacency.
  3. The router is an ABR.
  4. The router has two OSPF adjacencies.
Correct answer: BC
Question 2
What is the TTL value for EBGP?
  1. 64
  2. 48
  3. 255
  4. 1
Correct answer: D
Question 3
What is the OSPFv3 router ID?
  1. 0.0.0.0
  2. 192.168.1.1
  3. 2001::1:2
  4. 2001::192.168.1.1
Correct answer: B
Question 4
Because of recent network failures, additional circuits have been purchased. In addition, Fast reroute has been configured on critical MPLS LSPs. 
When the next failure occurs, which two time intervals will affect fast reroute? (Choose two.)
  1. The amount of time required to reroute the traffic onto the detour
  2. The amount of time to detect a link or node failure
  3. The amount of time required to recalculate the best detour
  4. The amount of time it takes to ping the gateway on the detour link
Correct answer: AB
Question 5
What must be configured for all IBGP speakers in an AS to have consistent routing information?
  1. Partial mesh of EBGP sessions between EBGP speakers
  2. Default routes to the IBGP gateways
  3. Static routes to the EBGP gateways
  4. Full mesh of IBGP sessions between IBGP speakers
Correct answer: D
Question 6
You must configure an MX Series device to receive and forward a mixture of single-tag and dual-tag frames on interface xe-0/0/0. 
In this scenario what will accomplish goal?
  1. xe-0/0/0 { 
    flexible-vlan-tagging; 
    }
  2. xe-0/0/0 { 
    stacked-vlan-tagging; 
    }
  3. xe-0/0/0 { 
    vlan-vci-tagging; 
    }
  4. xe-0/0/0 { 
    vlan-tagging; 
    }
Correct answer: A
Question 7
Click the Exhibit. 
   
You have configured the IBGP group shown in the exhibit. However, committing your configuration fails. 
Which parameter should you add to the IBGP group configuration to correct the problem?
  1. Type external
  2. Type internal
  3. Export <policy name>
  4. As -override
Correct answer: B
Question 8
Click the exhibit. 
  
 
You have configured OSPF between two routers. The OSPF adjacency will not form.  
Referring to the exhibit, what is the problem?
  1. Router is not receiving hellos on the configured interface.
  2. The OSPF version does not match on the configured interfaces.
  3. The router is not sending hellos on the configured interface.
  4. The area does not match on the configured interfaces.
Correct answer: D
Question 9
Click the Exhibit. 
   
Referring to the configuration in the exhibit, which statement is true?
  1. The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.
  2. The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route 192.168.5.0/24 to be active.
  3. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
  4. The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active.
Correct answer: B
Question 10
Which two statements are correct about default BGP route propagation? (Choose two.)
  1. IBGP speakers advertise IBGP-learned routes to other IBGP peers.
  2. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using a policy.
  3. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
  4. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
Correct answer: BC
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!