Download IBM Integration Bus v10.0 Solution Development.C9530-001.PracticeTest.2019-02-09.52q.vcex

Vendor: IBM
Exam Code: C9530-001
Exam Name: IBM Integration Bus v10.0 Solution Development
Date: Feb 09, 2019
File Size: 289 KB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
How can WebSphere Service Registry & Repository (WSRR) information be pre-loaded into the IBM Integration BUS (IIB) cache before sending any messages to the message flow?
  1. By subscribing to WSRR notifications.
  2. Adding predefinedCacheQueries to a custom policy within WSRR.
  3. By using the predefinedCacheQueries parameter in the Configurable Services for the broker.
  4. WSRR data cannot be loaded into the IIB cache without sending a message that accesses the WSRR node.
Correct answer: C
Explanation:
Enabling cache preloading After the query file is created and placed on the server, configure the broker to use the text file at execution group start up. The change properties command will be used to achieve this and is accomplished by running the following command:Command to enable preloading of the WSRR cache from file mqsichangeproperties <broker_name> -c ServiceRegistries -p "<wsrr_query_text_file>" -o DefaultWSRR -n predefinedCacheQueries Replace <broker_name> with the name of the broker that is being used. Replace <wsrr_query_text_file> with the absolute file path location and name of the query file. References: https://www.ibm.com/developerworks/websphere/library/techarticles/1404_smithson7/1404_smithson7.html
Enabling cache preloading 
After the query file is created and placed on the server, configure the broker to use the text file at execution group start up. The change properties command will be used to achieve this and is accomplished by running the following command:
Command to enable preloading of the WSRR cache from file 
mqsichangeproperties <broker_name> -c ServiceRegistries -p 
"<wsrr_query_text_file>" -o DefaultWSRR -n predefinedCacheQueries 
Replace <broker_name> with the name of the broker that is being used. Replace <wsrr_query_text_file> with the absolute file path location and name of the query file. 
References: https://www.ibm.com/developerworks/websphere/library/techarticles/1404_smithson7/1404_smithson7.html
Question 2
When using the set of aggregation nodes, how does a developer tie the fan-out flow with the fan-in flow when it is included within the same message flow?
  1. No properties need to be set, since the fan-out and fan-in flows are in the same messages flow.
  2. Set the Aggregate Name property of the AggregateReply Node to the same value that you set for the Aggregate Name property in the corresponding Collector Node.
  3. Set the Aggregate Name property of the AggregateReply Node to the same value that you set for the Aggregate Name property in the corresponding AggregateControl Node.
  4. Set the Aggregate Name property of the AggregateReply Node to the same value that you set for the Aggregate Name property on each of the corresponding AggregateRequest Nodes in the fan-out flow.
Correct answer: C
Explanation:
Set the Aggregate Name property of the AggregateReply node to the same value that you set for the Aggregate Name property in the corresponding AggregateControl node in the fan-out flow. References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ac12311_.htm
Set the Aggregate Name property of the AggregateReply node to the same value that you set for the Aggregate Name property in the corresponding AggregateControl node in the fan-out flow. 
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ac12311_.htm
Question 3
In the User Trace output shows the following message:
2016-04-12  16:17:18.242605   5344  UserTrace  BIP2539I:  Node
'Reply.MapToRequestor':
Evaluating expression ''I + 1'' 
at 
('MapToRequestor.CopyMessageHeaders',  '6.14').  This resolved to ''1 + 1''. The result was ''2''. 
What does 6.14 indicate here?
  1. Line 6, Column 14 in the CopyMessageHeaders node.
  2. Line 14, Column 6 in CopyMessageHeaders node.
  3. Column 6, line 14 in the CopyMessageHeaders function of MapToRequestor.
  4. Line 6, Column 14 in the CopyMessageHeaders function of MapToRequestor.
Correct answer: D
Explanation:
References such as '6.14' apply to the row and column number within a function that specify the location of the command that is being executed; in this case, row 6, column 14. Example:2005-07-12 16:17:18.242605       5344   UserTrace   BIP2539I: Node 'Reply.MapToRequestor':Evaluating expression ''I'' at ('.MapToRequestor.CopyMessageHeaders', '6.12'). This resolved to ''I''. The result was ''1''. References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/au14320_.htm
References such as '6.14' apply to the row and column number within a function that specify the location of the command that is being executed; in this case, row 6, column 14. 
Example:
2005-07-12 16:17:18.242605       5344   UserTrace   BIP2539I: Node 'Reply.MapToRequestor':
Evaluating expression ''I'' at 
('.MapToRequestor.CopyMessageHeaders', 
'6.12'). This resolved to ''I''. The 
result was ''1''. 
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/au14320_.htm
Question 4
A developer plans to create two new message flows. Flow1 that uses TimeoutControl and TimeoutNotification nodes in Controlled mode, and Flow2 that uses only the TimeoutNotification node in Automatic mode. 
The Integration Node is installed on a system without IBM MQ installed. What problems will the developer encounter?
  1. Flow1 will not deploy successfully. Flow2 will not deploy successfully.
  2. Flow1 will not deploy successfully. Flow2 will deploy and execute successfully.
  3. Flow1 will not deploy successfully. Flow2 will deploy successfully but will produce an error when execution is attempted.
  4. Flow1 will deploy successfully but produce an error when execution is attempted. Flow2 will deploy and execute successfully.
Correct answer: B
Explanation:
Information about the state of in-flight messages is held on storage queues that are controlled by WebSphere MQ, so you must install WebSphere MQ on the same computer as your integration node if you want to use the capabilities provided by the TimeoutControl node. References: https://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.etools.mft.doc/bc28150_.htm
Information about the state of in-flight messages is held on storage queues that are controlled by WebSphere MQ, so you must install WebSphere MQ on the same computer as your integration node if you want to use the capabilities provided by the TimeoutControl node. 
References: https://www.ibm.com/support/knowledgecenter/SSMKHH_10.0.0/com.ibm.etools.mft.doc/bc28150_.htm
Question 5
While developing a REST API what node should a developer use to receive messages?
  1. MQInput Node
  2. JMSInput Node
  3. HTTPInput Node
  4. SOAPInput Node
Correct answer: C
Explanation:
Each resource in the REST API has a set of operations that can be called by an HTTP client. An operation in a REST API has a name and an HTTP method (such as GET, POST, or DELETE). Use the HTTPInput node to receive an HTTP message from an HTTP client for processing by a message flow. References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/bi12017_.htm
Each resource in the REST API has a set of operations that can be called by an HTTP client. An operation in a REST API has a name and an HTTP method (such as GET, POST, or DELETE). 
Use the HTTPInput node to receive an HTTP message from an HTTP client for processing by a message flow. 
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/bi12017_.htm
Question 6
Which statement regarding security profiles is true?
  1. Multiple security providers cannot be created in one security profile.
  2. A security profile can be created for LDAP or a WS-Trust V1.3 STS.
  3. The command mqsichangeconfigurableservice can be used to change a security profile.
  4. If WS-Trust v1.3.STS is selected for more than one operation, the WS-Trust URL must be different and unique for each of the operations.
Correct answer: B
Explanation:
You can create a security profile for use with Lightweight Directory Access Protocol (LDAP) or a WS-Trust V1.3 compliant security token server (STS), such as Tivoli Federated Identity Manager (TFIM) V6.2. Support is also provided for TFIM V6.1, for compatibility with previous versions of IBM Integration Bus. You can create the security profile by using either the mqsicreateconfigurableservice command or an editor in the IBM Integration Explorer. References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ap04170_.htm
You can create a security profile for use with Lightweight Directory Access Protocol (LDAP) or a WS-Trust V1.3 compliant security token server (STS), such as Tivoli Federated Identity Manager (TFIM) V6.2. Support is also provided for TFIM V6.1, for compatibility with previous versions of IBM Integration Bus. You can create the security profile by using either the mqsicreateconfigurableservice command or an editor in the IBM Integration Explorer. 
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/ap04170_.htm
Question 7
What are two options for creating an MQEndpoint policy? (Select 2.)
  1. Use the BAR file editor.
  2. Use Integration Bus Explorer.
  3. Use the mqsicreatepolicy command.
  4. Use the mqsiattachpolicy command.
  5. Use the Integration Bus web user interface.
Correct answer: CE
Explanation:
You can use the following tools to create, attach, and manage MQEndpoint policies:Command line To create a policy, use the mqsicreatepolicy command. For more information, see Creating and importing policies. Web user interface (UI) IBM Integration Toolkit Representational State Transfer (REST) application programming interface (API) References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/bi62102_.htm
You can use the following tools to create, attach, and manage MQEndpoint policies:
  • Command line 
To create a policy, use the mqsicreatepolicy command. For more information, see Creating and importing policies. 
  • Web user interface (UI) 
  • IBM Integration Toolkit 
  • Representational State Transfer (REST) application programming interface (API) 
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/bi62102_.htm
Question 8
A developer has used version and keyword information to keep track of the different Integration solutions being developed. What command is used to display this information? 
  1. mqsilist
  2. mqsireadbar
  3. mqsiversion
  4. mqsiservice
Correct answer: B
Explanation:
Use the mqsireadbar command to read a deployable BAR file and identify its defined keywords. The command displays the version of the command that is being run (either IBM Integration Toolkit or runtime environment), before all other response data:BIP1052I: Reading BAR File using runtime mqsireadbarIncorrect Answers:A: Use the mqsilist command to list installed brokers and their associated resources.References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/an26160_.htm
Use the mqsireadbar command to read a deployable BAR file and identify its defined keywords. 
The command displays the version of the command that is being run (either IBM Integration Toolkit or runtime environment), before all other response data:
BIP1052I: Reading BAR File using runtime mqsireadbar
Incorrect Answers:
A: Use the mqsilist command to list installed brokers and their associated resources.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_9.0.0/com.ibm.etools.mft.doc/an26160_.htm
Question 9
Which statement about the XSLTransform node is true?
  1. The output of an XSLTransform node is always structured in XML.
  2. The XSLTransform node can transform a binary input message into an XML message.
  3. In the XSLTransform node, external functions can be called to enrich the transformation.
  4. The XSLTransform node can sort the data using the rules defined in the XSLT style sheet.
Correct answer: D
Explanation:
Use the XSLTransform node (formerly known as the XMLTransformation node) to transform an input XML message into another format using XSLT style sheets and to set the message domain, message set, message type, and message format for the generated message. It is imperative that the data can be parsed into an XML message. The style sheet, using the rules that are defined in it, can perform the following actions:Sort the data Select data elements to include or exclude based on some criteria Transform the data into another format Incorrect Answers:B: Use the XSLTransform node to transform an XML message to another form of message.References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/ac34058_.htm
Use the XSLTransform node (formerly known as the XMLTransformation node) to transform an input XML message into another format using XSLT style sheets and to set the message domain, message set, message type, and message format for the generated message. It is imperative that the data can be parsed into an XML message. The style sheet, using the rules that are defined in it, can perform the following actions:
  • Sort the data 
  • Select data elements to include or exclude based on some criteria 
  • Transform the data into another format 
Incorrect Answers:
B: Use the XSLTransform node to transform an XML message to another form of message.
References: https://www.ibm.com/support/knowledgecenter/en/SSMKHH_10.0.0/com.ibm.etools.mft.doc/ac34058_.htm
Question 10
While processing messages in a message flow, Java exceptions are encountered. Where should more details on these Java exceptions be found?
  1. syslogs
  2. Trace Node output
  3. Integration Node stderr and stdout
  4. Integration Server stderr and stdout
Correct answer: A
Explanation:
When a node in a message flow throws an exception this is assigned a BIP number. As the exception is propagated up the flow, possibly being processed by various exception handling routines attached to the catch terminal of nodes it may be "wrapped" in several outer exceptions. This forms a "stack" of exceptions known as an ExceptionList. If an exception reaches an input node without being handled by any branch of the flow then the input transaction is rolled back and each message in the ExceptionList is output to the syslog. References: https://developer.ibm.com/integration/docs/ibm-integration-bus/troubleshooting/diagnostic-tools/
When a node in a message flow throws an exception this is assigned a BIP number. As the exception is propagated up the flow, possibly being processed by various exception handling routines attached to the catch terminal of nodes it may be "wrapped" in several outer exceptions. This forms a "stack" of exceptions known as an ExceptionList. 
If an exception reaches an input node without being handled by any branch of the flow then the input transaction is rolled back and each message in the ExceptionList is output to the syslog. 
References: https://developer.ibm.com/integration/docs/ibm-integration-bus/troubleshooting/diagnostic-tools/
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!