Download AIX Administration V1.C9010-022.RealExams.2018-10-05.33q.vcex

Vendor: IBM
Exam Code: C9010-022
Exam Name: AIX Administration V1
Date: Oct 05, 2018
File Size: 617 KB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
The following output shows that a logical volume was renamed, but the change does not appear to be effective. 
  
What is the most likely cause? 
  1. Only raw logical volumes can be renamed.
  2. The command did not perform the change.
  3. The log device needs to be renamed as well.
  4. The filesystem needs to be remounted.
Correct answer: D
Question 2
An AIX LPAR has been saved using the mksysb command to a file called LPAR1_mksysb located in the /backup directory. 
Which command displays the contents of the mksysb backup?
  1. backup –i –v –f /backup/LPAR1_mksysb
  2. restore qf /backup/LPAR1_mksysb
  3. mksysb –v –f /backup/LPAR1_mksysb
  4. listvgbackup -f /backup/LPAR1_mksysb
Correct answer: D
Explanation:
Reference: https://www-01.ibm.com/support/knowledgecenter/ssw_aix_61/com.ibm.aix.cmds3/listvgbackup.htm
Reference: https://www-01.ibm.com/support/knowledgecenter/ssw_aix_61/com.ibm.aix.cmds3/listvgbackup.htm
Question 3
A customer has a virtualized system using Virtual I/O Server with multiple client partitions accessing the SAN using NPIV? 
Which command on the client partition should be run to retrieve the network address of the fiber adapter?
  1. lscfg-vp –l fcs0
  2. lspci –vafcsi | grep “Network Address”
  3. lspath –npiv fcs0 | grep “Network Address”
  4. lsdev | grep fcs0
Correct answer: A
Question 4
Where is a Cluster Aware AIX cluster configuration data stored?
  1. A NFS filesystem that is accessible by all nodes
  2. A shared disk that is accessible from all nodes.
  3. A master copy on one node and the data is replicated to the local disk of the other nodes
  4. A shared system pool that is accessible by all nodes
Correct answer: B
Explanation:
The cluster repository disk is used as the central repository for the cluster configuration data. The cluster repository disk must be accessible from all nodes in the cluster and is a minimum of 10 GB in size. Given the importance of the cluster configuration data, the cluster repository disk should be backed up by a redundant and highly available storage configuration.  Reference: https://www.ibm.com/developerworks/community/blogs/cgaix/entry/cluster_aware_aix1?lang=en
The cluster repository disk is used as the central repository for the cluster configuration data. The cluster repository disk must be accessible from all nodes in the cluster and is a minimum of 10 GB in size. Given the importance of the cluster configuration data, the cluster repository disk should be backed up by a redundant and highly available storage configuration.  
Reference: https://www.ibm.com/developerworks/community/blogs/cgaix/entry/cluster_aware_aix1?lang=en
Question 5
How can a system administrator verify the progress of an AIX client installation from the NIM master?
  1. nim-o check <client>
  2. lsnim –l<client>
  3. nim –status <client>
  4. tail –f /var/adm/ras/nimclient_<client> 
Correct answer: B
Question 6
What is the minimum version of AIX that is supported as a Versioned WPAR on an AIX 7.1 system? 
  1. AIX 5.3 TL12 SP4
  2. AIX 5.2 TL10 SP8
  3. AIX 6.1 TL3 SP2
  4. AIX 5.1 ML8
Correct answer: B
Question 7
What are the three basic elements of RBAC in AIX?
  1. Groups, Keys, and Access
  2. Users, Groups, and KeyStore
  3. Keys, Privileges, and Groups
  4. Roles, Privileges, and Authorizations
Correct answer: D
Explanation:
Reference: http://www.ibm.com/developerworks/aix/library/au-aix_rbac/
Reference: http://www.ibm.com/developerworks/aix/library/au-aix_rbac/
Question 8
When attempting to log into a system, the administrator receives the message “All network ports in use.” 
How can this be resolved?
  1. Add the terminals tty0 through tty9 to the /etc/securetty file
  2. Use the no command to enable ipforwarding
  3. On the HMC, select the option “Reset Connection” for the server
  4. Use the chdev command to increase the number of pseudo-terminals
Correct answer: C
Question 9
A VIO client will use NPIV to boot from the SAN and needs to be installed using NIM. 
Which two methods can be used to gather the WWPN information? (Choose two.)
  1. Examine the NIM client properties.
  2. Boot the LPAR and run lscfg –vlfcsX
  3. Utilize the HMC command line tool, lssyscfg
  4. Log into the VIO servers and run lscfg –vlfcsX
  5. Check the LPAR properties from the HMC GUI
Correct answer: CD
Explanation:
Question 10
Which file needs to be modified to export a NFS file-system as read-only?
  1. /etc/xtab
  2. /etc/rmtab
  3. /etc/security/exports
  4. /etc/exports
Correct answer: D
Explanation:
Reference: https://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-nfs-server-config-exports.html
Reference: https://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-nfs-server-config-exports.html
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!