Download Aruba Certified Switching Expert Written Exam.HPE6-A69.VCEplus.2022-10-14.60q.vcex

Vendor: HP
Exam Code: HPE6-A69
Exam Name: Aruba Certified Switching Expert Written Exam
Date: Oct 14, 2022
File Size: 5 MB
Downloads: 3
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
Refer to the exhibit.
    
Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and 10.102.26.0/24 
Which statement is true regarding the routing troubleshooting?
  1. Multi-protocol BGP routing needs to be defined for route leaking
  2. Route Distinguisher needs to be set to 1 for default VRF.
  3. Route leaking is supported between non-default VRFs only
  4. Route leaking between default and non-default VRFs is supported with Aruba CX 8400.  
Correct answer: A
Question 2
You have created an OSPF neighbor configuration with ArubaOS-CX 8320 VSX and a third-party switch The OSPF peering falls. In the event togs you see the following entries.
2020-10-28:03:14 20.371489|hpe-routlng|LOG_WARN|AMM|1/5jOSPFV2|OSPFV2iOSPF 268698624 Packet received with unexpected authentication type 2020-10-28:03:14.20.371503|hperouting| LOG_WARN|AMM|1/5|OSPFV2|OSPFV2|Expected authentication type = 0 Which statement is true about the above events?
  1. The ArubaOS-CX switch requires plain-text authentication with OSPF.
  2. The third-party switch should be configured with MD5 authentication
  3. The ArubaOS-CX switch does not expect authentication with OSPF.
  4. The third-party switch should be configured with key chain authentication
Correct answer: D
Question 3
When applying me following access-Iist to an ArubaOS-CX 6300 switch:
    
How does this ACL behave on the selected switch? (Select two.)
  1. The mp traffic to MANAGEMENT-SERVERS group is logged to me event logs
  2. The tftp traffic to MANAGEMENT-SERVERS group is not logged to the event logs.
  3. The snmp-trap traffic to MANAGEMENT-SERVERS is logged to the event togs.
  4. The denied tcp traffic to the MANAGEMENT-SERVERS group is logged to event logs.
  5. The denied tcp traffic to the MANAGEMENT-SERVERS group is not logged to event logs
Correct answer: BE
Question 4
The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices.
The client's default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied.
    
    
  
What advice can you offer the customer? (Select two)
  1. The ISL Bandwidth should be upgraded
  2. Agg-1 and Agg-2's hardware forwarding table profile should be changed to "L3-agg''.
  3. The -system-mac' of Agg-1 should be changed to an unused address from the unicast privateaddress range
  4. The vsx linkup-delay timer is unnecessarily high; it should be reduced to prevent excessive delay of packet forwarding when a VSX peer joins an existing master.
  5. The Keepalive interface should be changed to interface LAG2 so there is redundancy through the mobility cluster.
  6. The keepalive subnet is misconfigured, it has an inappropriate address on Agg-1.
Correct answer: BF
Question 5
(Scenarios may contain multiple errors which may or may not Impact the solution > Refer to the exhibit.
    
An engineer has attempted to configure two pairs of switches in the referenced configuration it is required to implement VSX keep-alive at the aggregation layer.
The ports of the ArubaOS-CS 8325 switches used for Agg01 and Agg02 are populated as follows:
    
  
The configuration of switch AGG01 includes:
    
  
VSX keep-alive is not working. Which modification should you make lo resolve the error condition?
  1. Edit interface 1/1/48, adding the command "vpn-instance KA"
  2. Modify the Interface lag 2 command, removing "multi-chassis"
  3. Modify the Keepalive peer 192.168.20.2 source 192 168.20.1 command, adding "vrf KA"
  4. Edit the vsx-sync command, adding "keep-alive"
Correct answer: B
Question 6
(Scenarios may contain multiple errors which may or may not impact the solution ) Refer to the exhibit.
    
An engineer has attempted to configure two pairs of switches in the referenced configuration It is required to implement VSX at the aggregation layer The pons of the ArubaOS-CX 8325 switches used for Agg01 and Agg02 are populated as follows:
    
  
The configuration of switch AGG01 includes
    
The VSX cluster is not forming. Which modification should you make to resolve the error condition?
  1. Modify the system interface-group 4 speed tOg command change "25g" to "10g"
  2. Modify the keepalive peer 192.168 20.2 source 192 168.20 1 command, changing "vrf KA" to "vrf mgmt"
  3. Edit the vsx-sync command, adding "keep-alive"
  4. Modify the vsx definition, changing "inter-switch-link lag 2" to" inter-switch-link lag 256"
Correct answer: A
Question 7
(Scenarios may contain multiple errors which may or may not impact the solution) Refer to the Exhibit.
    
  
An engineer has attempted to configure two pairs of switches m the referenced configuration it Is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows
    
The configuration includes:
    
  
There is an error message stating "mismatched group speed" What should you add to the configuration to correct the error?
  1. "system Interface-group 1 speed I0g"
  2. "allow-unsupported-transceiver
  3. "speed 10-full" under interfaces 1/1/12 and 1/1/13
  4. "speed 40-full" under interfaces 1/1/49 and 1/1/50
Correct answer: C
Question 8
An administrator is utilizing the orchestration capabilities of NetEdit. What are the two plan types that can be created'' (Select two.)
Configuration management plan
  1. Firmware plan
  2. Firmware plan
  3. Deployment plan
  4. Configuration plan 
Correct answer: AB
Question 9
An administrator has identified a denial of service attack that is stressing the management processor on the switch. 
Which actions can be applied to CoPP to mitigate the issue? (Select two.)
  1. Set the processing priority
  2. Create a policy that matches the payload of GRE traffic.
  3. Regulate traffic from the OOBM Ethernet port
  4. Apply multiple active polices for the classes of traffic
Correct answer: CD
Question 10
Match the repotted status to the Aruba 8325 issue (Each option may Be used once more than once, or not at all)
 
Correct answer: To work with this question, an Exam Simulator is required.
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!