An ArubaOS switch operates at its factory default settings. A network administrator connects the switch to a VLAN with a DHCP server. The switch-to-switch connection carries untagged traffic. The administrator wants to use Telnet log in to the switch CLI.
How should the administrator contact the switch and log in?
Contact the switch at its default IP address 172.16.0.254/24 and log in without entering a password.
Contact the switch at its default IP address 192.168.1.1/24 and log in with me default password admin.
Contact the switch at its DHCP-assigned IP address and log in without entering a password.
Contact the switch at its DHCP-assigned IP address and log in with the default password aruba.
Correct answer: B
Refer to the exhibit.
A network administrator views the configuration files on an ArubaOS switch and sees the output in the exhibit. The administrator enters this command:
Switch# boot system flash primary config config2
After the switch boots, the administrator makes some configuration changes and saves the configuration with the write memory command. The administrator then enters this command:
After the switch boots, the configuration changes just made are not present.
How can the administrator restore the configuration with the changes?
Use the boot set-default command to configure the switch to use the secondary software. Then reboot the switch.
Reboot the switch and interrupt the boot process. Find the temporary file with the configuration changes and apply that file to the startup-config.
Rename the config2 file to config1. Then reboot the switch.
Use the startup-default command to configure the switch to use the config2 file with the primary software. Then reboot the switch.
Correct answer: D
For which task does a network administrator need to access the enable context on an ArubaOS switch?
to view interface statistics
to view CPU statistics
to ping an IP address
to view configuration files
Correct answer: D
A network administrator prepares an ArubaOS switch to be monitored and managed by AirWave.
Which credentials are required for AirWave to change configuration settings on the switch?
RADIUS shared secret
SNMPv2c community with manager unrestricted privileges