Download Delta - Supporting and Servicing HP 3PAR StoreServ Solutions.HP5-K03D.CertDumps.2018-07-24.28q.vcex

Vendor: HP
Exam Code: HP5-K03D
Exam Name: Delta - Supporting and Servicing HP 3PAR StoreServ Solutions
Date: Jul 24, 2018
File Size: 274 KB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
Refer to the exhibit. 
You are installing an HP 3PAR StoreServ 7200 with an additional M6720 drive enclosure. Where should you install four LFF NL disks and four LFF SSDs in the new enclosure for a supported configuration'?
  1. SSD drives in Slot 0, 4, 8, and 12; NL drives in Slot 16, 20, 1, and 5
  2. SSD drives in Slot 0, 4, 8, and 12; NL drives in Slot 3, 7, 11, and 15
  3. NL drives in Slot 0, 1, 2, and 3; SSD drives in Slot 4, 5, 6, and 7
  4. NL drives in Slot 0, 3, 20, and 23; SSD drives in Slot 4, 16, 7, and 19
Correct answer: B
Explanation:
LFF drives must be loaded in pairs of identical drives starting at the bottom of a column, leaving no empty slots between drives in the column. Columns of drives in the M6720 enclosure must be of the same type (SSD or NL) and, for HDDs, the same rotational speed. Drives of differenttypes may not be mixed in a single column. It is permitted to have empty columns between columns containing drives. Different columns do not have to contain the same number of drives
LFF drives must be loaded in pairs of identical drives starting at the bottom of a column, leaving no empty slots between drives in the column. Columns of drives in the M6720 enclosure must be of the same type (SSD or NL) and, for HDDs, the same rotational speed. Drives of differenttypes may not be mixed in a single column. It is permitted to have empty columns between columns containing drives. Different columns do not have to contain the same number of drives
Question 2
A customer has tested an HP 3PAR StoreServ 7000 in a try-and-buy scenario and now wants to buy the system. During the initial setup, the customer decides against a connection to HP 3PAR Central. The customer wants you to enable the connection in Secure Network Mode (SNM). Which port should you enable on the customer's firewall?
  1. 20 (FTP)
  2. 161 (SNMP)
  3. 389 (LDAP)
  4. 443 (HTTPS)
Correct answer: B
Question 3
What is the procedure change when you use HP 3PAR SmartStart during an HP 3PAR StoreServ 7000 installation?
  1. A default password is no longer generated for the 3paradm account.
  2. The serial ports on the system are disabled.
  3. All hosts accessing LUNs on the system must be configured using HP 3PAR SmartStart.
  4. The Virtual Service Processor must be used
Correct answer: C
Question 4
Your customer has a two-node HP 3PAR StoreServ 7400 with two additional drive shelves. They have just purchased an additional 16 SFF drives. What must the customer do when adding the drives to the enclosures'?
  1. Perform an autonomic rebalance after adding the drives,
  2. Run System Tuner on the CPGs using the new drives.
  3. Add a minimum of two drives to each enclosure
  4. Attach the same number and type of drives to each node pair.
Correct answer: D
Question 5
A customer has two HP 3PAR T800 systems with Inform OS v2.3.1 in two separate locations Data is being replicated between systems using Remote Copy. The customer wants you to develop a plan for upgrading the environment to the HP 3PAR OS v3.12. What should you consider in your planning?
  1. All participating systems must be upgraded to the same major OS within 5 weeks.
  2. It is not necessary to stop the Remote Copy groups for online updates.
  3. Downtime must be scheduled because you cannot upgrade online from v2.3 1 to v3.1 2 directly.
  4. Necessary updates to the hosts as required in the Interoperability Matrix can be installed after the Inform OS update.
Correct answer: C
Question 6
To troubleshoot the storage system installation failure of an HP 3PAR StoreServ 7000, HP support requests that you collect some logfiles. Which logfiles do you need to collect? (Select two.)
  1. SPOCC log files
  2. SP log files
  3. SP audit log files
  4. node boot messages log file
  5. SmartStart log files
Correct answer: BE
Explanation:
Reference:http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03607506/c03607506.pdf(see page 53, troubleshooting storage system setup)
Reference:
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03607506/c03607506.pdf(see page 53, troubleshooting storage system setup)
Question 7
You support a leading provider with two new HP 3PAR StoreServ 7200 systems. 
Which statements concerning the disk drive configuration are true? (Select two.)
  1. The DP1 of the HP 3PAR StoreServ 7200 is limited to three expansion drive enclosures.
  2. The disk drives in the node enclosure are connected internally through DP2.
  3. The combined total node and drive enclosure for the HP 3PAR StoreServ 7200 is nine
  4. The DP2 of the HP 3PAR StoreServ 7200 is limited to three expansion drive enclosures.
  5. The minimum addition to a two-node system without expansion drive enclosures is two identical disk drives.
Correct answer: BD
Explanation:
Reference:http://vmfocus.com/2013/03/18/3par-storeserv-7000-hardware-part-3/ (see driver enclosure expansion)
Reference:
http://vmfocus.com/2013/03/18/3par-storeserv-7000-hardware-part-3/ (see driver enclosure expansion)
Question 8
Your customer has an HP 3PAR StoreServ 7200 with an all-SSD configuration. They have a requirement for a second tier of higher capacity 300GB 15K drives You need to add the new FC class drives. What is the minimum number of disks you should include in your solution?
  1. 2
  2. 4
  3. 6
  4. 8
Correct answer: D
Question 9
You are performing an upgrade for a customer who has an HP 3PAR StoreServ 7400 with two nodes. The upgrade must fulfill the customer's following needs 
- more capacity and performance 
- second node pair added to the system 
- capability for the system to use iSCSI and in the future FCoE 
What should you verify before and during the upgrade? (Select two.)
  1. that the storage system is rebalanced before the upgrade
  2. that the first two nodes are running in maintenance mode during the upgrade
  3. that no additional configuration of the CNA cards is necessary
  4. that interconnect cables are directional and are installed correctly
  5. that nodes in a node pair have identical HBA/CNA configurations
Correct answer: DE
Question 10
You are creating a CPG and want to ensure that the HA Cage is available with RAID 5. Which best practice should you follow to achieve this goal?
  1. Daisy-chain all drive enclosures together on both SAS busses.
  2. Confirm that the number of enclosures is equal to or greater than the set size
  3. Choose HA Cage sparing when initializing the storage.
  4. Make a drive enclosure dedicated to parity
Correct answer: B
Explanation:
Reference:http://h20195.www2.hp.com/V2/GetPDF.aspx%2F4AA4-4524ENW.pdf(page 20)
Reference:
http://h20195.www2.hp.com/V2/GetPDF.aspx%2F4AA4-4524ENW.pdf(page 20)
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!