Download Architecting HP FlexNetwork Solutions.HP0-Y50.ExamTopics.2026-05-03.130q.vcex

Vendor: HP
Exam Code: HP0-Y50
Exam Name: Architecting HP FlexNetwork Solutions
Date: May 03, 2026
File Size: 8 MB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
ProfExam Discount

Demo Questions

Question 1
Which scenario would require a company to select HP IMC Enterprise instead of HP IMC Standard?
  1. The company needs a BYOD solution
  2. The company needs a distributed and hierarchical architecture deployment for IMC
  3. The company needs IMC add-on modules
  4. The company needs a complete Fault management, Configuration, Accounting, Performabce, and Security (FCAPS) solution.
Correct answer: B
Question 2
A data center has several legacy IBM mainframes that only support Systems Network Architecture (SNA) traffic. The mainframes are located in different areas of the data center. What should the network architect plan in this solution?
  1. how to prioritize the SNA traffic based on its DSCP in order to ensure low latency communication
  2. how to implement SNA to IP tunneling on the HP server access layer switches
  3. how to implement Edge Virtual Bridging (EVB) to tunnel to SNA traffic securely
  4. how to isolate the mainframes in a VLAN and extend Layer 2 connectivity between them
Correct answer: D
Question 3
In the next year, a customer plans to implement reactive Software-defined Networking (SDN) application. Which technology should the network architect ensure that the proposed network infrastructure devices support?
  1. Transparent Interconnection of Lots of Links (TRILL)
  2. Edge Virtual Bridging (EVB)
  3. OpenFlow
  4. Representation state transfer (REST)
Correct answer: C
Question 4
A network architect is planning to implement SSH to secure management of HP network infrastructure devices. What are the requirements for generating SSH keys on the infrastructure devices and on management stations?
  1. An SSH key must be generated on each infrastructure device. Generating SSH keys on management stations is optional, passwords can be used instead
  2. Generating an SSH key on each infrastructure device is optional. An SSH key must be generated on each management station.
  3. An SSH key must be generated on each infrastructure device and on each management station.
  4. Generating an SSH key on each infrastructure device is optional. Generating SSH keys on management stations is optional; passwords can be used instead.
Correct answer: A
Question 5
Refer to exhibit.
A network architect is proposing an HP 6600 Series router at the core of this enterprise customer network. The router runs Border Gateway Protocol (BGP) and announces the customer network s to the Internet service provider (ISP). The router also runs Open Shortest Path First (OSPF) to communicate with the rest of the customer network.
What is an appropriate method for the HP 6604 router to advertise routes to the other routing switches?
  1. The router should advertise BGP routes into OSPF but filter out all routes except the private network that belongs to the customer.
  2. The router should redistribute BGP routes into OSPF. The Area Border Routes (ABRs) should summarize those routes for the advertisement in areas 1 and 2.
  3. The router should redistribute BGP routes into OSPF. Areas 1 and 2 should be configured as stub areas to filter out the external routes.
  4. The router should advertise a default route as an Autonomous System Border Router (ASBR) summary to other routing devices in area 0.
Correct answer: C
Question 6
For which situation is an optimized three-tier HP FlexCampus topology specifically recommended?
  1. when the company requires a Unified Communication and Collaboration (UC&C) solution
  2. when the company requires a wireless solution
  3. when the campus has multiple large buildings
  4. when the campus has more than 50 switches
Correct answer: B
Question 7
A network architect is choosing transceivers for switch-to-switch fiber links. Which factor affects the architect’s choice?
  1. the length of the cable (distance between switches)
  2. the need to configure the link as part of a distributed trunk
  3. the need to support LACP over aggregated links
  4. the type of fabric module installed in the switch
Correct answer: C
Question 8
Which technology, supported by HP FlexFabric solutions, can extend Layer 2 connectivity across a very large data center infrastructure?
  1. Multi-device connect (MDC)
  2. Shortest Path Bridging MAC-in-MAC mode (SPBM)
  3. Bi-directional Forwarding Detection (BFD)
  4. Edge Virtual Bridging (EVB)
Correct answer: B
Question 9
A network architect is planning to implement weighted fair queuing (WFQ) on an HP 10500 Series switch port. On its own, enabling WFQ on the port does not ensure the correct priority for each queue. What are two important settings to plan?
  1. byte-based or weight-based mode and the minimum guaranteed bandwidth for queues
  2. minimum guaranteed bandwidth for queues and the weight for queues
  3. virtual output queuing (VoQ) mode and the weight for queues
  4. byte-based or weight-based mode and the weight for queues
Correct answer: C
Question 10
A customer has a virtualized data center. The virtual hosts use virtual distributed switches with multiple redundant uplinks, and these uplinks use Link Aggregation Control Protocol (LACP).
Which technology, available in HP switches, enhances high availability in this environment?
  1. Virtual Ethernet Port Aggregator (VEPA) combines redundant server links into a single high-bandwidth trunk
  2. NetStream and sFlow technologies provide the built-in capability to optimize bandwidth flows dynamically
  3. Intelligent Resilient Framework (IRF) allows redundant server links to connect to different physical switches
  4. Fibre Channel over Ethernet (FCoE) allows the virtual hosts to send storage traffic over the server Ethernet uplinks if the FC connection fails
Correct answer: D
Question 11
A network architect is planning an 802.1X solution for a company with a Windows domain. The architect and security team plan how to authenticate employees with their user accounts. They also make a plan for authenticating domain computers.
Why should they make this plan?
  1. A computer might need to connect and receive policies and updates before the user authenticates.
  2. A domain computer authentication plan is required for a guest access solution.
  3. Only computers that are a member of the domain can authenticate with a certificate.
  4. 802.1X always authenticates the device, not the user
Correct answer: C
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!