Download FCP - FortiGate 7.6 Administrator.FCP_FGT_AD-7.6.DumpsBase.2026-05-03.84q.vcex

Vendor: Fortinet
Exam Code: FCP_FGT_AD-7.6
Exam Name: FCP - FortiGate 7.6 Administrator
Date: May 03, 2026
File Size: 12 MB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
ProfExam Discount

Demo Questions

Question 1
An administrator wants to configure dead peer detection (DPD) on IPsec VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when there is no inbound traffic.
Which DPD mode on FortiGate meets this requirement?
  1. Enabled
  2. On Idle
  3. Disabled
  4. On Demand
Correct answer: D
Explanation:
The "On Idle" DPD mode configures FortiGate to send DPD probes only when no inbound traffic is detected, meeting the requirement to send probes only when the tunnel is idle.
Question 2
Which two statements about equal-cost multi-path (ECMP) configuration on FortiGate are true?
(Choose two.)
  1. If SD-WAN is disabled, you can configure the parameter v4-ecmp-mode to volume-based.
  2. If SD-WAN is enabled, you can configure routes with unequal distance and priority values to be part of ECMP.
  3. If SD-WAN is disabled, you configure the load balancing algorithm in config system settings.
  4. If SD-WAN is enabled, you control the load balancing algorithm with the parameter load-balancemode.
Correct answer: C, D
Explanation:
When SD-WAN is disabled, FortiGate supports volume-based ECMP mode via the v4-ecmp-mode parameter.When SD-WAN is enabled, the load balancing algorithm is controlled by the load-balance-mode parameter within the SD-WAN configuration.
Question 3
You have created a web filter profile named restrict media-profile with a daily category usage quota.
When you are adding the profile to the firewall policy, the restrict media-profile is not listed in the available web profile drop down.
What could be the reason?
  1. The firewall policy is in no-inspection mode instead of deep-inspection.
  2. The inspection mode in the firewall policy is not matching with web filter profile feature set.
  3. The web filter profile is already referenced in another firewall policy.
  4. The naming convention used in the web filter profile is restricting it in the firewall policy.
Correct answer: B
Explanation:
Web filter profiles with category usage quotas require the firewall policy to be in proxy-based (deep) inspection mode; if the inspection mode does not match this requirement, the profile will not appear in the drop-down list.
Question 4
Refer to the exhibit.
As an administrator you have created an IPS profile, but it is not performing as expected. While testing you got the output as shown in the exhibit.
What could be the possible reason of the diagnose output shown in the exhibit?
  1. There is a no firewall policy configured with an IPS security profile.
  2. FortiGate entered into IPS fail open state.
  3. Administrator entered the command diagnose test application ipsmonitor 5.
  4. Administrator entered the command diagnose test application ipsmonitor 99.
Correct answer: A
Explanation:
The output shows the IPS engine count as 0, indicating no active IPS engines are running. This typically means no firewall policy is referencing the IPS security profile, so the IPS profile is not being applied or triggered.
Question 5
Refer to the exhibit.
The predefined deep-inspection and custom-deep-inspection profiles exclude some web categories from SSL inspection, as shown in the exhibit.
For which two reasons are these web categories exempted? (Choose two.)
  1. The FortiGate temporary certificate denies the browser's access to websites that use HTTP StrictTransport Security.
  2. These websites are in an allowlist of reputable domain names maintained by FortiGuard.
  3. The resources utilization is optimized because these websites are in the trusted domain list onFortiGate.
  4. The legal regulation aims to prioritize user privacy and protect sensitive information for thesewebsites.
Correct answer: A, D
Explanation:
FortiGate's temporary SSL certificate may cause access denial to sites using HTTP Strict Transport Security (HSTS), so such sites are exempted from deep SSL inspection.Legal regulations require exemption of certain categories to protect user privacy and sensitive information, so these web categories are excluded from SSL inspection.
Question 6
Refer to the exhibit.
The NOC team connects to the FortiGate GUI with the NOC_Access admin profile. They request that their GUI sessions do not disconnect too early during inactivity.
What must the administrator configure to answer this specific request from the NOC team?
  1. Move NOC_Access to the top of the list to ensure all profile settings take effect.
  2. Increase the offline value of the Override Idle Timeout parameter in the NOC_Access admin profile.
  3. Ensure that all NOC_Access users are assigned the super admin role to guarantee access
  4. Increase the admi timeout value under config system accprofile NOC_Access.
Correct answer: D
Explanation:
The admi timeout setting in the admin access profile controls the inactivity timeout for GUI sessions.Increasing this value will extend the session duration before automatic disconnection.
Question 7
Refer to the exhibit.
Based on this partial configuration, what are the two possible outcomes when FortiGate enters conserve mode? (Choose two.)
  1. Administrators cannot change the configuration.
  2. FortiGate skips quarantine actions.
  3. Administrators must restart FortiGate to allow new session.
  4. FortiGate drops new sessions requiring inspection.
Correct answer: B, D
Explanation:
In fail-open mode, FortiGate skips quarantine actions to maintain traffic flow despite IPS or antivirus failures.FortiGate drops new sessions that require inspection when in conserve mode and fail-open is enabled, to protect the network from potentially harmful traffic.
Question 8
What is the primary FortiGate election process when the HA override setting is enabled?
  1. Connected monitored ports > Priority > HA uptime > FortiGate serial number
  2. Connected monitored ports > Priority > System uptime > FortiGate serial number
  3. Connected monitored ports > HA uptime >Priority > FortiGate serial number
  4. Connected monitored ports > System uptime >Priority > FortiGate serial number
Correct answer: A
Explanation:
When HA override is enabled, FortiGate uses the following election order: number of connected monitored ports, then device priority, followed by HA uptime, and finally FortiGate serial number as a tiebreaker.
Question 9
An administrator wanted to configure an IPS sensor to block traffic that triggers a signature set number of times during a-specific time period.
How can the administrator achieve the objective?
  1. Use IPS group signatures, set rate-mode 60.
  2. Use IPS packet logging option with periodical filter option.
  3. Use IPS filter, rate-mode periodical option.
  4. Use IPS signatures, rate-mode periodical option.
Correct answer: D
Explanation:
To block traffic that triggers a signature a specific number of times within a time period, the administrator must configure the IPS signature with the rate-mode periodical option.This allows the IPS to count the number of times a signature is matched in a defined interval and take action (e.g., block) if the threshold is exceeded.
Question 10
A FortiGate firewall policy is configured with active authentication, however, the user cannot authenticate when accessing a website.
Which protocol must FortiGate allow even though the user cannot authenticate?
  1. LDAP
  2. TACASC+
  3. Kerberos
  4. DNS
Correct answer: D
Explanation:
DNS traffic must be allowed so the user can resolve domain names and reach the authentication server or web resources, even if authentication initially fails.
Question 11
Refer to the exhibit, which shows a partial configuration from the remote authentication server.
Why does the FortiGate administrator need this configuration?
  1. To set up a RADIUS server Secret.
  2. To authenticate Any FortiGate user groups.
  3. To authenticate and match the Training OU on the RADIUS server.
  4. To authenticate only the Training user group.
Correct answer: D
Explanation:
The Fortinet-Group-Name attribute is used to restrict authentication to users who belong specifically to the "Training" user group on the RADIUS server.
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!