Download Extreme Networks Specialist (ENS).EW0-300.TestKing.2019-05-03.80q.vcex

Vendor: ExtremeNetworks
Exam Code: EW0-300
Exam Name: Extreme Networks Specialist (ENS)
Date: May 03, 2019
File Size: 32 KB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
When limit-learning is configured on a port and the limit is reached the following traffic still flows to the port.
  1. Packets destined for the active Mac addresses
  2. Broadcast traffic
  3. EDP traffic
  4. All of the above
Correct answer: D
Question 2
The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP and OSI) routers.
  1. True
  2. False
Correct answer: A
Question 3
In OSPF, the router type that is required to connect an area with another area is the
  1. Designated Router
  2. Back-up Designated Router
  3. ASBR
  4. ABR
Correct answer: D
Question 4
On a RADIUS server you can distinguish between switch access and Netlogin authentication. Extreme provides a vendor specific attribute ExtremeExtreme-Netlogin-only =disabled/enabled. 
User authentication for both Netlogin and switch access is allowed when the value is disabled. 
When the value enabled user authentication is restricted to Netlogin only.
  1. True
  2. False
Correct answer: A
Question 5
An LSP is a link state packet used by which routing protocol?
  1. OSPF
  2. RIP
  3. BGP
  4. None of these
Correct answer: D
Question 6
The following CLI command is valid to advertise SLB virtual servers in OSPF ith a cost of 10. 
Enable ospf export vip cost 10
  1. True
  2. False
Correct answer: A
Question 7
Extreme Networks “I” Chipset switches allows you to run simultaneously the Radius and Tacacs+features.
  1. True
  2. False
Correct answer: B
Question 8
OSPF requires that all areas attach directly to the backbone area, and that all attachments are made with a direct physical connection.
  1. True
  2. False
Correct answer: B
Question 9
In SLB, Port Translation Mode is similar to Translation Mode, except that in Port Translation Mode the physical Port where the node connects to must be configured as a Fast Ethernet Half Duplex port.
  1. True
  2. False
Correct answer: B
Question 10
In PIM sparse mode the Bootstrap Router election is based on the highest IP address.
  1. True
  2. False
Correct answer: B
Question 11
When limit-learning is configured on a port and the limit is reached the following traffic still flows to the port.
  1. Packets destined for the active Mac addresses
  2. Broadcast traffic
  3. EDP traffic
  4. All of the above
Correct answer: D
Question 12
The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP and OSI) routers.
  1. True
  2. False
Correct answer: A
Question 13
In OSPF, the router type that is required to connect an area with another area is the
  1. Designated Router
  2. Back-up Designated Router
  3. ASBR
  4. ABR
Correct answer: D
Question 14
On a RADIUS server you can distinguish between switch access and Netlogin authentication. Extreme provides a vendor specific attribute ExtremeExtreme-Netlogin-only =disabled/enabled. 
User authentication for both Netlogin and switch access is allowed when the value is disabled. 
When the value enabled user authentication is restricted to Netlogin only.
  1. True
  2. False
Correct answer: A
Question 15
An LSP is a link state packet used by which routing protocol?
  1. OSPF
  2. RIP
  3. BGP
  4. None of these
Correct answer: D
Question 16
The following CLI command is valid to advertise SLB virtual servers in OSPF ith a cost of 10. 
Enable ospf export vip cost 10
  1. True
  2. False
Correct answer: A
Question 17
Extreme Networks “I” Chipset switches allows you to run simultaneously the Radius and Tacacs+features.
  1. True
  2. False
Correct answer: B
Question 18
OSPF requires that all areas attach directly to the backbone area, and that all attachments are made with a direct physical connection.
  1. True
  2. False
Correct answer: B
Question 19
In SLB, Port Translation Mode is similar to Translation Mode, except that in Port Translation Mode the physical Port where the node connects to must be configured as a Fast Ethernet Half Duplex port.
  1. True
  2. False
Correct answer: B
Question 20
In PIM sparse mode the Bootstrap Router election is based on the highest IP address.
  1. True
  2. False
Correct answer: B
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!