Download Extreme Networks Specialist (ENS).EW0-300.PracticeTest.2018-07-24.86q.vcex

Vendor: ExtremeNetworks
Exam Code: EW0-300
Exam Name: Extreme Networks Specialist (ENS)
Date: Jul 24, 2018
File Size: 34 KB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
In SLB, Port Translation Mode is similar to Translation Mode, except that in Port Translation Mode the physical Port where the node connects to must be configured as a Fast Ethernet Half Duplex port.
  1. True
  2. False
Correct answer: B
Question 2
In PIM sparse mode the Bootstrap Router election is based on the highest IP address.
  1. True
  2. False
Correct answer: B
Question 3
ESRP-enabled switches can utilize either an IP address or an IPX net ID for their protected VLANs.
  1. TRUE
  2. FALSE
Correct answer: A
Question 4
An IP-only IS-IS router (or "IP-only" router) is defined to be
  1. A router which uses IS-IS as the routing protocol for IP
  2. Does not otherwise support OSI protocols
  3. One of the IS-IS router types
  4. All of the above
Correct answer: D
Question 5
On an Extreme Networks switch, how many bits comprise an OSPF area ID?
  1. 32 BITS
  2. 48 BITS
  3. 64 BITS
  4. 128 BITS
Correct answer: A
Question 6
What is the RP-set?
  1. It is the information of which RP are available for what Multicast groups. 
    It is send by the BSR towards all PIM routers
  2. It is the information of which multicast groups are active 
    It is send by the RP towards all PIM routers
  3. It is the information of which BSR are available for what Multicast groups. 
    It is send by RP towards all PIM routers
  4. It is the information, stored by all RP, needed to find the BSR.
Correct answer: A
Question 7
The majority of Extreme Networks switches have a dedicated out of band management port and VLAN. The 10/100BASE-TX Ethernet management port allows you to communicate directly to the CPU of the switch. If you want the switch to forward traffic from the mgmt VLAN to other VLANS you just have to enable ipforwarding on all VLANS including the management VLAN.
  1. TRUE
  2. FALSE
Correct answer: B
Question 8
Which of the following statements fit the description of PIM sparse mode? (choose three that apply)
  1. PIM sparse mode is suitable for network with minimal multicast deployment.
  2. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
  3. In PIM sparse mode the RPF check depends on the tree type
  4. An explicit join is not required in PIM sparse mode.
Correct answer: ABCD
Question 9
How many bits in the IP TOS field does a Summit 48i examine?
  1. 4
  2. 6
  3. 8
  4. 16
Correct answer: B
Question 10
What is the CLI command you would use to configure a VLAN to be protected by ESRP?
  1. enable esrp vlan <vlan>
  2. enable esrp vlan <vlan> detail
  3. config esrp vlan <vlan>
  4. config esrp vlan <vlan> detail
Correct answer: A
Question 11
In SLB, Port Translation Mode is similar to Translation Mode, except that in Port Translation Mode the physical Port where the node connects to must be configured as a Fast Ethernet Half Duplex port.
  1. True
  2. False
Correct answer: B
Question 12
In PIM sparse mode the Bootstrap Router election is based on the highest IP address.
  1. True
  2. False
Correct answer: B
Question 13
ESRP-enabled switches can utilize either an IP address or an IPX net ID for their protected VLANs.
  1. TRUE
  2. FALSE
Correct answer: A
Question 14
An IP-only IS-IS router (or "IP-only" router) is defined to be
  1. A router which uses IS-IS as the routing protocol for IP
  2. Does not otherwise support OSI protocols
  3. One of the IS-IS router types
  4. All of the above
Correct answer: D
Question 15
On an Extreme Networks switch, how many bits comprise an OSPF area ID?
  1. 32 BITS
  2. 48 BITS
  3. 64 BITS
  4. 128 BITS
Correct answer: A
Question 16
What is the RP-set?
  1. It is the information of which RP are available for what Multicast groups. 
    It is send by the BSR towards all PIM routers
  2. It is the information of which multicast groups are active 
    It is send by the RP towards all PIM routers
  3. It is the information of which BSR are available for what Multicast groups. 
    It is send by RP towards all PIM routers
  4. It is the information, stored by all RP, needed to find the BSR.
Correct answer: A
Question 17
The majority of Extreme Networks switches have a dedicated out of band management port and VLAN. The 10/100BASE-TX Ethernet management port allows you to communicate directly to the CPU of the switch. If you want the switch to forward traffic from the mgmt VLAN to other VLANS you just have to enable ipforwarding on all VLANS including the management VLAN.
  1. TRUE
  2. FALSE
Correct answer: B
Question 18
Which of the following statements fit the description of PIM sparse mode? (choose three that apply)
  1. PIM sparse mode is suitable for network with minimal multicast deployment.
  2. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
  3. In PIM sparse mode the RPF check depends on the tree type
  4. An explicit join is not required in PIM sparse mode.
Correct answer: ABCD
Question 19
How many bits in the IP TOS field does a Summit 48i examine?
  1. 4
  2. 6
  3. 8
  4. 16
Correct answer: B
Question 20
What is the CLI command you would use to configure a VLAN to be protected by ESRP?
  1. enable esrp vlan <vlan>
  2. enable esrp vlan <vlan> detail
  3. config esrp vlan <vlan>
  4. config esrp vlan <vlan> detail
Correct answer: A
Question 21
In SLB, Port Translation Mode is similar to Translation Mode, except that in Port Translation Mode the physical Port where the node connects to must be configured as a Fast Ethernet Half Duplex port.
  1. True
  2. False
Correct answer: B
Question 22
In PIM sparse mode the Bootstrap Router election is based on the highest IP address.
  1. True
  2. False
Correct answer: B
Question 23
ESRP-enabled switches can utilize either an IP address or an IPX net ID for their protected VLANs.
  1. TRUE
  2. FALSE
Correct answer: A
Question 24
An IP-only IS-IS router (or "IP-only" router) is defined to be
  1. A router which uses IS-IS as the routing protocol for IP
  2. Does not otherwise support OSI protocols
  3. One of the IS-IS router types
  4. All of the above
Correct answer: D
Question 25
On an Extreme Networks switch, how many bits comprise an OSPF area ID?
  1. 32 BITS
  2. 48 BITS
  3. 64 BITS
  4. 128 BITS
Correct answer: A
Question 26
What is the RP-set?
  1. It is the information of which RP are available for what Multicast groups. 
    It is send by the BSR towards all PIM routers
  2. It is the information of which multicast groups are active 
    It is send by the RP towards all PIM routers
  3. It is the information of which BSR are available for what Multicast groups. 
    It is send by RP towards all PIM routers
  4. It is the information, stored by all RP, needed to find the BSR.
Correct answer: A
Question 27
The majority of Extreme Networks switches have a dedicated out of band management port and VLAN. The 10/100BASE-TX Ethernet management port allows you to communicate directly to the CPU of the switch. If you want the switch to forward traffic from the mgmt VLAN to other VLANS you just have to enable ipforwarding on all VLANS including the management VLAN.
  1. TRUE
  2. FALSE
Correct answer: B
Question 28
Which of the following statements fit the description of PIM sparse mode? (choose three that apply)
  1. PIM sparse mode is suitable for network with minimal multicast deployment.
  2. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
  3. In PIM sparse mode the RPF check depends on the tree type
  4. An explicit join is not required in PIM sparse mode.
Correct answer: ABCD
Question 29
How many bits in the IP TOS field does a Summit 48i examine?
  1. 4
  2. 6
  3. 8
  4. 16
Correct answer: B
Question 30
What is the CLI command you would use to configure a VLAN to be protected by ESRP?
  1. enable esrp vlan <vlan>
  2. enable esrp vlan <vlan> detail
  3. config esrp vlan <vlan>
  4. config esrp vlan <vlan> detail
Correct answer: A
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!