Download CompTIA Server+.CertDumps.SK0-004.2020-08-01.1e.489q.vcex


Download Exam

File Info

Exam CompTIA Server+
Number SK0-004
File Name CompTIA Server+.CertDumps.SK0-004.2020-08-01.1e.489q.vcex
Size 457 Kb
Posted August 01, 2020
Downloads 2



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
A blade chassis can hold 16 half-height blades or eight full-height blades. Which of the following is the MAXIMUM number of half-height blades that can be installed in the chassis if six full-height blades are already installed?

  • A: 2
  • B: 4
  • C: 8
  • D: 16



Question 2
A technician is asked to install an additional NIC in a server. Which of the following hardware considerations would be BEST for the technician to make?

  • A: Power consumption
  • B: Bus type and speed
  • C: CPU stepping
  • D: CAS latency



Question 3
A server technician is replacing a web server in an organization. The new server has two integrated NICs. Which of the following describes how the NICs should be configured for fault protection?

  • A: The NICs should be configured separately with one MAC address.
  • B: The NICs should be placed into a team with one MAC address.
  • C: The NICs should be configured separately with two MAC addresses.
  • D: The NICs should be placed into a team with two MAC addresses.



Question 4
A server administrator is implementing disk redundancy in all database servers. Which of the following RAID configurations should the administrator use so that a MINIMUM number of disks are required?

  • A: RAID 0
  • B: RAID 1
  • C: RAID 5
  • D: RAID 6



Question 5
A server administrator is configuring a new server for an organization. The server will function as a firewall and proxy server, as well as provide NAT services for other devices on the network. Which of the following BEST describes how the network hardware on the server should be configured?

  • A: The server should have at least two NICs: one configured with an IP address on the inside network, and one with an IP address on the outside network.
  • B: The server should have at least two NICs: each NIC should be configured with an IP address on the same network segment.
  • C: The server requires only one NIC, as the NIC can be configured with two IP addresses: one for the inside network segment, and one for the outside network segment.
  • D: The server requires at least three NICs: one configured with an IP address for the intranet clients, one with an IP address on the inside network, and one with an IP address on the outside network.



Question 6
A certain rack mounted blade server chassis needs 3-phase power for operation. There is currently only single-phase power coming into the room. The administrator needs to:

  • A: call an electrician to wire the single-phase power into 3-phase power.
  • B: use a single-phase UPS to power the 3-phase server.
  • C: call an electrician to see if 3-phase power can be brought into the room.
  • D: use an adapter to configure the server to use single-phase power.



Question 7
Which of the following is the MOST redundant power solution?

  • A: Two power supplies, each hooked up to individual legs of one 3-phase circuit.
  • B: Two power supplies, each hooked up to the same 1-phase circuit.
  • C: Two power supplies, each hooked up to separate 1-phase circuits.
  • D: One power supply hooked up to two 1-phase circuits.



Question 8
An administrator is tasked with deploying a server in a telephone switching station. Which of the following voltages will MOST likely be available at the facility?

  • A: -48VDC
  • B: 120VDC
  • C: 220VAC
  • D: 440VAC



Question 9
A system administrator needs to install an operating system onto a new server in a remote location using PXE. Which of the following methods will BEST accomplish this?

  • A: SSH
  • B: RDP
  • C: TFTP
  • D: HTTP



Question 10
A technician is installing an operating system on a server using source files on a USB storage device. The technician is unable to boot to the USB device using different USB ports on the server. Which of the following should the technician do to ensure that the operating system can be installed from the USB storage?

  • A: Copy the source files to a CD
  • B: Install the latest USB device drivers
  • C: Reconfigure the boot order
  • D: Update the BIOS firmware









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset