Download CompTIA Server+.CertDumps.SK0-004.2020-06-29.1e.400q.vcex


Download Exam

File Info

Exam CompTIA Server+
Number SK0-004
File Name CompTIA Server+.CertDumps.SK0-004.2020-06-29.1e.400q.vcex
Size 393 Kb
Posted June 29, 2020
Downloads 1



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
An administrator is securing a secure web server by disabling ports. After completing this process, clients cannot access the secure web server. The administrator should now go back and verify whether which of the following ports is enabled?

  • A: 23
  • B: 389
  • C: 443
  • D: 445



Question 2
A technician is replacing a faulty NIC in a server. According to best practices, which of the following should be used to configure the IP address on the server?

  • A: DNS reservation
  • B: DHCP IP address
  • C: DHCP reservation
  • D: Static IP address



Question 3
Which of the following is a requirement for a server to allow guests to be installed on a hypervisor host?

  • A: Processors with multiple cores
  • B: Processors with available cache
  • C: Processors that support virtualization
  • D: Processors that support hyperthreading



Question 4
A network administrator is installing additional devices on the network. Currently, the network segment is utilizing all allocated IP addresses. If there are additional addresses available, which of the following would be BEST for the network administrator to perform to accommodate the new network devices?

  • A: Create a new DHCP scope for the network segment in question.
  • B: Configure the DHCP server for IPv6.
  • C: Configure the network to use NAT for the network segment in question.
  • D: Increase the size of the DHCP scope for the network segment in question.



Question 5
A system administrator is troubleshooting a network connectivity issue and runs ipconfig/all on the host. The command returns the following:
IPv4 Address: 169.254.0.12
Subnet mask: 255.255.0.0
The client is configured for DHCP. Which of the following commands should be run on the client to resolve this issue? (Select TWO).

  • A: ipconfig/release
  • B: tracert
  • C: ipconfig/flushdns
  • D: ipconfig/renew
  • E: ipconfig/showclassid
  • F: nslookup



Question 6
A technician is assigned a task to configure a new server with six hard drives. The senior administrator requested the technician utilize the drives for maximum fault tolerance. Which of the following RAID configurations should the technician use?

  • A: RAID 3
  • B: RAID 5
  • C: RAID 10
  • D: RAID 0



Question 7
Two RAID arrays are created from eight disks. One is created using RAID 6, the other is created using RAID 5 with a hot spare. Which of the following is the operational difference between these configurations?

  • A: RAID 6 has the ability to recover from two disks simultaneously failing.
  • B: The RAID 5 array will be significantly faster than the RAID 6 array.
  • C: The RAID 6 array will be significantly faster than the RAID 5 array.
  • D: RAID 6 has a higher storage capacity than RAID 5.



Question 8
A technician is experiencing overheating on a rack mounted server. After powering off and removing the cover of the server, a large amount of dust is noticed on one of the fans. After cleaning out the dust and powering the server back on, the server is still overheating. Which of the following would BEST explain this issue?

  • A: The power supply has failed.
  • B: The server is using excessive power.
  • C: The hard drives are running too hot.
  • D: Some of the cooling fans are defective.



Question 9
A technician notices a rack mounted server is beeping without booting up. The NEXT step to diagnose this issue would be to:

  • A: continue to power cycle the server until it boots normally.
  • B: count the beeps and reference the service manual.
  • C: disable the alarm within the server.
  • D: install the server into a different rack.



Question 10
A technician is tasked with providing network-based high availability to a pair of identical web servers. Which of the following minimum server NIC configurations fulfills these requirements?

  • A: Two physical NICs per server: one NIC configured for multicast and one for broadcast.
  • B: One physical NIC per server: each individual NIC configured for network load balancing.
  • C: Two physical NICs per server: one NIC for network traffic, and one for web traffic.
  • D: One physical NIC per server: each NIC configured with the same MAC and IP address.









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset