Download Citrix NetScaler 12 Essentials and Unified Gateway.1Y0-230.SelfTestEngine.2018-09-24.65q.vcex

Vendor: Citrix
Exam Code: 1Y0-230
Exam Name: Citrix NetScaler 12 Essentials and Unified Gateway
Date: Sep 24, 2018
File Size: 86 KB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 2
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 3
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 4
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 5
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 6
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 7
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 8
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 9
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 10
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 11
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 12
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 13
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 14
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 15
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 16
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 17
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 18
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 19
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 20
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 21
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 22
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 23
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 24
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 25
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 26
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 27
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 28
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 29
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 30
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 31
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 32
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 33
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 34
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 35
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 36
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 37
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 38
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 39
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 40
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 41
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 42
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 43
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 44
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 45
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 46
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 47
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 48
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 49
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 50
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 51
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 52
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 53
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 54
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 55
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 56
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 57
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 58
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 59
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 60
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 61
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 62
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 63
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 64
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 65
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 66
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 67
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 68
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 69
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 70
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 71
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 72
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 73
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 74
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 75
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 76
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 77
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 78
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 79
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 80
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 81
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 82
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 83
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 84
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 85
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 86
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 87
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 88
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 89
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 90
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 91
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 92
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 93
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 94
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 95
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 96
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 97
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 98
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 99
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 100
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 101
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 102
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 103
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 104
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 105
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 106
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 107
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 108
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 109
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 110
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 111
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 112
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 113
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 114
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 115
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 116
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 117
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 118
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 119
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 120
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 121
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 122
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 123
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 124
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 125
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 126
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 127
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 128
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 129
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 130
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 131
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 132
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 133
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 134
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 135
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 136
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 137
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 138
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 139
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 140
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 141
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 142
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 143
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 144
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 145
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 146
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 147
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 148
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 149
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 150
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 151
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 152
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 153
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 154
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 155
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 156
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 157
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 158
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 159
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 160
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 161
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 162
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 163
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 164
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 165
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 166
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 167
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 168
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 169
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 170
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 171
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 172
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 173
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 174
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 175
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 176
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 177
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 178
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 179
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 180
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 181
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 182
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 183
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 184
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 185
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 186
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 187
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 188
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 189
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 190
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 191
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 192
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 193
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 194
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 195
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 196
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 197
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 198
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 199
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 200
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 201
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 202
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 203
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 204
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 205
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 206
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 207
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 208
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 209
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 210
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 211
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 212
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 213
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 214
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 215
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 216
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 217
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 218
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 219
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 220
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 221
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 222
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 223
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 224
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 225
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 226
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 227
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 228
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 229
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 230
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 231
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 232
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 233
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 234
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 235
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 236
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 237
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 238
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 239
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 240
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 241
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 242
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 243
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 244
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 245
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 246
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 247
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 248
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 249
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 250
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 251
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 252
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 253
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 254
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 255
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 256
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 257
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 258
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 259
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 260
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 261
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 262
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 263
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 264
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 265
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 266
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 267
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 268
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 269
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 270
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 271
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 272
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 273
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 274
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 275
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 276
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 277
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 278
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 279
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 280
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 281
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 282
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 283
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 284
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 285
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 286
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 287
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 288
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 289
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 290
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 291
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 292
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 293
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 294
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 295
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 296
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 297
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 298
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 299
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 300
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 301
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 302
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 303
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 304
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 305
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 306
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 307
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 308
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 309
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 310
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 311
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 312
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 313
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 314
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 315
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 316
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 317
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 318
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 319
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 320
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 321
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 322
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 323
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 324
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 325
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 326
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 327
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 328
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 329
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 330
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 331
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 332
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 333
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 334
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 335
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 336
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 337
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 338
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 339
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 340
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 341
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 342
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 343
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 344
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 345
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 346
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 347
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 348
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 349
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 350
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 351
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 352
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 353
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 354
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 355
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 356
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 357
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 358
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 359
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 360
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 361
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 362
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 363
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 364
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 365
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 366
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 367
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 368
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 369
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 370
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 371
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 372
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 373
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 374
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 375
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 376
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 377
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 378
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 379
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 380
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 381
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 382
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 383
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 384
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 385
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 386
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 387
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 388
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 389
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 390
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 391
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 392
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 393
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 394
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 395
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 396
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 397
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 398
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 399
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 400
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 401
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 402
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 403
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 404
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 405
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 406
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 407
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 408
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 409
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 410
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 411
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 412
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 413
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 414
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 415
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 416
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 417
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 418
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 419
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 420
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 421
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 422
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 423
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 424
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 425
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 426
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 427
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 428
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 429
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 430
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 431
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 432
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 433
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 434
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 435
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 436
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 437
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 438
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 439
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 440
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 441
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 442
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 443
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 444
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 445
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 446
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 447
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 448
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 449
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 450
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 451
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 452
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 453
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 454
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 455
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 456
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 457
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 458
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 459
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 460
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 461
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 462
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 463
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 464
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 465
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 466
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 467
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 468
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 469
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 470
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 471
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 472
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 473
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 474
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 475
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 476
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 477
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 478
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 479
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 480
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 481
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 482
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 483
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 484
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 485
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 486
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 487
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 488
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 489
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 490
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 491
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 492
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 493
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 494
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 495
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 496
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 497
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 498
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 499
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 500
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 501
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 502
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 503
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 504
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 505
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 506
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 507
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 508
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 509
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 510
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 511
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 512
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 513
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 514
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 515
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 516
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 517
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 518
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 519
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 520
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 521
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 522
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 523
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 524
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 525
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 526
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 527
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 528
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 529
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 530
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 531
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 532
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 533
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 534
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 535
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 536
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 537
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 538
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 539
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 540
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 541
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 542
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 543
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 544
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 545
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 546
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 547
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 548
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 549
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 550
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 551
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 552
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 553
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 554
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 555
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 556
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 557
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 558
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 559
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 560
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 561
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 562
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 563
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 564
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 565
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 566
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 567
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 568
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 569
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 570
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 571
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 572
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 573
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 574
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 575
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 576
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 577
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 578
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 579
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 580
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 581
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 582
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 583
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 584
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 585
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 586
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 587
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 588
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 589
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 590
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 591
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 592
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 593
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 594
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 595
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 596
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 597
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 598
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 599
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 600
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 601
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 602
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 603
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 604
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 605
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 606
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 607
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 608
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 609
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 610
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 611
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 612
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 613
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 614
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 615
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 616
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 617
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 618
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 619
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 620
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 621
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 622
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 623
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 624
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 625
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 626
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 627
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 628
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 629
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 630
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 631
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 632
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 633
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 634
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 635
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 636
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 637
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 638
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 639
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 640
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 641
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 642
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 643
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 644
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 645
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 646
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 647
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 648
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 649
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 650
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 651
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 652
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 653
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 654
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 655
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 656
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 657
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 658
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 659
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 660
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 661
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 662
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 663
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 664
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 665
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 666
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 667
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 668
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 669
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 670
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 671
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 672
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 673
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 674
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 675
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 676
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 677
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 678
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 679
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 680
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 681
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 682
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 683
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 684
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 685
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 686
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 687
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 688
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 689
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 690
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 691
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 692
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 693
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 694
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 695
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 696
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 697
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 698
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 699
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 700
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 701
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 702
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 703
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 704
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 705
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 706
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 707
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 708
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 709
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 710
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 711
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 712
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 713
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 714
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 715
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 716
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 717
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 718
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 719
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 720
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 721
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 722
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 723
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 724
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 725
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 726
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 727
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 728
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 729
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 730
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 731
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 732
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 733
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 734
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 735
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 736
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 737
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 738
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 739
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 740
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 741
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 742
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 743
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 744
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 745
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 746
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 747
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 748
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 749
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 750
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 751
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 752
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 753
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 754
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 755
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 756
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 757
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 758
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 759
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 760
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 761
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 762
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 763
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 764
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 765
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 766
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 767
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 768
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 769
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 770
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 771
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 772
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 773
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 774
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 775
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 776
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 777
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 778
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 779
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 780
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 781
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 782
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable Layer 2 mode on a NetScaler instance.
  2. Enable MAC-based Forwarding mode.
  3. Enable tagging on all interfaces.
  4. Enable Layer 3 mode along with Layer 2 mode.
Correct answer: C
Question 783
To which three bind points can a Citrix Administrator bind a session policy, to enable Clientless access? (Choose three.)
  1. Group
  2. Service
  3. Service Group
  4. User
  5. Virtual server
Correct answer: BDE
Question 784
A Citrix Administrator would like to define granular policies to configure and enforce user environment attributes for XenApp and XenDesktop on NetScaler Gateway. 
Which type of policy would enable this requirement?
  1. SmartAccess
  2. SmartControl
  3. Authorization
  4. Session
Correct answer: B
Explanation:
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Reference: https://docs.citrix.com/en-us/netscaler-gateway/12/integrate-web-interface-apps/smart-control.html
Question 785
Scenario: A NetScaler Appliance is having intermittent issues. A Citrix Administrator is unable to identify the root cause and fix them. The administrator opened a Support ticket and the engineer assigned to the case requested all the logs and configuration information from the NetScaler. 
Which technical support tool can the administrator use to gather all the information on the NetScaler to send to the Support Engineer?
  1. Generate Support File
  2. Batch Configuration
  3. Start New Trace
  4. Get Back Trace
Correct answer: A
Explanation:
Reference: https://support.citrix.com/article/CTX127900
Reference: https://support.citrix.com/article/CTX127900
Question 786
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once. 
What upgrading flexibility does SDX provide in this scenario?
  1. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
  2. The NetScaler instances have to be upgraded at the same time.
  3. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
  4. It is NOT possible to upgrade the NetScaler instances to different firmware versions.
Correct answer: A
Question 787
Scenario: A Citrix Administrator has configured a NetScaler active-passive high availability (HA) pair. When the HA pair fails over, customers are unable to access the hosted websites. After some troubleshooting, the administrator found that the upstream router was NOT updating its ARP table. 
What can the administrator configure to resolve this issue?
  1. Independent Network Configuration (INC) mode
  2. Virtual MAC
  3. HA monitor
  4. Route Monitor
Correct answer: B
Question 788
A Citrix Administrator is configuring a NetScaler high availability (HA) pair and needs to ensure that one NetScaler is UP and primary at all times to ensure the business websites are always available. 
What does the administrator need to do ensure that the NetScalers still handle web traffic in the event that both nodes become unavailable or fail a health check?
  1. Disable HA Fail-safe mode on the Secondary NetScaler.
  2. Configure HA Fail-safe mode on each NetScaler independently.
  3. Disable HA Fail-safe mode on the Primary NetScaler only.
  4. Configure HA Fail-safe mode on the Primary NetScaler only.
Correct answer: D
Explanation:
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Reference: http://www.citrixguru.com/2015/09/14/lab-part-6-configure-netscaler-11-high-availability-ha-pair/
Question 789
Scenario: A Citrix Administrator suspects an attack on a load-balancing virtual server. The administrator needs to restrict access to the load-balancing virtual server (192.168.100.25) for 10 minutes. 
Which Access Control List (ACL) will help to accomplish this requirement? 
  1. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600000
  2. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600
  3. add ns acl rule1 DENY –destIP 192.168.100.25- TTL 600
  4. add simpleacl rule1 DENY- srcIP 192.168.100.25- TTL 600000
Correct answer: C
Explanation:
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Reference: https://docs.citrix.com/ja-jp/netscaler/11/reference/netscaler-command-reference/ns/ns-acl.html
Question 790
Scenario: A Citrix Administrator notices user sessions are disconnecting and reconnecting more often this week than last week, signaling a problem.
The administrator troubleshoots this issue and prepares to resolve it using persistence. However, the following considerations apply in the environment:
  • It is a multi-proxy environment behind the NetScaler. 
  • USIP mode is enabled and applied to the services. 
  • The session timeout is very short. 
  • All users connect from the same location. 
The Administrator can use persistence based on the _____________setting to resolve this issue. (Choose the correct option to complete the sentence.) 
  1. HTTP Cookies
  2. Proximity
  3. SSL Session IDs
  4. Subnet IP
Correct answer: A
Question 791
A Citrix Administrator needs to ensure that a revoked certificate is NOT being used for client certificate authentication. 
Which two entities can the administrator select on the NetScaler? (Choose two.)
  1. Online Certification Status Protocol 
  2. Certificate Revocation List
  3. Subject Alternative certificates
  4. Server Name Indication
Correct answer: AB
Question 792
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down. 
What can the administrator perform to resolve this issue?
  1. Disable