Download Implementing Cisco Data Center Core Technologies (DCCOR).350-601.PracticeTest.2021-04-12.158q.vcex

Vendor: Cisco
Exam Code: 350-601
Exam Name: Implementing Cisco Data Center Core Technologies (DCCOR)
Date: Apr 12, 2021
File Size: 15 MB
Downloads: 1

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
Port security is enabled on a Cisco MDS 9000 series Switch. Which statement is true?
  1. Cisco Fabric Services must be disabled before enabling port security.
  2. Port security can be enabled only globally and affects all VSANs.
  3. Auto-learning is always enabled automatically when port security is enabled.
  4. Any devices currently logged in must be added manually to the device databased.
Correct answer: C
Question 2
In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two)
  1. frames that were sent with high credit
  2. frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender
  3. frames that were sent on the link but not yet received.
  4. frames that were sent on the link and received.
  5. frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender.
Correct answer: BC
Question 3
A small remote office is set to connect to the regional hub site via NSSA ASBR. Which type of LSA is sent to the remote office OSPF area?
  1. type 7 LSA
  2. type 3 LSA
  3. type 1 LSA
  4. type 5 LSA
Correct answer: A
Question 4
Refer to the exhibit. 
   
Which statement about the ERSPAN configuration in this environment is true.
  1. Host A is the source of ERSPAN spanned traffic and host B is the traffic analyzer.
  2. Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer.
  3. The session number of the source of ERSPAN spanned traffic must have a session ID of 48 for the traffic analyzer to receive the traffic.
  4. The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic.
Correct answer: A
Question 5
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the 
correct order on the right. 
Correct answer: To work with this question, an Exam Simulator is required.
Explanation:
install the virtualization feature set Enable the virtualization feature set Configure the port profile Configure support for VNTag mode on the interface that connects to the server. Configure the server to support NIV mode Configure the vNICs of the server
install the virtualization feature set 
Enable the virtualization feature set 
Configure the port profile 
Configure support for VNTag mode on the interface that connects to the server. 
Configure the server to support NIV mode 
Configure the vNICs of the server
Question 6
Refer to the exhibit. 
   
What is configured as a result of running these commands?
  1. reverse lookup for outbound packets
  2. strict unicast RPF
  3. loose unicast RPF
  4. IP Source Guard
Correct answer: B
Question 7
An engineer needs to Implement a solution that prevents loops from occurring accidentally by connecting a switch to interface Ethemet1/1. The port Is designated to be used tor host connectivity. 
What configuration should be implemented? 
   
  1. Option A
  2. Option B
  3. Option C
  4. Option D
Correct answer: C
Question 8
What happens to the default host firmware policy after a Cisco UCS Manager upgrade?
  1. It is updated to contain the firmware entries of all the components
  2. It is replaced by a new default policy without any firmware entries.
  3. It is assigned to all the service profiles that include a host firmware policy.
  4. It is set to match the host firmware policy.
Correct answer: B
Question 9
Refer to the exhibit. 
   
A network engineer is setting up a multihomed OTV network. The first site has been set up with a primary and secondary adjacency server. 
Which configuration must be added on the remote OTV AEDs site?
  1. interface Overlay200 
    otv join-interface Ethernet1/2 
    otv extend-vlan 178, 2500-2563 
    otv use-adjacency-server 20.1.1.1 unicast-only
  2. interface Overlay200 
    otv join-interface Ethernet1/2 
    otv extand-vlan 178, 2500-2563 
    otv adjacency-server unicast-only
  3. interface Overlay200 
    otv join-interface Ethernet1/2 
    otv extend-vlan 178, 2500-2563
  4. interface Overlay200 
    otv join-interface Ethernet1/2 
    otv extend-vlan 178, 2500-2563 
    otv use-adjacency-server 20.1.1.1 20.2.1.1 unicast-only
Correct answer: D
Question 10
What are two recommended design choices in a topology for multipathing iSCSI traffic? (Choose two.)
  1. two NICs bonded together on the initiator
  2. dual initiators to a single target with bonded interfaces
  3. initiators and targets in separate subnets
  4. dual initiators to dual targets
  5. single initiator to dual targets
Correct answer: BC
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!