Download Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR).350-401.Pass4Sure.2020-03-10.60q.vcex

Vendor: Cisco
Exam Code: 350-401
Exam Name: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Date: Mar 10, 2020
File Size: 2 MB
Downloads: 2

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
Refer to the exhibit. 
  
Which privilege level is assigned to VTY users?
  1. 1
  2. 7
  3. 13
  4. 15
Correct answer: A
Question 2
A client device fails to see the enterprise SSID, but other client devices are connected to it.  
What is the cause of this issue?
  1. The client has incorrect credentials stored for the configured broadcast SSID.
  2. The hidden SSID was not manually configured on the client.
  3. The broadcast SSID was not manually configured on the client.
  4. The client has incorrect credentials stored for the configured hidden SSID.
Correct answer: B
Question 3
Which OSPF network types are compatible and allow communication through the two peering devices?
  1. point-to-multipoint to nonbroadcast
  2. broadcast to nonbroadcast
  3. point-to-multipoint to broadcast
  4. broadcast to point-to-point
Correct answer: B
Explanation:
Reference: https://www.freeccnaworkbook.com/workbooks/ccna/configuring-ospf-network-types
Reference: https://www.freeccnaworkbook.com/workbooks/ccna/configuring-ospf-network-types
Question 4
Refer to the exhibit. 
  
Which statement about the OPSF debug output is true?
  1. The output displays OSPF hello messages which router R1 has sent or received on interface Fa0/1.
  2. The output displays OSPF messages which router R1 has sent or received on all interfaces.
  3. The output displays OSPF messages which router R1 has sent or received on interface Fa0/1.
  4. The output displays OSPF hello and LSACK messages which router R1 has sent or received.
Correct answer: A
Question 5
Which LISP infrastructure device provides connectivity between non-LISP sites and LISP sites by receiving non-LISP traffic with a LISP site destination?
  1. PITR
  2. map resolver
  3. map server
  4. PETR
Correct answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/5-0/LISPmobility/DCI_LISP_Host_Mobility/LISPmobile_2.html
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/5-0/LISPmobility/DCI_LISP_Host_Mobility/LISPmobile_2.html
Question 6
Which two protocols are used with YANG data models? (Choose two.)
  1. TLS
  2. RESTCONF
  3. SSH
  4. NETCONF
  5. HTTPS
Correct answer: BD
Question 7
The login method is configured on the VTY lines of a router with these parameters.  
  • The first method for authentication is TACACS  
  • If TACACS is unavailable, login is allowed without any provided credentials 
Which configuration accomplishes this task?
  1.   
  2.   
  3.   
  4.   
Correct answer: D
Question 8
Which statement about multicast RPs is true?
  1. RPs are required only when using protocol independent multicast dense mode.
  2. RPs are required for protocol independent multicast sparse mode and dense mode.
  3. By default, the RP is needed periodically to maintain sessions with sources and receivers.
  4. By default, the RP is needed only to start new sessions with sources and receivers.
Correct answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
Reference: https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
Question 9
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.  
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
  1. Active
  2. Passive
  3. On
  4. Auto
Correct answer: C
Explanation:
Reference: https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669
Reference: https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669
Question 10
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
  1. security group tag ACL assigned to each port on a switch
  2. security group tag number assigned to each user on a switch
  3. security group tag number assigned to each port on a network
  4. security group tag ACL assigned to each router on a network
Correct answer: B
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/solutions/collateral/borderless-networks/trustsec/C07-730151-00_overview_of_trustSec_og.pdf
Reference: https://www.cisco.com/c/dam/en/us/solutions/collateral/borderless-networks/trustsec/C07-730151-00_overview_of_trustSec_og.pdf
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!