Download Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR).350-401.NewDumps.2021-08-06.224q.vcex

Vendor: Cisco
Exam Code: 350-401
Exam Name: Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Date: Aug 06, 2021
File Size: 22 MB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
    
Refer to the exhibit. Which set of commands on router r R1 Allow deterministic translation of private hosts PC1, PC2, and PC3 to addresses in the public space? 
    
    
  1. Option A
  2. Option B
  3. Option C
  4. Option D  
Correct answer: A
Question 2
What is the calculation that is used to measure the radiated power of a signal after it has gone through the radio, antenna cable, and antenna?
  1. EIRP
  2. mW
  3. dBm
  4. dBi
Correct answer: A
Question 3
Refer to the exhibit. 
    
What step resolves the authentication issue?
  1. Use basic authentication
  2. Change the port to 12446
  3. Target 192.168.100.82 in the URI
  4. Restart the vsmart host
Correct answer: B
Question 4
What is the data policy in a Cisco SD-WAN deployment?
  1. list of ordered statements that define node configurations and authentication used within the SD-WAN overlay
  2. Set of statements that defines how data is forwarded based on IP packet information and specific VPNs
  3. detailed database mapping several kinds of addresses with their corresponding location
  4. group of services tested to guarantee devices and links liveliness within the SD-WAN overlay
Correct answer: B
Question 5
How is MSDP used to interconnect multiple PIM-SM domains?
  1. MSDP depends on BGP or multiprotocol BGP for interdomain operation.  
  2. MSDP SA request messages are used to request a list of active sources for a specific group
  3. MSDP allows a rendezvous point to dynamically discover active sources outside of its domain
  4. MSDP messages are used to advertise active sources in a domain
Correct answer: A
Question 6
Which line must be added in the Python function to return the JSON object {"cat_9k": “FXS193202SE")?
 
    
    
  1. Option A
  2. Option B
  3. Option C
  4. Option D
Correct answer: D
Question 7
Which controller is the single plane of management for Cisco SD-WAN?
  1. vBond
  2. vEdge
  3. vSmart
  4. vManage
Correct answer: D
Explanation:
The primary components for the Cisco SD-WAN solution consist of the vManage network management system (management plane), the vSmart controller (control plane), the vBond orchestrator (orchestration plane), and the vEdge router (data plane). vManage – This centralized network management system provides a GUI interface to easily monitor, configure, and maintain all Cisco SD-WAN devices and links in the underlay and overlay network. vSmart controller – This software-based component is responsible for the centralized control plane of the SD-WAN network. It establishes a secure connection to each vEdge router and distributes routes and policy information via the Overlay Management Protocol (OMP), acting as a  route reflector. It also orchestrates the secure data plane connectivity between the vEdge routers by distributing crypto key information, allowing for a very scalable, IKE-less architecture. vBond orchestrator – This software-based component performs the initial authentication of vEdge devices and orchestrates vSmart and vEdge connectivity. It also has an important role in enabling the communication of devices that sit behind Network Address Translation (NAT). vEdge router – This device, available as either a hardware appliance or software-based router, sits at a physical site or in the cloud and provides secure data plane connectivity among the sites over one or more WAN transports. It is responsible for traffic forwarding, security, encryption, Quality of Service (QoS), routing protocols such as Border Gateway Protocol (BGP) and Open Shortest Path First (OSPF), and more.
The primary components for the Cisco SD-WAN solution consist of the vManage network management system (management plane), the vSmart controller (control plane), the vBond orchestrator (orchestration plane), and the vEdge router (data plane). 
  • vManage – This centralized network management system provides a GUI interface to easily monitor, configure, and maintain all Cisco SD-WAN devices and links in the underlay and overlay network. 
  • vSmart controller – This software-based component is responsible for the centralized control plane of the SD-WAN network. It establishes a secure connection to each vEdge router and distributes routes and policy information via the Overlay Management Protocol (OMP), acting as a  route reflector. It also orchestrates the secure data plane connectivity between the vEdge routers by distributing crypto key information, allowing for a very scalable, IKE-less architecture. 
  • vBond orchestrator – This software-based component performs the initial authentication of vEdge devices and orchestrates vSmart and vEdge connectivity. It also has an important role in enabling the communication of devices that sit behind Network Address Translation (NAT). 
  • vEdge router – This device, available as either a hardware appliance or software-based router, sits at a physical site or in the cloud and provides secure data plane connectivity among the sites over one or more WAN transports. It is responsible for traffic forwarding, security, encryption, Quality of Service (QoS), routing protocols such as Border Gateway Protocol (BGP) and Open Shortest Path First (OSPF), and more.
Question 8
Which LISP component is required for a LISP site to communicate with a non-LISP site? 
  1. ETR
  2. ITR
  3. Proxy ETR
  4. Proxy ITR
Correct answer: C
Question 9
    
Refer to the exhibit. 
Which command set must be added to permit and log all traffic that comes from 172.20.10.1 in interface GigabitEthernet0/1 without impacting the functionality of the access list?  
    
  1. Option A
  2. Option B
  3. Option C
  4. Option D 
Correct answer: D
Question 10
An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. 
The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43. 
The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. 
The engineer has configured the DHCP scope on the switch as follows:
    
The access points are failing to join the wireless LAN controller. Which action resolves the issue?
  1. configure option 43 Hex F104.AC10.3205
  2. configure option 43 Hex F104.CA10.3205
  3. configure dns-server 172.16.50.5
  4. configure dns-server 172.16.100.1
Correct answer: B
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!