Download Certifications: CCNP Security, Cisco Certified Specialist - Network Security Firepower.300-710.PracticeTest.2021-04-12.66q.vcex

Vendor: Cisco
Exam Code: 300-710
Exam Name: Certifications: CCNP Security, Cisco Certified Specialist - Network Security Firepower
Date: Apr 12, 2021
File Size: 4 MB
Downloads: 3

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
Which CLI command is used to control special handling of ClientHello messages?
  1. system support ssl-client-hello-tuning
  2. system support ssl-client-hello-force-reset
  3. system support ssl-client-hello-display
  4. system support ssl-client-hello-reset
Correct answer: A
Question 2
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet. 
How is this accomplished on an FTD device in routed mode?
  1. by assigning an inline set interface
  2. by leveraging the ARP to direct traffic through the firewall
  3. by bypassing protocol inspection by leveraging pre-filter rules
  4. by using a BVl and create a BVl IP address in the same subnet as the user segment
Correct answer: D
Question 3
An engineer is implementing Cisco FTD in the network and is determining which Firepower mode to use the organization needs to have multiple virtual Firepower devices working separately inside the FTD application to provide traffic segmentation.   
Which deployment mode should be configured in the Cisco Firepower Management Console to support these requirements?
  1. single-context
  2. single deployment
  3. multiple deployment
  4. multi-instance
Correct answer: D
Question 4
An engineer is troubleshooting application failures through a FTD deployment While using the FMC CLI, it has been determined that the traffic in question is not matching the desired policy. What should be done to correct this?
  1. Use the system support firewall-engine-dump-user-identity-data command to change the policy and allow the application through the firewall
  2. Use the system support application-identification-debug command to determine which rules the traffic matching and modify the rule accordingly
  3. Use the system support network-options command to fine tune the policy
  4. Use the system support firewall-engine-debug command to determine which rules the traffic matching and modify the rule accordingly
Correct answer: D
Question 5
What is the benefit of selecting the trace option for packet capture?
  1. The option indicates whether the destination host responds through a different path
  2. The option limits the number of packets that are captured
  3. The option captures details of each packet
  4. The option indicates whether the packet was dropped or successful
Correct answer: B
Question 6
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation. During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass.   
Which default policy should be used?
  1. Security Over Connectivity
  2. Maximum Detection
  3. Balanced Security and Connectivity
  4. Connectivity Over Security
Correct answer: C
Question 7
Which two types of objects are reusable and supported by Cisco FMC? (Choose two)
  1. reputation-based objects, such as URL categories
  2. dynamic key mapping objects that help ink HTTP and HTTPS GET requests to Layer 7 application protocols
  3. reputation-based objects that represent Security Intelligence feeds and lists, application filers based on category and reputation, and file lists
  4. network-based objects that represent FODN mappings and networks, port/protocol pairs,VXLAN tags, security zones, and origin/destination country
  5. network-based objects that represent IP addresses and networks, port/protocol pairs,VLAN tags, security zones, and origin/destination country
Correct answer: CE
Question 8
An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of  10.10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network.   
What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?
  1. Delete and reregister the device to Cisco FMC
  2. Cisco FMC does not support devices that use 1Pv4 P addresses
  3. Update the IP addresses from Pv4 to IPv6 without deleting the device from Cisco FMC
  4. Format and reregister the device to Cisco FMC.
Correct answer: A
Question 9
An engineer is configuring a Cisco FTD appliance in IPS-only mode and needs to utilize fail-to-wire interfaces Which interface mode should be used to meet these requirements?
  1. inline set
  2. passive
  3. routed
  4. transparent
Correct answer: A
Question 10
An organization has noticed that malware was downloaded from a website that does not currently have a known bad reputation  
How will this issue be addressed globally in the quickest way possible and with the least amount of impact?
  1. by denying outbound web access
  2. by creating a URL object in the policy to block the website
  3. by isolating the endpoint
  4. Cisco Talos will automatically update the polices.
Correct answer: D
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!