Download Implementing Cisco Application Centric Infrastructure (DCACI).300-620.ExamBible.2024-07-10.50q.vcex

Vendor: Cisco
Exam Code: 300-620
Exam Name: Implementing Cisco Application Centric Infrastructure (DCACI)
Date: Jul 10, 2024
File Size: 1 MB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
What must be configured to allow SNMP traffic on the APIC controller?
  1. out-of-band management interface
  2. contract under tenant mgmt
  3. SNMP relay policy
  4. out-of-band bridge domain
Correct answer: B
Question 2
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion terms on the left to the correct descriptions on the right. 
Correct answer: To work with this question, an Exam Simulator is required.
Explanation:
 
 
Question 3
In the context of ACI Multi-Site, when is the information of an endpoint (MAC/IP) that belongs to site 1 advertised to site 2 using the EVPN control plane?
  1. Endpoint information is not exchanged across sites unless COOP protocol is used.
  2. Endpoint information is not exchanged across sites unless a policy is configured to allow communication across sites.
  3. Endpoint information is exchanged across sites as soon as the endpoint is discovered in one site.
  4. Endpoint information is exchanged across sites when the endpoints are discovered in both sites.
Correct answer: A
Explanation:
Reference:  https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739609.html#CiscoACIMultiSiteoverlaydataplane
Reference:  
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739609.html#CiscoACIMultiSiteoverlaydataplane
Question 4
When creating a subnet within a bridge domain, which configuration option is used to specify the network visibility of the subnet?
  1. limit IP learning to subnet
  2. scope
  3. gateway IP
  4. subnet control
Correct answer: C
Explanation:
Reference:  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_0111.html
Reference:  
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_0111.html
Question 5
What must be enabled in the bridge domain to have the endpoint table learn the IP addresses of endpoints?
  1. L2 unknown unicast: flood
  2. GARP based detection
  3. unicast routing
  4. subnet scope
Correct answer: C
Explanation:
Reference:  https://hsvglobalschool.in/dhkycw/cisco-aci-bridge-domain.html
Reference:  
https://hsvglobalschool.in/dhkycw/cisco-aci-bridge-domain.html
Question 6
What must be configured to redistribute externally learned OSPF routes within the ACI fabric?
  1. Route Control Profile
  2. BGP Route Reflector
  3. BGP Inter-leak Route Map
  4. PIM Sparse Mode
Correct answer: B
Explanation:
Reference:  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010010.html
Reference:  
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010010.html
Question 7
What does a bridge domain represent?
  1. Layer 3 cloud
  2. Layer 2 forwarding construct
  3. tenant
  4. physical domain
Correct answer: B
Explanation:
Reference:  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/b_Cisco_APIC_Layer_2_Configuration_Guide/b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_010.html
Reference:  
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/b_Cisco_APIC_Layer_2_Configuration_Guide/b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_010.html
Question 8
What are two requirements for the IPN network when implementing a Multi-Pod ACI fabric? (Choose two.)
  1. EIGRP routing
  2. PIM ASM multicast routing
  3. BGP routing
  4. VLAN ID 4
  5. OSPF routing
Correct answer: AE
Question 9
Regarding the MTU value of MP-BGP EVPN control plane packets in Cisco ACI, which statement about communication between spine nodes in different sites is true?
  1. By default, spine nodes generate 9000-bytes packets to exchange endpoints routing informatio
  2. As a result, the Inter-Site network should be able to carry 9000-bytes packets.
  3. By default, spine nodes generate 1500-bytes packets to exchange endpoints routing informatio
  4. As a result, the Inter-Site network should be able to carry 1800-bytes packets.
  5. By default, spine nodes generate 1500-bytes packets to exchange endpoints routing informatio
  6. As a result, the Inter-Site network should be able to carry 1500-bytes packets.
  7. By default, spine nodes generate 9000-bytes packets to exchange endpoints routing informatio
  8. As a result, the Inter-Site network should be able to carry 9100-bytes packets.
Correct answer: D
Question 10
Refer to the exhibit.
  
Which two objects are created as a result of the configuration? (Choose two.)
  1. application profile
  2. attachable AEP
  3. bridge domain
  4. endpoint group
  5. VRF
Correct answer: CE
Explanation:
Reference:  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01110.html
Reference:  
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01110.html
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!