Download Designing Cisco Data Center Infrastructure (DCID).300-610.Train4Sure.2020-04-07.36q.vcex

Vendor: Cisco
Exam Code: 300-610
Exam Name: Designing Cisco Data Center Infrastructure (DCID)
Date: Apr 07, 2020
File Size: 524 KB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
  1. Embedded RP
  2. Phantom RP
  3. MSDP
  4. PIM anycast RP
Correct answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html
Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html
Question 2
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
  1. IP redirects
  2. flow control
  3. proxy ARP
  4. HSRP
Correct answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX-OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX-OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
Question 3
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
  1. supports Layer 3 port channels
  2. disables spanning-tree
  3. no spanning-tree blocked ports
  4. uses all available uplink bandwidth
  5. maintains single control plane
Correct answer: CD
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
Question 4
What is a design consideration when implementing FSPF?
  1. Routes are based on the domain ID.
  2. Routes are based on the distance vector protocol.
  3. FSPF runs only on F Ports.
  4. FSPF runs on a per-chassis basis.
Correct answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/fabric/nxos/cli_fabric/fspf.html
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/fabric/nxos/cli_fabric/fspf.html
Question 5
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
  1. All the VDC have the same out-of-band IP address.
  2. Each VDC has a dedicated out-of-band Ethernet management port.
  3. Each VDC has a unique out-of-band IP address from the same IP subnet.
  4. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
Correct answer: C
Question 6
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
  1. Connect the VDCs to an external Layer 3 device.
  2. Cross-connect the ports between the VDCs.
  3. Create VRF-aware software infrastructure interfaces.
  4. Create a policy map in the default VDC that routes traffic between the VDCs.
  5. Create interfaces in the VDC that can be accessed by another VDC.
Correct answer: AD
Question 7
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
  1. BFD
  2. UDLD
  3. MCP
  4. LLDP
Correct answer: B
Question 8
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
  1. Layer 3 interfaces can belong to multiple VRFs.
  2. VRF-Lite interfaces can be Layer 2.
  3. Overlapping IP addresses are permitted on different VRFs.
  4. Interfaces that belong to VRFs can be physical or logical.
  5. VRF-Lite interfaces support MPLS.
Correct answer: CD
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/cgr1000/ios/software/15_4_1_cg/vrf_cgr1000.html
Reference: https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/cgr1000/ios/software/15_4_1_cg/vrf_cgr1000.html
Question 9
Refer to the exhibit. 
  
What must be the default gateway of the servers in EPG Web?
  1. subnet address of BD1
  2. subnet address of L3Out
  3. subnet address of BD2
  4. NAT appliance
Correct answer: D
Question 10
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
  1. VPC+
  2. UDLD
  3. EVPN
  4. OSPF
Correct answer: C
Question 11
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
  1. Embedded RP
  2. Phantom RP
  3. MSDP
  4. PIM anycast RP
Correct answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html
Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html
Question 12
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
  1. IP redirects
  2. flow control
  3. proxy ARP
  4. HSRP
Correct answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX-OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX-OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
Question 13
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
  1. supports Layer 3 port channels
  2. disables spanning-tree
  3. no spanning-tree blocked ports
  4. uses all available uplink bandwidth
  5. maintains single control plane
Correct answer: CD
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
Question 14
What is a design consideration when implementing FSPF?
  1. Routes are based on the domain ID.
  2. Routes are based on the distance vector protocol.
  3. FSPF runs only on F Ports.
  4. FSPF runs on a per-chassis basis.
Correct answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/fabric/nxos/cli_fabric/fspf.html
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/fabric/nxos/cli_fabric/fspf.html
Question 15
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
  1. All the VDC have the same out-of-band IP address.
  2. Each VDC has a dedicated out-of-band Ethernet management port.
  3. Each VDC has a unique out-of-band IP address from the same IP subnet.
  4. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
Correct answer: C
Question 16
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
  1. Connect the VDCs to an external Layer 3 device.
  2. Cross-connect the ports between the VDCs.
  3. Create VRF-aware software infrastructure interfaces.
  4. Create a policy map in the default VDC that routes traffic between the VDCs.
  5. Create interfaces in the VDC that can be accessed by another VDC.
Correct answer: AD
Question 17
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
  1. BFD
  2. UDLD
  3. MCP
  4. LLDP
Correct answer: B
Question 18
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
  1. Layer 3 interfaces can belong to multiple VRFs.
  2. VRF-Lite interfaces can be Layer 2.
  3. Overlapping IP addresses are permitted on different VRFs.
  4. Interfaces that belong to VRFs can be physical or logical.
  5. VRF-Lite interfaces support MPLS.
Correct answer: CD
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/cgr1000/ios/software/15_4_1_cg/vrf_cgr1000.html
Reference: https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/cgr1000/ios/software/15_4_1_cg/vrf_cgr1000.html
Question 19
Refer to the exhibit. 
  
What must be the default gateway of the servers in EPG Web?
  1. subnet address of BD1
  2. subnet address of L3Out
  3. subnet address of BD2
  4. NAT appliance
Correct answer: D
Question 20
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
  1. VPC+
  2. UDLD
  3. EVPN
  4. OSPF
Correct answer: C
Question 21
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
  1. Embedded RP
  2. Phantom RP
  3. MSDP
  4. PIM anycast RP
Correct answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html
Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html
Question 22
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
  1. IP redirects
  2. flow control
  3. proxy ARP
  4. HSRP
Correct answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX-OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX-OS_LISP_Configuration_Guide/b_NX-OS_LISP_Configuration_Guide_chapter_010.html
Question 23
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
  1. supports Layer 3 port channels
  2. disables spanning-tree
  3. no spanning-tree blocked ports
  4. uses all available uplink bandwidth
  5. maintains single control plane
Correct answer: CD
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
Reference: https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf
Question 24
What is a design consideration when implementing FSPF?
  1. Routes are based on the domain ID.
  2. Routes are based on the distance vector protocol.
  3. FSPF runs only on F Ports.
  4. FSPF runs on a per-chassis basis.
Correct answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/fabric/nxos/cli_fabric/fspf.html
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/fabric/nxos/cli_fabric/fspf.html
Question 25
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
  1. All the VDC have the same out-of-band IP address.
  2. Each VDC has a dedicated out-of-band Ethernet management port.
  3. Each VDC has a unique out-of-band IP address from the same IP subnet.
  4. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
Correct answer: C
Question 26
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
  1. Connect the VDCs to an external Layer 3 device.
  2. Cross-connect the ports between the VDCs.
  3. Create VRF-aware software infrastructure interfaces.
  4. Create a policy map in the default VDC that routes traffic between the VDCs.
  5. Create interfaces in the VDC that can be accessed by another VDC.
Correct answer: AD
Question 27
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
  1. BFD
  2. UDLD
  3. MCP
  4. LLDP
Correct answer: B
Question 28
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
  1. Layer 3 interfaces can belong to multiple VRFs.
  2. VRF-Lite interfaces can be Layer 2.
  3. Overlapping IP addresses are permitted on different VRFs.
  4. Interfaces that belong to VRFs can be physical or logical.
  5. VRF-Lite interfaces support MPLS.
Correct answer: CD
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/cgr1000/ios/software/15_4_1_cg/vrf_cgr1000.html
Reference: https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/cgr1000/ios/software/15_4_1_cg/vrf_cgr1000.html
Question 29
Refer to the exhibit. 
  
What must be the default gateway of the servers in EPG Web?
  1. subnet address of BD1
  2. subnet address of L3Out
  3. subnet address of BD2
  4. NAT appliance
Correct answer: D
Question 30
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
  1. VPC+
  2. UDLD
  3. EVPN
  4. OSPF
Correct answer: C
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!