Download Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI).PremiumDumps.300-410.2023-11-09.1e.296q.vcex
Download Exam
File Info
| Exam | Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) |
| Number | 300-410 |
| File Name | Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI).PremiumDumps.300-410.2023-11-09.1e.296q.vcex |
| Size | 18.41 Mb |
| Posted | November 09, 2023 |
| Downloads | 18 |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: EXAMFILESCOM
With discount: 20%
Demo Questions
Question 1
Refer to the exhibit.
An engineer noticed that the router log messages do not have any information about when the event occurred. Which action should the engineer take when enabling service time stamps to improve the logging functionality at a granular level?
An engineer noticed that the router log messages do not have any information about when the event occurred. Which action should the engineer take when enabling service time stamps to improve the logging functionality at a granular level?
- A: Configure the debug uptime option
- B: Configure the msec option
- C: Configure the timezone option
- D: Configure the log uptime option
Question 2
The IPv6 network is under attack by an unknown source that is neither in the binding table nor learned through neighbor discovery. Which feature helps prevent the attack?
- A: IPv6 Destination Guard
- B: IPv6 Prefix Guard
- C: IPv6 Router Advertisement Guard
- D: IPv6 Snooping
Question 3
Refer to the exhibit.
An engineer configures two ASBRs, 10.4.17.6 and 10.4.15.5, in an OSPF network to redistribute routes from EIGRP. However, both ASBRs show the EIGRP routes as equal costs even though the next-hop router 10.4.17.6 is closer to R1. How should the network traffic to the EIGRP prefixes be sent via 10.4.17.6?
An engineer configures two ASBRs, 10.4.17.6 and 10.4.15.5, in an OSPF network to redistribute routes from EIGRP. However, both ASBRs show the EIGRP routes as equal costs even though the next-hop router 10.4.17.6 is closer to R1. How should the network traffic to the EIGRP prefixes be sent via 10.4.17.6?
- A: The administrative distance should be raised to 120 from the ASBR 10.4.15.5.
- B: The ASBR 104.176 should assign a tag to match and assign a lower metric on R1.
- C: The administrative distance should be raised to 120 from the ASBR 104.17.6
- D: The redistributed prefixes should be advertised as Type 1
Question 4
Refer to the exhibit.
A network administrator is troubleshooting OSPF adjacency issue by going through the console logs in the router, but due to an overwhelming log messages stream, it is impossible to capture the problem. Which two commands reduce console log messages to relevant OSPF neighbor problem details so that the issue can be resolved? (Choose two)
A network administrator is troubleshooting OSPF adjacency issue by going through the console logs in the router, but due to an overwhelming log messages stream, it is impossible to capture the problem. Which two commands reduce console log messages to relevant OSPF neighbor problem details so that the issue can be resolved? (Choose two)
- A: debug condition all
- B: debug condition ip
- C: debug condition session-id ADJCHG
- D: debug condition ospf neighbor
- E: debug condition interface
Question 5
Refer to the exhibit.
Bangkok is using ECMP to reach the 172.20.2.0/24 network. The network administrator must configure it in such a way that traffic from 172.16.2.0/24 network uses the Singapore router as the preferred route. Which set of configurations accomplishes this task?
Bangkok is using ECMP to reach the 172.20.2.0/24 network. The network administrator must configure it in such a way that traffic from 172.16.2.0/24 network uses the Singapore router as the preferred route. Which set of configurations accomplishes this task?
- A: Bangkok
access-list 101 permit ip 172.16.2.0 0.0.0.255 172.20.2.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.19.1.2
!
interface Ethernet0/2
ip policy route-map PBR1 - B: Dubai
access-list 101 permit ip 172.16.2.0 0.0.0.255 172.20.2.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.19.1.2
!
interface Ethernet0/0
ip policy route-map PBR1 - C: Bangkok
access-list 101 permit ip 172.16.2.0 0.0.0.255 172.20.2.0 0.0.0.265
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.19.1.2
!
interface Ethernet0/1
ip policy route-map PBR1 - D: Dubai
access-list 101 permit ip 172.16.2.0 0.0.0.255 172.20.2.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.19.1.2
set ip next-hop peer-address
!
interface Ethernet0/1
ip policy route-map PBR1
Question 6
Which failure detection mechanism is used for BFD?
- A: routing protocol failure
- B: Layer 2 protocol failure
- C: variable rate
- D: consistent rate
Question 7
Refer to the exhibit.
A network engineer is troubleshooting a failed link between R2 and R3. No traffic loss is reported from router R5 to HQ. Which command fixes the separated backbone?
A network engineer is troubleshooting a failed link between R2 and R3. No traffic loss is reported from router R5 to HQ. Which command fixes the separated backbone?
- A: R2(config-router)#area 21 virtual-link 192.168.125.5
- B: R3(config-router)#no area 21 stub
- C: R3(config-router)#area 21 virtual-link 192.168.125.5
- D: R2(config-router)#no area 21 stub
Question 8
How is a preshared key “Test” for all the remote VPN routers configured in a DMVPN using GRE over IPsec set up?
- A: authentication pre-share Test address 0.0.0.0 0.0.0.0
- B: set pre-share Test address 0.0.0.0 0.0.0.0
- C: crypto ipsec key Test address 0.0.0.0 0.0.0.0
- D: crypto isakmp key Test address 0.0.0.0 0.0.0.0
Question 9
Network operations report issues with receiving too many external routes, which caused CPU spoke on routers with smaller memories. Which action resolves the issue?
- A: Configure the area range command when redistributing on ASBR
- B: Configure the area range command when redistributing on ABR
- C: Configure the summary-address command when redistributing on ABR
- D: Configure the summary-address command when redistributing on ASBR
Question 10
Refer to the exhibit.
Switch(config)# ip vrf 70
Switch(config-vrf)# rd 70:1
Switch(config-vrf)# route-target export 70:1
Switch(config-vrf)# route-target import 70:1
Switch(config-vrf)# exit
Switch(config)# ip vrf 80
Switch(config-vrf)# rd 80:1
Switch(config-vrf)# route-target export 80:1
Switch(config-vrf)# route-target import 80:1
An engineer must extend VRF-Lite over a trunk to another switch for VLAN 70 (10.70.70.0/24) on port GigabitEthernet0/0 and VLAN 80 (10.80.80.0/24) on port GigabitEthernet0/1. Which configuration accomplishes this objective?
Switch(config)# ip vrf 70
Switch(config-vrf)# rd 70:1
Switch(config-vrf)# route-target export 70:1
Switch(config-vrf)# route-target import 70:1
Switch(config-vrf)# exit
Switch(config)# ip vrf 80
Switch(config-vrf)# rd 80:1
Switch(config-vrf)# route-target export 80:1
Switch(config-vrf)# route-target import 80:1
An engineer must extend VRF-Lite over a trunk to another switch for VLAN 70 (10.70.70.0/24) on port GigabitEthernet0/0 and VLAN 80 (10.80.80.0/24) on port GigabitEthernet0/1. Which configuration accomplishes this objective?
- A: interface GigabitEthernet0/0
switchport mode access
switchport access vlan 70
!
interface GigabitEthernet0/1
switchport mode access
switchport access vlan 80 - B: interface GigabitEthernet0/0
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk allowed vlan 70
!
interface GigabitEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
switchport trunk allowed vlan 80 - C: interface GigabitEthernet0/0
switchport mode access
switchport access vlan 70
ip vrf forwarding 70
!
interface GigabitEthernet0/1
switchport mode access
switchport access vlan 80
ip vrf forwarding 80
! - D: interface GigabitEthernet0/0
no switchport
ip vrf forwarding 70
ip address 10.70.70.1 255.255.255.0
!
interface GigabitEthernet0/1
no switchport
ip vrf forwarding 80
ip address 10.80.80.1 255.255.255.0
HOW TO OPEN VCEX AND EXAM FILES
Use ProfExam Simulator to open VCEX and EXAM files
HOW TO OPEN VCE FILES
Use VCE Exam Simulator to open VCE files
