Download Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI).300-410.Marks4Sure.2021-04-14.124q.vcex

Vendor: Cisco
Exam Code: 300-410
Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)
Date: Apr 14, 2021
File Size: 14 MB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Demo Questions

Question 1
Refer to the exhibit.  
      
Which control plane policy limits BGP traffic that is destined to the CPU to 1 Mbps and ignores BGP traffic that is sent at higher rate?
  1. policy-map SHAPE_BGP
  2. policy-map LIMIT_BGP
  3. policy-map POLICE_BGP
  4. policy-map COPP
Correct answer: D
Question 2
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap. 
Which command allows the logging on the switch to show the time of the flap according to the clock on the device?
  1. service timestamps log uptime
  2. clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00
  3. service timestamps log datetime localtime show-timezone
  4. clock calendar-valid
Correct answer: C
Explanation:
By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up
By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up
Question 3
Which is statement about IPv6 inspection is true?
  1. It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables
  2. It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables
  3. It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables  
  4. It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.
Correct answer: D
Question 4
Refer to the exhibit.  
      
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
  1. Issue the eigrp stub command on R1.
  2. Issue the no eigrp stub command on R1
  3. Issue the eigrp stub command on R2.
  4. Issue the no eigrp stub command on R2.
Correct answer: B
Question 5
Refer to the exhibit. 
      
An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen. What is the reason for this?  
  1. Dynamic routing protocols always have priority over static routes.
  2. The metric of the OSPF route is lower than the metric of the static route.
  3. The configured AD for the static route is higher than the AD of OSPF.
  4. The syntax of the static route is not valid, so the route is not considered.
Correct answer: C
Explanation:
The AD of static route is manually configured to 130 which is higher than the AD of OSPF router which is 110.
The AD of static route is manually configured to 130 which is higher than the AD of OSPF router which is 110.
Question 6
Refer to the exhibit. 
      
During troubleshooting it was discovered that the device is not reachable using a secure web browser. What is needed to fix the problem?
  1. permit tcp port 443
  2. permit udp port 465
  3. permit tcp port 465
  4. permit tcp port 22
Correct answer: A
Question 7
Drag and drop the DHCP messages from the left onto the correct uses on the right.  
 
Correct answer: To work with this question, an Exam Simulator is required.
Explanation:
DHCPACK The server-to-client communication with configuration parameters, including committed network address. DHCPINFORM The client-to-server communication, asking for only local configuration parameters that the client already has externally configured as an address. DHCPNAK The server-to-client communication, refusing the request for configuration parameter. DHCPDECLINE The client-to-server communication, indicating that the network address is already in use 
DHCPACK 
The server-to-client communication with configuration parameters, including committed network address. 
DHCPINFORM 
The client-to-server communication, asking for only local configuration parameters that the client already has externally configured as an address. 
DHCPNAK 
The server-to-client communication, refusing the request for configuration parameter. 
DHCPDECLINE 
The client-to-server communication, indicating that the network address is already in use 
Question 8
Which IGPs are supported by the MPLS LDP autoconfiguration feature?
  1. RIPv2 and OSPF
  2. OSPF and EIGRP
  3. OSPF and ISIS
  4. ISIS and RIPv2
Correct answer: C
Question 9
Refer to the exhibit.  
      
What does the imp-null tag represent in the MPLS VPN cloud?
  1. Pop the label
  2. Impose the label
  3. Include the EXP bit
  4. Exclude the EXP bit
Correct answer: A
Explanation:
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet. Note: pop means remove the top MPLS label
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet. 
Note: pop means remove the top MPLS label
Question 10
When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”. 
What is the reason for the error?
  1. The template has an incorrect configuration.
  2. The software version of the template is different from the software version of the device.
  3. The changes to the template were not committed.
  4. The tag that was used to filter the templates does not match the device tag.
Correct answer: D
Explanation:
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not compatible with template.
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not compatible with template.
Question 11
Refer to the exhibit.  
      
Which control plane policy limits BGP traffic that is destined to the CPU to 1 Mbps and ignores BGP traffic that is sent at higher rate?
  1. policy-map SHAPE_BGP
  2. policy-map LIMIT_BGP
  3. policy-map POLICE_BGP
  4. policy-map COPP
Correct answer: D
Question 12
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap. 
Which command allows the logging on the switch to show the time of the flap according to the clock on the device?
  1. service timestamps log uptime
  2. clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00
  3. service timestamps log datetime localtime show-timezone
  4. clock calendar-valid
Correct answer: C
Explanation:
By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up
By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up
Question 13
Which is statement about IPv6 inspection is true?
  1. It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables
  2. It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables
  3. It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables  
  4. It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.
Correct answer: D
Question 14
Refer to the exhibit.  
      
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
  1. Issue the eigrp stub command on R1.
  2. Issue the no eigrp stub command on R1
  3. Issue the eigrp stub command on R2.
  4. Issue the no eigrp stub command on R2.
Correct answer: B
Question 15
Refer to the exhibit. 
      
An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen. What is the reason for this?  
  1. Dynamic routing protocols always have priority over static routes.
  2. The metric of the OSPF route is lower than the metric of the static route.
  3. The configured AD for the static route is higher than the AD of OSPF.
  4. The syntax of the static route is not valid, so the route is not considered.
Correct answer: C
Explanation:
The AD of static route is manually configured to 130 which is higher than the AD of OSPF router which is 110.
The AD of static route is manually configured to 130 which is higher than the AD of OSPF router which is 110.
Question 16
Refer to the exhibit. 
      
During troubleshooting it was discovered that the device is not reachable using a secure web browser. What is needed to fix the problem?
  1. permit tcp port 443
  2. permit udp port 465
  3. permit tcp port 465
  4. permit tcp port 22
Correct answer: A
Question 17
Drag and drop the DHCP messages from the left onto the correct uses on the right.  
 
Correct answer: To work with this question, an Exam Simulator is required.
Explanation:
DHCPACK The server-to-client communication with configuration parameters, including committed network address. DHCPINFORM The client-to-server communication, asking for only local configuration parameters that the client already has externally configured as an address. DHCPNAK The server-to-client communication, refusing the request for configuration parameter. DHCPDECLINE The client-to-server communication, indicating that the network address is already in use 
DHCPACK 
The server-to-client communication with configuration parameters, including committed network address. 
DHCPINFORM 
The client-to-server communication, asking for only local configuration parameters that the client already has externally configured as an address. 
DHCPNAK 
The server-to-client communication, refusing the request for configuration parameter. 
DHCPDECLINE 
The client-to-server communication, indicating that the network address is already in use 
Question 18
Which IGPs are supported by the MPLS LDP autoconfiguration feature?
  1. RIPv2 and OSPF
  2. OSPF and EIGRP
  3. OSPF and ISIS
  4. ISIS and RIPv2
Correct answer: C
Question 19
Refer to the exhibit.  
      
What does the imp-null tag represent in the MPLS VPN cloud?
  1. Pop the label
  2. Impose the label
  3. Include the EXP bit
  4. Exclude the EXP bit
Correct answer: A
Explanation:
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet. Note: pop means remove the top MPLS label
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet. 
Note: pop means remove the top MPLS label
Question 20
When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”. 
What is the reason for the error?
  1. The template has an incorrect configuration.
  2. The software version of the template is different from the software version of the device.
  3. The changes to the template were not committed.
  4. The tag that was used to filter the templates does not match the device tag.
Correct answer: D
Explanation:
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not compatible with template.
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not compatible with template.
Question 21
Refer to the exhibit.  
      
Which control plane policy limits BGP traffic that is destined to the CPU to 1 Mbps and ignores BGP traffic that is sent at higher rate?
  1. policy-map SHAPE_BGP
  2. policy-map LIMIT_BGP
  3. policy-map POLICE_BGP
  4. policy-map COPP
Correct answer: D
Question 22
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap. 
Which command allows the logging on the switch to show the time of the flap according to the clock on the device?
  1. service timestamps log uptime
  2. clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00
  3. service timestamps log datetime localtime show-timezone
  4. clock calendar-valid
Correct answer: C
Explanation:
By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up
By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up
Question 23
Which is statement about IPv6 inspection is true?
  1. It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables
  2. It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables
  3. It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables  
  4. It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.
Correct answer: D
Question 24
Refer to the exhibit.  
      
Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?
  1. Issue the eigrp stub command on R1.
  2. Issue the no eigrp stub command on R1
  3. Issue the eigrp stub command on R2.
  4. Issue the no eigrp stub command on R2.
Correct answer: B
Question 25
Refer to the exhibit. 
      
An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen. What is the reason for this?  
  1. Dynamic routing protocols always have priority over static routes.
  2. The metric of the OSPF route is lower than the metric of the static route.
  3. The configured AD for the static route is higher than the AD of OSPF.
  4. The syntax of the static route is not valid, so the route is not considered.
Correct answer: C
Explanation:
The AD of static route is manually configured to 130 which is higher than the AD of OSPF router which is 110.
The AD of static route is manually configured to 130 which is higher than the AD of OSPF router which is 110.
Question 26
Refer to the exhibit. 
      
During troubleshooting it was discovered that the device is not reachable using a secure web browser. What is needed to fix the problem?
  1. permit tcp port 443
  2. permit udp port 465
  3. permit tcp port 465
  4. permit tcp port 22
Correct answer: A
Question 27
Drag and drop the DHCP messages from the left onto the correct uses on the right.  
 
Correct answer: To work with this question, an Exam Simulator is required.
Explanation:
DHCPACK The server-to-client communication with configuration parameters, including committed network address. DHCPINFORM The client-to-server communication, asking for only local configuration parameters that the client already has externally configured as an address. DHCPNAK The server-to-client communication, refusing the request for configuration parameter. DHCPDECLINE The client-to-server communication, indicating that the network address is already in use 
DHCPACK 
The server-to-client communication with configuration parameters, including committed network address. 
DHCPINFORM 
The client-to-server communication, asking for only local configuration parameters that the client already has externally configured as an address. 
DHCPNAK 
The server-to-client communication, refusing the request for configuration parameter. 
DHCPDECLINE 
The client-to-server communication, indicating that the network address is already in use 
Question 28
Which IGPs are supported by the MPLS LDP autoconfiguration feature?
  1. RIPv2 and OSPF
  2. OSPF and EIGRP
  3. OSPF and ISIS
  4. ISIS and RIPv2
Correct answer: C
Question 29
Refer to the exhibit.  
      
What does the imp-null tag represent in the MPLS VPN cloud?
  1. Pop the label
  2. Impose the label
  3. Include the EXP bit
  4. Exclude the EXP bit
Correct answer: A
Explanation:
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet. Note: pop means remove the top MPLS label
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet. 
Note: pop means remove the top MPLS label
Question 30
When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”. 
What is the reason for the error?
  1. The template has an incorrect configuration.
  2. The software version of the template is different from the software version of the device.
  3. The changes to the template were not committed.
  4. The tag that was used to filter the templates does not match the device tag.
Correct answer: D
Explanation:
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not compatible with template.
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not compatible with template.
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!