Download Interconnecting Cisco Networking Devices Part 2 (ICND2 v3-0).lead2pass.200-105.2018-09-26.1e.313q.vcex

Download Dump

File Info

Exam Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)
Number 200-105
File Name Interconnecting Cisco Networking Devices Part 2 (ICND2 v3-0).lead2pass.200-105.2018-09-26.1e.313q.vcex
Size 17.68 Mb
Posted September 26, 2018
Downloaded 11



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
Scenario 
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. 
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices. 
Use appropriate show commands to troubleshoot the issues and answer all four questions. 
Instructions 
Enter Cisco IOS commands on the device to verify network operation and answer the multiple-choice questions. 
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION. 
Click on the device to gain access to the console of the device. No console or enable passwords are required. 
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. 
There are four multiple-choice questions with this task. Be sure to answer all four questions before clicking the Next button. 
  

  

  

  

  

  

  

An OSPF neighbor adjacency is not formed between R3 in the main office and R6 in the Branch3 office. What is causing the problem?

  • A: There is an area ID mismatch.
  • B: There is a PPP authentication issue; the username is not configured on R3 and R6.
  • C: There is an OSPF hello and dead interval mismatch.
  • D: The R3 router ID is configured on R6.



Question 2
Scenario 
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. 
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices. 
Use appropriate show commands to troubleshoot the issues and answer all four questions. 
Instructions 
Enter Cisco IOS commands on the device to verify network operation and answer the multiple-choice questions. 
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION. 
Click on the device to gain access to the console of the device. No console or enable passwords are required. 
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. 
There are four multiple-choice questions with this task. Be sure to answer all four questions before clicking the Next button. 
  

  

  

  

  

  

  

R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?

  • A: R1 ethernet0/1 is shutdown. Configure the no shutdown command.
  • B: R1 ethernet0/l configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25.
  • C: R2 ethernet0/1 and R3 ethernet0/0 are configured with a non-default OSPF hello interval of 25; configure no ip ospf hello-interval 25.
  • D: Enable OSPF for R1 ethernet0/l; configure ip ospf 1 area 0 command under ethernet0/1.



Question 3
Scenario 
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. 
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices. 
Use appropriate show commands to troubleshoot the issues and answer all four questions. 
Instructions 
Enter Cisco IOS commands on the device to verify network operation and answer the multiple-choice questions. 
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION. 
Click on the device to gain access to the console of the device. No console or enable passwords are required. 
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. 
There are four multiple-choice questions with this task. Be sure to answer all four questions before clicking the Next button. 

  

  

  

  

  

  

  

An OSPF neighbor adjacency is not formed between R3 in the main office and R5 in the Branch2 office. What is causing the problem?

  • A: There is an area ID mismatch.
  • B: There is a PPP authentication issue; a password mismatch.
  • C: There is an OSPF hello and dead interval mismatch.
  • D: There is a missing network command in the OSPF process on R5.



Question 4
What is the advantage of using a multipoint interface instead of point-to-point subinterfaces when configuring a Frame Relay hub in a hub-and-spoke topology?

  • A: It avoids split-horizon issues with distance vector routing protocols.
  • B: IP addresses can be conserved if VLSM is not being used for subnetting.
  • C: A multipoint interface offers greater security compared to point-to-point subinterface configurations.
  • D: The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations.



Question 5
Which two statistics appear in show frame-relay map output? (Choose two.)

  • A: the number of BECN packets that are received by the router
  • B: the value of the local DLCI
  • C: the number of FECN packets that are received by the router
  • D: the status of the PVC that is configured on the router
  • E: the IP address of the local router



Question 6
Which protocol is an open standard protocol framework that is commonly used in VPNs, to provide secure end-to-end communications?

  • A: RSA
  • B: L2TP
  • C: IPsec
  • D: PPTP



Question 7
At which layer of the OSI model does PPP perform?

  • A: Layer 2
  • B: Layer 3
  • C: Layer 4
  • D: Layer 5



Question 8
The command show frame-relay map gives the following output:
Serial 0 (up): ip 192.168.151.4 dlci 122, dynamic, b
roadcast, status defined, active 
Which statements represent what is shown? (Choose three.)

  • A: 192.168.151.4 represents the IP address of the remote router
  • B: 192.168.151.4 represents the IP address of the local serial interface
  • C: DLCI 122 represents the interface of the remote serial interface
  • D: DLCI 122 represents the local number used to connect to the remote address
  • E: broadcast indicates that a dynamic routing protocol such as RIP v1 can send packets across this PVC
  • F: active indicates that the ARP process is working



Question 9
What can be done to Frame Relay to resolve split-horizon issues? (Choose two.)

  • A: Disable Inverse ARP.
  • B: Create a full-mesh topology.
  • C: Develop multipoint subinterfaces.
  • D: Configure point-to-point subinterfaces.
  • E: Remove the broadcast keyword from the frame-relay map command.



Question 10
What are three reasons that an organization with multiple branch offices and roaming users might implement a Cisco VPN solution instead of point-to-point WAN links? 
(Choose three.)

  • A: reduced cost
  • B: better throughput
  • C: broadband incompatibility
  • D: increased security
  • E: scalability
  • F: reduced latency









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset