Download Implementing Aruba Campus Switching solutions.test-king.HPE6-A45.2018-11-20.1e.69q.vcex
Download Exam
File Info
| Exam | Implementing Aruba Campus Switching solutions |
| Number | HPE6-A45 |
| File Name | Implementing Aruba Campus Switching solutions.test-king.HPE6-A45.2018-11-20.1e.69q.vcex |
| Size | 4.88 Mb |
| Posted | November 20, 2018 |
| Downloads | 117 |
How to open VCEX & EXAM Files?
Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.
Coupon: EXAMFILESCOM
With discount: 20%
Demo Questions
Question 1
An AOS-Switch needs to be configured to support tunneled node in role-based mode. The Mobility Controller administrators tell the switch administrators that the AOS-Switch will integrate with a cluster of Mobility Controllers. The cluster virtual IP address is 10.1.1.10.
How should switch administrator integrate the AOS-Switch with the cluster?
How should switch administrator integrate the AOS-Switch with the cluster?
- A: Double-check the settings with the Mobility Controller administrators because the planned configuration is incomplete with the switch settings.
- B: Configure the virtual IP address as the tunneled-node-server address, tunneled node will work, but the clustering features will not provide redundancy.
- C: Configure the virtual IP address as the tunneled-node-server address. The switch will automatically learn controller IP addresses to which to tunnel various traffic.
- D: Configure the virtual IP address for the primary tunneled-node-server and an actual controller IP address for the backup tunneled-node-server in order to receive redundancy.
Question 2
Refer to the exhibit.
A company wants to change Area 1 shown in the exhibit from a stub area to a totally stub area.
What will be one effect of this planned change?
A company wants to change Area 1 shown in the exhibit from a stub area to a totally stub area.
What will be one effect of this planned change?
- A: Routing devices within Area 0 will temporarily lose adjacency with each other.
- B: Switch-1 and Switch-2 will adjust the cost with which they advertise area 1 traffic in the backbone.
- C: Some traffic from Area 1 to other areas will no longer follow the lowest cost path.
- D: Endpoints within Area 1 will no longer be able to reach endpoints in other areas.
Question 3
An AOS-Switch runs IGMP on A VLAN.
What is a requirement for the switch to be a potential IGMP querier on that VLAN?
What is a requirement for the switch to be a potential IGMP querier on that VLAN?
- A: The switch must run PIM-SM or PIM-DM on that VLAN.
- B: The switch must have an IP address on that VLAN.
- C: The switch must have IGMP fast leave disabled globally.
- D: The switch must have at least one IGMP group configured on it manually.
Question 4
Refer to the exhibit.
Switch-1 runs BGP. What should the network administrator do to permit Switch-1 to establish a neighbor relationship with Router-1?
Switch-1 runs BGP. What should the network administrator do to permit Switch-1 to establish a neighbor relationship with Router-1?
- A: Configure 192.168.1.2 as a neighbor manually within the BGP context.
- B: Specify 192.168.1.0/30 with the network command in the BGP context.
- C: Enable BGP on VLAN 100.
- D: Set the BGP AS number to 46501.
Question 5
Refer to the exhibit.
An AOS-Switch has an extended ACL that is applied to several physical interfaces.
New interfaces have been brought online.
The ACL has been applied to them as well.
A network administrator sees the output in the exhibit and is concerned that the switch will reach the limit for rules.
What can the administrator do to address this concern?
An AOS-Switch has an extended ACL that is applied to several physical interfaces.
New interfaces have been brought online.
The ACL has been applied to them as well.
A network administrator sees the output in the exhibit and is concerned that the switch will reach the limit for rules.
What can the administrator do to address this concern?
- A: Resequence the ACL with less space in between the entries.
- B: Enable ACL grouping, and apply ACLs as shared ACLs.
- C: Reconfigure the ACL as a standard ACL, and then reapply it.
- D: Remove static ACLs, and have the RADIUS server send dynamic ACLs.
Question 6
Refer to the exhibit.
A company requires distribution layer switches that can provide Layer 2 and Layer 3 redundancy. The exhibit shows the proposal for these switches.
Which change to the proposal will help meet the company’s requirements?
A company requires distribution layer switches that can provide Layer 2 and Layer 3 redundancy. The exhibit shows the proposal for these switches.
Which change to the proposal will help meet the company’s requirements?
- A: The proposed switches should be replaced with switches such as the Aruba 2930M to support the backplane stacking technology.
- B: VRRP should be implemented instead of backplane stacking to support the Layer 3 redundancy requirements.
- C: Link aggregations should be established without LACP to support the Layer 2 redundancy requirements and backplane stacking limitations.
- D: The proposed switches should be replaced with switches that support VSF to support the required distance between stack members.
Question 7
Network administrators need to track when traffic matches deny entry in an ACL applied to a port. They want the alert to be sent to a syslog server that is already set up to send logs.
What should administrators do to enable alerts?
What should administrators do to enable alerts?
- A: Specify the log option for the ACL entry, and enable ACL debugging.
- B: Set the debug destination to session, and enable ACL debugging.
- C: Enable ACL debugging, and enable SNMP port security traps.
- D: Specify the log option for the ACL entry, and enable SNMP port security traps.
Question 8
Refer to the exhibits.
Exhibit 1
Exhibit 2
In the exhibits, VLAN 20 under a device name indicates that the device is configured with that VLAN. The exhibits also indicate whether VLAN 20 is statically configured on each link, either as an untagged or a tagged VLAN. If the link has no label, VLAN 20 is not statically configured on that link.
A network administrator needs to deploy AOS-Switches that use port-based tunneled node. The plan calls for tunneled-node endpoints to be assigned to VLAN 20 and for the Aruba Mobility Controller to handle the tunneled-node traffic at Layer 2.
Which exhibit shows the correct plan for VLAN 20 in the wired infrastructure?
Exhibit 1
Exhibit 2
In the exhibits, VLAN 20 under a device name indicates that the device is configured with that VLAN. The exhibits also indicate whether VLAN 20 is statically configured on each link, either as an untagged or a tagged VLAN. If the link has no label, VLAN 20 is not statically configured on that link.
A network administrator needs to deploy AOS-Switches that use port-based tunneled node. The plan calls for tunneled-node endpoints to be assigned to VLAN 20 and for the Aruba Mobility Controller to handle the tunneled-node traffic at Layer 2.
Which exhibit shows the correct plan for VLAN 20 in the wired infrastructure?
- A: A
- B: B
- C: C
- D: D
Question 9
Refer to the exhibits.
Exhibit 1
Exhibit 2
Switch-1 has a power issue that causes it to fail. When Switch-1 comes back up, endpoints lose connectivity for a few minutes. The network administrator decides to enter this command on Switch-1:
Switch-1 (config)# vlan 10 vrrp vrid 10 preempt-delay-time 120
Exhibit 2 shows the VRRP configuration just after the change. What is the effect of this change?
Exhibit 1
Exhibit 2
Switch-1 has a power issue that causes it to fail. When Switch-1 comes back up, endpoints lose connectivity for a few minutes. The network administrator decides to enter this command on Switch-1:
Switch-1 (config)# vlan 10 vrrp vrid 10 preempt-delay-time 120
Exhibit 2 shows the VRRP configuration just after the change. What is the effect of this change?
- A: Switch-1 and Switch-2 both become Master in their own VRRP virtual router due to the delay timer mismatch. The mismatch must be fixed.
- B: Switch-1 now waits to take over as Master if it fails and recovers. This should prevent the connectivity issue from occurring again.
- C: Switch-1 experiences an internal error in the VRRP process. This error causes Switch-2 to take over as Master for VLAN 2.
- D: Switch-1 continues to act as it did before the preempt delay time was set. Administrators must plan additional changes to fix the issue.
Question 10
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 1 shows a portion of the BGP routing table when the BGP solution was first deployed. Exhibit 2 shows the same portion at the current time.
What can explain the current state?
Exhibit 1
Exhibit 2
Exhibit 1 shows a portion of the BGP routing table when the BGP solution was first deployed. Exhibit 2 shows the same portion at the current time.
What can explain the current state?
- A: Due to changes in the private network, Switch-1 can no longer reach 192.168.2.1.
- B: Switch-1 can no longer reach ISP 1 at 192.168.1.1.
- C: Due to changes at ISP 1, Switch-1 now selects a different best route.
- D: An administrator has applied a route map on Switch-1 that filters advertised routes.
HOW TO OPEN VCEX AND EXAM FILES
Use ProfExam Simulator to open VCEX and EXAM files
HOW TO OPEN VCE FILES
Use VCE Exam Simulator to open VCE files
