Download Implementing Aruba Campus Switching solutions.PracticeTest.HPE6-A45.v1-0.1e.40q.vcex

Download Exam

File Info

Exam Implementing Aruba Campus Switching solutions
Number HPE6-A45
File Name Implementing Aruba Campus Switching solutions.PracticeTest.HPE6-A45.v1-0.1e.40q.vcex
Size 3.11 Mb
Posted August 01, 2018
Downloads 109

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.


With discount: 20%


Demo Questions

Question 1

Switch-1 runs BGP. What should the network administrator do to permit Switch-1 to establish a neighbor relationship with Router-1?

  • A: Configure as a neighbor manually within the BGP context.
  • B: Specify with the network command in the BGP context.
  • C: Enable BGP on VLAN 100.
  • D: Set the BGP AS number to 46501.

Question 2

An AOS-Switch has an extended ACL that is applied to several physical interfaces. 
New interfaces have been brought online. 
The ACL has been applied to them as well. 
A network administrator sees the output in the exhibit and is concerned that the switch will reach the limit for rules. 
What can the administrator do to address this concern?

  • A: Resequence the ACL with less space in between the entries.
  • B: Enable ACL grouping, and apply ACLs as shared ACLs.
  • C: Reconfigure the ACL as a standard ACL, and then reapply it.
  • D: Remove static ACLs, and have the RADIUS server send dynamic ACLs.

Question 3

A company requires distribution layer switches that can provide Layer 2 and Layer 3 redundancy. The exhibit shows the proposal for these switches. Which change to the proposal will help meet the company’s requirements?

  • A: The proposed switches should be replaced with switches such as the Aruba 2930M to support the backplane stacking technology.
  • B: VRRP should be implemented instead of backplane stacking to support the Layer 3 redundancy requirements.
  • C: Link aggregations should be established without LACP to support the Layer 2 redundancy requirements and backplane stacking limitations.
  • D: The proposed switches should be replaced with switches that support VSF to support the required distance between stack members.

Question 4
Network administrators need to track when traffic matches deny entry in an ACL applied to a port. They want the alert to be sent to a syslog server that is already set up to send logs. 
What should administrators do to enable alerts?

  • A: Specify the log option for the ACL entry, and enable ACL debugging.
  • B: Set the debug destination to session, and enable ACL debugging.
  • C: Enable ACL debugging, and enable SNMP port security traps.
  • D: Specify the log option for the ACL entry, and enable SNMP port security traps.

Question 5
Exhibit 1 


Exhibit 2 


In the exhibits, VLAN 20 under a device name indicates that the device is configured with that VLAN. The exhibits also indicate whether VLAN 20 is statically configured on each link, either as an untagged or a tagged VLAN. If the link has no label, VLAN 20 is not statically configured on that link. 
A network administrator needs to deploy AOS-Switches that use port-based tunneled node. The plan calls for tunneled-node endpoints to be assigned to VLAN 20 and for the Aruba Mobility Controller to handle the tunneled-node traffic at Layer 2. Which exhibit shows the correct plan for VLAN 20 in the wired infrastructure?

  • A: A
  • B: B
  • C: C
  • D: D

Question 6
Refer to the exhibits. 
Exhibit 1 


Exhibit 2 


Switch-1 has a power issue that causes it to fail. When Switch-1 comes back up, endpoints lose connectivity for a few minutes. The network administrator decides to enter this command on Switch-1:
Switch-1 (config)# vlan 10 vrrp vrid 10 preempt-delay-time 120 
Exhibit 2 shows the VRRP configuration just after the change. What is the effect of this change?

  • A: Switch-1 and Switch-2 both become Master in their own VRRP virtual router due to the delay timer mismatch. The mismatch must be fixed.
  • B: Switch-1 now waits to take over as Master if it fails and recovers. This should prevent the connectivity issue from occurring again.
  • C: Switch-1 experiences an internal error in the VRRP process. This error causes Switch-2 to take over as Master for VLAN 2.
  • D: Switch-1 continues to act as it did before the preempt delay time was set. Administrators must plan additional changes to fix the issue.

Question 7
Refer to the exhibits. 
Exhibit 1 


Exhibit 2 


Exhibit 1 shows a portion of the BGP routing table when the BGP solution was first deployed. Exhibit 2 shows the same portion at the current time. What can explain the current state?

  • A: Due to changes in the private network, Switch-1 can no longer reach
  • B: Switch-1 can no longer reach ISP 1 at
  • C: Due to changes at ISP 1, Switch-1 now selects a different best route.
  • D: An administrator has applied a route map on Switch-1 that filters advertised routes.

Question 8
Which switches can be deployed in a mesh topology for backplane stacking?

  • A: Aruba 2920 switches
  • B: Aruba 2930F switches
  • C: Aruba 2930M switches
  • D: Aruba 3810 switches

Question 9
A network administrator needs to create a QoS policy on an AOS-Switch. What is one component that the administrator must create before the policy?

  • A: an extended IPv4 ACL
  • B: a traffic behavior
  • C: an extended MAC ACL
  • D: a traffic class

Question 10
Refer to the exhibits. 
Exhibit 1 


Exhibit 2 


Switch-1 and Switch-2 are configured to provide VRRP in VLAN 2. The default gateway for VLAN 2 is set to the VRRP virtual IP. Client-1 in VLAN 2 cannot ping its default gateway. 
Based on the exhibits, what can administrators determine?

  • A: The VRRP preempt delay time has not yet expired, and administrators should try to ping the gateway again in several minutes.
  • B: Switch-1 and Switch-2 have the same virtual router ID. The conflict interferes with connectivity.
  • C: Preempt mode is enabled on both Switch-1 and Switch-2, so the Master role continues to alternate between them, and the pings go astray.
  • D: This is the expected behavior, and Switch-1 should still be able to route traffic for Client-1.


You can buy ProfExam with a 20% discount..

Get Now!


Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen


Use VCE Exam Simulator to open VCE files