Download HP.HPE6-A45.1e.34q.vcex

Download Exam

File Info

Exam Implementing Aruba Campus Switching solutions
Number HPE6-A45
File Name HP.HPE6-A45.1e.34q.vcex
Size 2.45 Mb
Posted July 24, 2018
Downloads 109

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.


With discount: 20%


Demo Questions

Question 1
Refer to the exhibits. 
Exhibit 1. 

Exhibit 2. 

The VoIP phone connects, authenticates successfully, and is dynamically assigned to tagged VLAN 6. The endpoint connected to the phone does not authenticate but starts to send untagged traffic. 
How does the switch handle this traffic?

  • A: It forwards the traffic in VLAN 5.
  • B: It relays the traffic to the RADIUS server for authentication.
  • C: It forwards the traffic in VLAN 6.
  • D: It drops the traffic.

Question 2
An AOS-Switch needs to be configured to support tunneled node in role-based mode. The Mobility Controller administrators tell the switch administrators that the AOS-Switch will integrate with a cluster of Mobility Controllers. The cluster virtual IP address is 
How should switch administrator integrate the AOS-Switch with the cluster?

  • A: Double-check the settings with the Mobility Controller administrators because the planned configuration is incomplete with the switch settings.
  • B: Configure the virtual IP address as the tunneled-node-server address, tunneled node will work, but the clustering features will not provide redundancy.
  • C: Configure the virtual IP address as the tunneled-node-server address. The switch will automatically learn controller IP addresses to which to tunnel various traffic.
  • D: Configure the virtual IP address for the primary tunneled-node-server and an actual controller IP address for the backup tunneled-node-server in order to receive redundancy.

Question 3
Refer to the exhibit. 

A company wants to change Area 1 shown in the exhibit from a stub area to a totally stub area. 
What will be one effect of this planned change?

  • A: Routing devices within Area 0 will temporarily lose adjacency with each other.
  • B: Switch-1 and Switch-2 will adjust the cost with which they advertise area 1 traffic in the backbone.
  • C: Some traffic from Area 1 to other areas will no longer follow the lowest cost path.
  • D: Endpoints within Area 1 will no longer be able to reach endpoints in other areas.

Question 4
An AOS-Switch runs IGMP on A VLAN. 
What is a requirement for the switch to be a potential IGMP querier on that VLAN?

  • A: The switch must run PIM-SM or PIM-DM on that VLAN.
  • B: The switch must have an IP address on that VLAN.
  • C: The switch must have IGMP fast leave disabled globally.
  • D: The switch must have at least one IGMP group configured on it manually.

Question 5
Refer to the exhibit. 

Switch-1 runs BGP. What should the network administrator do to permit Switch-1 to establish a neighbor relationship with Router-1?

  • A: Configure as a neighbor manually within the BGP context.
  • B: Specify with the network command in the BGP context.
  • C: Enable BGP on VLAN 100.
  • D: Set the BGP AS number to 46501.

Question 6
Refer to the exhibit. 

An AOS-Switch has an extended ACL that is applied to several physical interfaces. 
New interfaces have been brought online. 
The ACL has been applied to them as well. 
A network administrator sees the output in the exhibit and is concerned that the switch will reach the limit for rules. 
What can the administrator do to address this concern?

  • A: Resequence the ACL with less space in between the entries.
  • B: Enable ACL grouping, and apply ACLs as shared ACLs.
  • C: Reconfigure the ACL as a standard ACL, and then reapply it.
  • D: Remove static ACLs, and have the RADIUS server send dynamic ACLs.

Question 7
Refer to the exhibit. 

A company requires distribution layer switches that can provide Layer 2 and Layer 3 redundancy. The exhibit shows the proposal for these switches. Which change to the proposal will help meet the company’s requirements?

  • A: The proposed switches should be replaced with switches such as the Aruba 2930M to support the backplane stacking technology.
  • B: VRRP should be implemented instead of backplane stacking to support the Layer 3 redundancy requirements.
  • C: Link aggregations should be established without LACP to support the Layer 2 redundancy requirements and backplane stacking limitations.
  • D: The proposed switches should be replaced with switches that support VSF to support the required distance between stack members.

Question 8
Network administrators need to track when traffic matches deny entry in an ACL applied to a port. They want the alert to be sent to a syslog server that is already set up to send logs. 
What should administrators do to enable alerts?

  • A: Specify the log option for the ACL entry, and enable ACL debugging.
  • B: Set the debug destination to session, and enable ACL debugging.
  • C: Enable ACL debugging, and enable SNMP port security traps.
  • D: Specify the log option for the ACL entry, and enable SNMP port security traps.

Question 9
Refer to the exhibits. 
Exhibit 1 

Exhibit 2 

In the exhibits, VLAN 20 under a device name indicates that the device is configured with that VLAN. The exhibits also indicate whether VLAN 20 is statically configured on each link, either as an untagged or a tagged VLAN. If the link has no label, VLAN 20 is not statically configured on that link. 
A network administrator needs to deploy AOS-Switches that use port-based tunneled node. The plan calls for tunneled-node endpoints to be assigned to VLAN 20 and for the Aruba Mobility Controller to handle the tunneled-node traffic at Layer 2. Which exhibit shows the correct plan for VLAN 20 in the wired infrastructure?

  • A: A
  • B: B
  • C: C
  • D: D

Question 10
Refer to the exhibits. 
Exhibit 1 

Exhibit 2 

Switch-1 has a power issue that causes it to fail. When Switch-1 comes back up, endpoints lose connectivity for a few minutes. The network administrator decides to enter this command on Switch-1:
Switch-1 (config)# vlan 10 vrrp vrid 10 preempt-delay-time 120 
Exhibit 2 shows the VRRP configuration just after the change. What is the effect of this change?

  • A: Switch-1 and Switch-2 both become Master in their own VRRP virtual router due to the delay timer mismatch. The mismatch must be fixed.
  • B: Switch-1 now waits to take over as Master if it fails and recovers. This should prevent the connectivity issue from occurring again.
  • C: Switch-1 experiences an internal error in the VRRP process. This error causes Switch-2 to take over as Master for VLAN 2.
  • D: Switch-1 continues to act as it did before the preempt delay time was set. Administrators must plan additional changes to fix the issue.


You can buy ProfExam with a 20% discount..

Get Now!


Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen


Use VCE Exam Simulator to open VCE files