Download HP.HP5-K03D.1e.28q.vcex


Download Exam

File Info

Exam Delta - Supporting and Servicing HP 3PAR StoreServ Solutions
Number HP5-K03D
File Name HP.HP5-K03D.1e.28q.vcex
Size 274 Kb
Posted July 24, 2018
Downloads 17



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
Refer to the exhibit. 
You are installing an HP 3PAR StoreServ 7200 with an additional M6720 drive enclosure. Where should you install four LFF NL disks and four LFF SSDs in the new enclosure for a supported configuration'?

  • A: SSD drives in Slot 0, 4, 8, and 12; NL drives in Slot 16, 20, 1, and 5
  • B: SSD drives in Slot 0, 4, 8, and 12; NL drives in Slot 3, 7, 11, and 15
  • C: NL drives in Slot 0, 1, 2, and 3; SSD drives in Slot 4, 5, 6, and 7
  • D: NL drives in Slot 0, 3, 20, and 23; SSD drives in Slot 4, 16, 7, and 19



Question 2
A customer has tested an HP 3PAR StoreServ 7000 in a try-and-buy scenario and now wants to buy the system. During the initial setup, the customer decides against a connection to HP 3PAR Central. The customer wants you to enable the connection in Secure Network Mode (SNM). Which port should you enable on the customer's firewall?

  • A: 20 (FTP)
  • B: 161 (SNMP)
  • C: 389 (LDAP)
  • D: 443 (HTTPS)



Question 3
What is the procedure change when you use HP 3PAR SmartStart during an HP 3PAR StoreServ 7000 installation?

  • A: A default password is no longer generated for the 3paradm account.
  • B: The serial ports on the system are disabled.
  • C: All hosts accessing LUNs on the system must be configured using HP 3PAR SmartStart.
  • D: The Virtual Service Processor must be used



Question 4
Your customer has a two-node HP 3PAR StoreServ 7400 with two additional drive shelves. They have just purchased an additional 16 SFF drives. What must the customer do when adding the drives to the enclosures'?

  • A: Perform an autonomic rebalance after adding the drives,
  • B: Run System Tuner on the CPGs using the new drives.
  • C: Add a minimum of two drives to each enclosure
  • D: Attach the same number and type of drives to each node pair.



Question 5
A customer has two HP 3PAR T800 systems with Inform OS v2.3.1 in two separate locations Data is being replicated between systems using Remote Copy. The customer wants you to develop a plan for upgrading the environment to the HP 3PAR OS v3.12. What should you consider in your planning?

  • A: All participating systems must be upgraded to the same major OS within 5 weeks.
  • B: It is not necessary to stop the Remote Copy groups for online updates.
  • C: Downtime must be scheduled because you cannot upgrade online from v2.3 1 to v3.1 2 directly.
  • D: Necessary updates to the hosts as required in the Interoperability Matrix can be installed after the Inform OS update.



Question 6
To troubleshoot the storage system installation failure of an HP 3PAR StoreServ 7000, HP support requests that you collect some logfiles. Which logfiles do you need to collect? (Select two.)

  • A: SPOCC log files
  • B: SP log files
  • C: SP audit log files
  • D: node boot messages log file
  • E: SmartStart log files



Question 7
You support a leading provider with two new HP 3PAR StoreServ 7200 systems. 
Which statements concerning the disk drive configuration are true? (Select two.)

  • A: The DP1 of the HP 3PAR StoreServ 7200 is limited to three expansion drive enclosures.
  • B: The disk drives in the node enclosure are connected internally through DP2.
  • C: The combined total node and drive enclosure for the HP 3PAR StoreServ 7200 is nine
  • D: The DP2 of the HP 3PAR StoreServ 7200 is limited to three expansion drive enclosures.
  • E: The minimum addition to a two-node system without expansion drive enclosures is two identical disk drives.



Question 8
Your customer has an HP 3PAR StoreServ 7200 with an all-SSD configuration. They have a requirement for a second tier of higher capacity 300GB 15K drives You need to add the new FC class drives. What is the minimum number of disks you should include in your solution?

  • A: 2
  • B: 4
  • C: 6
  • D: 8



Question 9
You are performing an upgrade for a customer who has an HP 3PAR StoreServ 7400 with two nodes. The upgrade must fulfill the customer's following needs 
- more capacity and performance 
- second node pair added to the system 
- capability for the system to use iSCSI and in the future FCoE 
What should you verify before and during the upgrade? (Select two.)

  • A: that the storage system is rebalanced before the upgrade
  • B: that the first two nodes are running in maintenance mode during the upgrade
  • C: that no additional configuration of the CNA cards is necessary
  • D: that interconnect cables are directional and are installed correctly
  • E: that nodes in a node pair have identical HBA/CNA configurations



Question 10
You are creating a CPG and want to ensure that the HA Cage is available with RAID 5. Which best practice should you follow to achieve this goal?

  • A: Daisy-chain all drive enclosures together on both SAS busses.
  • B: Confirm that the number of enclosures is equal to or greater than the set size
  • C: Choose HA Cage sparing when initializing the storage.
  • D: Make a drive enclosure dedicated to parity








ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset