Download CompTIA Network+ 2018.PracticeTest.N10-007.2018-10-09.1e.78q.vcex

Download Dump

File Info

Exam CompTIA Network+ 2018
Number N10-007
File Name CompTIA Network+ 2018.PracticeTest.N10-007.2018-10-09.1e.78q.vcex
Size 108 Kb
Posted October 09, 2018
Downloaded 111



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
A technician attempts to replace a switch with a new one of similar model from the same vendor. When the technician moves the fiber and SFP plug, the switch does not completely boot up. Considering that the config files are the same, which of the following is the MOST likely cause of the failure?

  • A: Damaged fiber
  • B: Corrupted operating system
  • C: VLAN mismatch
  • D: Bad port



Question 2
A company has hundreds of nodes on a single subnet and has decided to implement VLANs. Which of the following BEST describes the benefit of this approach?

  • A: It segments broadcast domains in the network infrastructure
  • B: It provides a faster port to all servers
  • C: It provides multiple collision domains on one switchport
  • D: It provides multiple broadcast domains within a single collision domain



Question 3
A company has completed construction of a new datacenter, and the IT staff is now planning to relocate all server and network equipment from the old site to the new site. 
Which of the following should the IT staff reference to determine the location of the equipment being moved?

  • A: Rack diagrams
  • B: Network topology
  • C: Standard operating procedures
  • D: Wiring documentation



Question 4
Which of the following would allow a device to maintain the same IP address lease based on the physical address of the network card?

  • A: MAC address reservation
  • B: Static IP address
  • C: IP address exclusion
  • D: Custom DNS server entry



Question 5
A technician wants to prevent an unauthorized host from connecting to the network via Ethernet. Which of the following is a Layer 2 access control the technician should implement?

  • A: Access control lists
  • B: Captive portal
  • C: WPA2
  • D: Port security



Question 6
A network engineer is configuring wireless access for guests at an organization. Access to other areas in the organization should not be accessible to guests. 
Which of the following represents the MOST secure method to configure guest access to the wireless network?

  • A: Guests should log into a separate wireless network using a captive portal
  • B: Guests should log into the current wireless network using credentials obtained upon entering the facility
  • C: The existing wireless network should be configured to allow guest access
  • D: An additional wireless network should be configured to allow guest access



Question 7
The server team has just installed an application across three different servers. They are asking that all requests to the application are spread evenly across the three servers. 
Which of the following should the network team implement to fulfil the request?

  • A: Proxy server
  • B: UTM appliance
  • C: Content filter
  • D: Load balancer



Question 8
A network technician is deploying mobile phones for a company’s sales staff. Salespeople frequently travel nationally and internationally to meet with clients, and often have to roam or switch cellular providers. Which of the following standards is the BEST option to fit the requirements?

  • A: GSM
  • B: TDM
  • C: CDMA
  • D: PSTN
  • E: MIMO



Question 9
A network administrator configures a router with the following IP address information:
Gigabit Ethernet 1 Interface: 10.10.0.1/24
Serial 0 Interface: 10.10.0.253/30
Clients are connected to a switch on the gigabit Ethernet interface; the ISP is connected to the Serial 0 interface. When the router configuration is complete and client devices are reconfigured, all clients report that they are unable to connect to the Internet. Which of the following is the MOST likely reason?

  • A: The router was configured with an incorrect IP address
  • B: The router was configured with an incorrect default gateway
  • C: The router was configured with an incorrect subnet mask
  • D: The router was configured with an incorrect loopback address



Question 10
A penetration tester has been tasked with reconnaissance to determine which ports are open on the network. Which of the following tasks should be done FIRST? (Choose two.)

  • A: Network scan
  • B: Banner grab
  • C: Tracert
  • D: DHCP server check
  • E: Brute-force attack









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset