Download CCIE Wireless Written Exam.testking.400-351.2020-01-10.1e.179q.vcex


Download Exam

File Info

Exam CCIE Wireless Written Exam
Number 400-351
File Name CCIE Wireless Written Exam.testking.400-351.2020-01-10.1e.179q.vcex
Size 6.18 Mb
Posted January 10, 2020
Downloads 7



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
  

Refer to the exhibit. You have been asked to troubleshoot why VTP is not distributing new VLANs to a VTP client switch. Which option is the most likely root cause of this VTP problem?

  • A: The VTP password is incorrect on the client switch.
  • B: The client switch is set to transparent mode, which ignores VLAN configuration updates from VTP servers.
  • C: The VTP encryption level does not match on the client switch.
  • D: The VTP password encryption level is not set on the client switch.
  • E: The VTP is not set to level 15 on the client switch.



Question 2
Which AireOS release is the first to support New Mobility on the Cisco 2504 WLC?

  • A: 8.1.x
  • B: 7.6.x
  • C: 7.4.x
  • D: 8.0.x



Question 3
VLAN Trunking Protocol is a Cisco protocol that propagates the definition of VLANs over the local area network. Which two statements are true? (Choose two.)

  • A: When Cisco switches are started from scratch, they are in server mode and their domain is set to null.
  • B: VTP transparent mode forwards VTP packets and can act as a client or a server.
  • C: VTP requires trunk mode interfaces to propagate.
  • D: VTP config revision increases based on switch uptime.
  • E: VTP requires access mode interfaces to propagate.



Question 4
You are designing a wireless network for a museum. One of their requirements is to track people inside the museum and push a notification into their tablet device as soon as they step in front of the painting with information about the artist and the painting. This information must be delivered in real time. You are using regular probe request-based tracking and, during testing, you notice that although the tablet is connected to the museum Wi-Fi network, the location is not updating in real time as you move. It can take almost two minutes for the location to be updated.  
Which option is the likely reason for this issue?

  • A: Probe request-based tracking is bound to delay due to the broadcast type of traffic that is not acknowledged over the air and could be lost.
  • B: CCXv4 S60 is disabled by default. You must enable CCXv4 S60, which is compatible with all Wi-Fi clients. This feature carries out location updates more frequently.
  • C: Cisco MSE does not perform a new location calculation for certain elements if the resulting position is not at least 5 meters different than previous location.
  • D: Probe request-based tracking is device dependent. The tablet might not send a prove request if it is maintaining a good Wi-Fi signal, which can cause slower location updates.



Question 5
  

Refer to the exhibit. Which option describes what this sequence of commands achieves on a Cisco Autonomous AP?

  • A: This example shows how to permit any SNMP manager to access all objects with read-only permission using the community stringpublic. The access point also sends config traps to the hosts 192.180.1.111 and 192.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community stringpublicis sent with the traps.
  • B: This example shows how to permit any SNMP manager to access all objects with read-only permission using the community stringpublic. The access point also sends config traps to the hosts 192.180.1.111 and 192.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community stringpublicis not sent with the traps as this is the default.
  • C: This example shows how to permit any SNMP access to all objects with read-only permission to only three specific IP addresses using the community stringpublic.The access point also sends config traps to the hosts 192.180.1.111 and 192.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community stringpublicis sent with the traps.
  • D: This example shows how to permit any SNMP access to all objects with read-only permission to only three specific IP addresses using the community stringpublic.The access point also sends config traps to the hosts 192.180.1.111 and 192.180.1.33 using SNMPv1 and to the host 192.180.1.27 using SNMPv2C. The community stringpublicis not sent with the traps.



Question 6
  

Refer to the exhibit, which is a configuration snippet of a Cisco 5760 controller code IOS XE 3.6.3. Which statement about wlan 11 is true?

  • A: This configuration is for external WebAuth with an external Radius server.
  • B: This configuration is for WebAuth with local authentication.
  • C: This configuration is for WebAuth with an external RADIUS server.
  • D: This configuration is for custom WebAuth with local authentication.
  • E: This configuration is for custom WebAuth with an external RADIUS server.



Question 7
Which three conditions can trigger a client exclusion policy? (Choose three.)

  • A: excessive 802.11 association failures
  • B: excessive 802.1x authentication failures
  • C: IP theft or IP reuse
  • D: excessive 802.11 probe request failures
  • E: excessive 802.1x authorization failures
  • F: excessive 802.11 packet retries



Question 8
Which statement is true when setting up switch ports for APs?

  • A: Only APs in FlexConnect mode are susceptible to round-trip latency problems (between the access point and the controller).
  • B: APs in FlexConnect local switching must always connect to an access switch port.
  • C: With PortFast, there is always a risk of loops because local mode APs bridge traffic directly between VLANs.
  • D: For APs in local mode, or FlexConnect mode doing only central switched WLANs, it is recommended to configure the switch port with PortFast.



Question 9
When aggressive load-balancing is enabled on the WLAN, by default how many clients must connect before the load-balancing kicks in?

  • A: 10
  • B: 3
  • C: 12
  • D: 5



Question 10
Which two statements about verifying the switch port configurations of an access point and a wireless LAN controller are true? (Choose two.)

  • A: If a guest anchor WLC is deployed, the guest client VLAN must be permitted on the switch trunk port of the anchor WLC.
  • B: In central switching, client VLANs must be permitted on the switch trunk port where the AP is connected.
  • C: If a guest anchor WLC is deployed, the guest client VLAN must be permitted on the switch trunk port of the foreign WLC.
  • D: In local switching, client VLANs must be permitted on the switch trunk port where the AP is connected.
  • E: In local switching, client VLANs must be permitted on the switch trunk port where the WLC is connected.









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset