Download CCIE Security Written Exam v5-1.braindumps.400-251.2019-10-03.1e.185q.vcex


Download Exam

File Info

Exam CCIE Security Written Exam v5.1
Number 400-251
File Name CCIE Security Written Exam v5-1.braindumps.400-251.2019-10-03.1e.185q.vcex
Size 3.71 Mb
Posted October 03, 2019
Downloads 26


How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
 
 


Demo Questions

Question 1
What are the two different modes in which Private AMP cloud can be deployed? (Choose two.)

  • A: Cloud-Proxy Mode
  • B: Internal Mode
  • C: Air Gap Mode
  • D: Hybrid Mode
  • E: Public Mode
  • F: External Mode
Correct Answer: AC
Reference: http://www.cisco.com/c/en/us/products/collateral/security/fireamp-private-cloud-virtual-appliance/datasheet-c78-733180.html



Question 2
Which three commands can you use to configure VXLAN on a Cisco ASA firewall? (Choose three.)

  • A: default-mcast-group
  • B: set ip next-hop verify-availability
  • C: sysopt connection tcpmss
  • D: segment-id
  • E: inspect vxlan
  • F: nve-only
Correct Answer: ADF



Question 3
Which Cisco ISE profiler service probe can collect information about Cisco Discovery Protocol?

  • A: SNMP Query
  • B: DCHP SPAN
  • C: DCHP
  • D: HTTP
  • E: RADIUS
  • F: NetFlow
Correct Answer: F



Question 4
Which two statements about NetFlow Secure Event Logging on a Cisco ASA are true? (Choose two.)

  • A: It is supported only in single-context mode.
  • B: It can log different event types on the same device to different collectors.
  • C: It tracks configured collectors over TCP.
  • D: It can be used without collectors.
  • E: It supports one event type per collector.
  • F: It can export templates through NetFlow.
Correct Answer: BF
http://www.cisco.com/c/en/us/td/docs/security/asa/asa92/configuration/general/asa-general-cli/monitor-nsel.pdf



Question 5
View the Exhibit. 

  

Refer to the exhibit. After you applied this EtherChannel configuration to a Cisco ASA, the EtherChannel failed to come up. 
Which reason for the problem is the most likely?

  • A: The channel-group modes are mismatched.
  • B: The lacp system-priority and lacp port-priority values are the same.
  • C: The EtherChannel requires three ports, and only two are configured.
  • D: The EtherChannel is disabled.
Correct Answer: C



Question 6
Which option best describes RPL?

  • A: RPL stands for Routing over Low-power Lossy Networks that use link-state LSAs to determine the best route between leaves and the root border router.
  • B: RPL stands for Routing over Low-power Lossy Networks that use distance vector DOGAG to determine the best route leaves and the root border router.
  • C: RPL stands for Routing over low priority links that use link-state LSAs to determine the best route between two root border routers.
  • D: RPL stands for Routing overlow priority links that use distance vector DOGAG to determine the best route between two root border routers.
Correct Answer: B
RPL is a distance vector protocol and supports a wide set of routing link and node metrics. RPL supports mono metric optimization—the best path is considered as the shortest (constrained) path according to a single metric (multimetric optimization is not supported). The objective is to not trade path optimality for network stability. A small path cost increase is usually smoothed out for the benefit of limiting the control plane traffic. 
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/rpl/configuration/15-mt/rpl-15-mt-book.html#concept_56393E63C4D74ABAB7A25049C2345053



Question 7
Which two options are benefits of global ACLs? (Choose two.)

  • A: The only operate on logical interfaces.
  • B: They are more efficient because they are processed before interface access rules.
  • C: They can be applied to multiple interfaces.
  • D: They are flexible because they match source and destination IP addresses for packets that arrive on any interface.
  • E: They save memory because they work without being replicated on each interface.
Correct Answer: DE
Global access rules allow you to apply a global rule to ingress traffic without the need to specify an interface to which the rule must be applied. Using global access rules provides the following benefits:
When migrating to the adaptive security appliance from a competitor appliance, you can maintain a global access rule policy instead of needing to apply an interface-specific policy on each interface. 
Global access control policies are not replicated on each interface, so they save memory space. 
Global access rules provides flexibility in defining a security policy. You do not need to specify which interface a packet comes in on, as long as it matches the source and destination IP addresses. 
Global access rules use the same mtrie and stride tree as interface-specific access rules, so scalability and performance for global rules are the same as for interface-specific rules. 
Reference:http://www.cisco.com/c/en/us/td/docs/security/asa/asa83/configuration/guide/config/access_rules.html



Question 8
Which three statements about 802.1x multiauthentication mode are true? (Choose three.)

  • A: It can be deployed in conjunction with MDA functionality on voice VLANs.
  • B: It requires each connected client to authenticate individually.
  • C: Each multiauthentication port can support only one voice VLAN.
  • D: It is recommended for auth-fail VLANs.
  • E: On non-802.1x devices, it can support only one authentication method on a single port.
  • F: It is recommended for guest VLANs.
Correct Answer: ABC
Available in Cisco IOS Release 12.2(50)SG, multiauthentication mode allows one client on the voice VLAN and multiple authenticated clients on the data VLAN. When a hub or access point is connected to an 802.1X port, multiauthentication mode provides enhanced security over multiple-hosts mode by requiring authentication of each connected client. For non-802.1X devices, you can use MAB or web-based authentication as the fallback method for individual host authentications, allowing you to authenticate different hosts through different methods on a single port.  
Multiauthentication also supports MDA functionality on the voice VLAN by assigning authenticated devices to either a data or voice VLAN depending on the VSAs received from the authentication server. 
Reference:http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/50sg/configuration/guide/Wrapper-46SG/dot1x.html#wp1309093



Question 9
View the Exhibit. 

  

Refer to the exhibit. Which three additional configuration elements must you apply to complete a functional FlexVPN deployment? (Choose three.)

  • A:
      
  • B:
      
  • C:
      
  • D:
      
  • E:
      
  • F:
      
Correct Answer: BDE
Reference: http://www.cisco.com/c/en/us/support/docs/security/flexvpn/115782-flexvpn-site-to-site-00.html



Question 10
View the Exhibit. 
class-map match-any unknown 
match protocol unknown final 
Refer to the exhibit. Which two configurations must you perform to enable the device to use this class map? (Choose two.)

  • A: Configure PDLM.
  • B: Configure the ip nbar custom command.
  • C: Configure the ip nbar protocol discovery command.
  • D: Configure the transport hierarchy.
  • E: Configure the DSCP value.
Correct Answer: AC
Reference:http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos_nbar/configuration/15-mt/qos-nbar-15-mt-book/nbar-mqc.html






CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset