Download CCIE Data Center Written Exam.testking.400-151.2019-09-12.1e.194q.vcex

Download Dump

File Info

Exam CCIE Data Center Written Exam
Number 400-151
File Name CCIE Data Center Written Exam.testking.400-151.2019-09-12.1e.194q.vcex
Size 9.35 Mb
Posted September 12, 2019
Downloads 4



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
Which two statements about VXLAN are true? (Choose two.)

  • A: VXLAN uses a UDP destination port of 4987.
  • B: A VTEP is a virtual or physical device that maps end devices to VXLAN segments.
  • C: Devices that terminate VXLAN tunnels are known as VTEPs.
  • D: VXLAN adds an additional 32 bytes worth of headers.



Question 2
Which statement about VTP bombing is true?

  • A: It occurs because of configuration mismatch on VTPv3 switches. This problem can be avoided using a confirmation management tool.
  • B: It occurs when switches with different VTP versions are connected together. This situation may occur when a new switch is plugged into a stable VTP domain. The MAC address table of the new switch overrides the MAC address table of stable switches causing interruption of service.
  • C: It occurs when a client connects to a switch and launches a distributed denial of service attack against the VTP domain. This attack is possible only ifthe client knows the VTP password.
  • D: It occurs when a server with a higher revision number and a wrong VTP database is inserted into the VTP domain. This situation may occur when a new switch plugged into a stable VTP domain. The incorrect database is propagated to the domain and the earlier stable database is overwritten.



Question 3
Which three options are common PTP device types? (Choose three.)

  • A: network clock
  • B: sundials
  • C: boundary clock
  • D: transparent clock
  • E: ordinary clock
  • F: crystal clock



Question 4
Which two options are functions of the 6LoWPAN header? (Choose two.)

  • A: packet fragmentation and reassembly
  • B: limit the lifespan of a packet (TTL)
  • C: IPv6 header compression
  • D: cyclic redundancy check
  • E: Layer 2 encryption



Question 5
Which two statements about IP-directed broadcast are true? (Choose two.)

  • A: The destination address in the IP header of the packet is rewritten to the configured IP broadcast address for the subnet, and the packet is sent as a link-layer broadcast.
  • B: An IP-directed broadcast is an IP packet whose destination address is a valid broadcast address, and it originates from a node that is also part of the same subnet.
  • C: A switch that is not directly connectedto its destination subnet forwards an IP-directed broadcast in the same way it forwards unicast IP packets destined to a host on that subnet.
  • D: All switches in the network forward an IP-directed broadcast in the same way they forward multicast IP packets.



Question 6
Which statement about glean throttling in Cisco NX-OS is true?

  • A: The traffic shaping feature in Cisco NX-OS to avoid bottle necks in the network.
  • B: Cisco NX-OS supports a rate-limiting feature to manage the access bandwidth policy for a network by ensuring that traffic falling within specified rate parameters is sent, while dropping packets that exceed the acceptable amount of traffic or sending them a different priority.
  • C: When forwarding an incoming IP packet in a line card, if the Address Resolution Protocol request for the next hop is not resolved, the line card forwards the packets to the supervisor. The supervisor resolves the MAC address for the next hop and programs the hardware.
  • D: The traffic policing feature manages the maximum rate of traffic through a token bucket algorithm. The token bucket algorithm can use the user-configured values to determine the maximum rate of traffic allowed on an interface at a given moment in time.



Question 7
Which two guidelines apply to private VLAN configuration when you are running FabricPath (Choose two.)

  • A: On the F-Series modules, user-configured static MAC addresses are programmed on all forwarding engines that have ports in that VLAN.
  • B: The system does support hierarchical static MAC addresses.
  • C: FabricPath ports can be put into a private VLAN.
  • D: All VLANs in a private VLAN must be in the same VLAN mode; either CE or FabricPath.



Question 8
  

Refer to the exhibit. If you inspect a VXLAN packet at point 2, which two options about the outer fields in the VXLAN header are two? (Choose two.)

  • A: Outer S-IP = IP-1 ; Outer D-IP = IP-2.
  • B: Outer S-IP = IP-A : Outer D-IP = IP-B.
  • C: Outer S-MAC = MAC-1 ; Outer D-MAC= MAC-4.
  • D: Outer S-MAC = NAC-A ; Outer D-MAC = MAC-B.
  • E: Outer S-IP = IP-1 ; Outer D-IP = IP-4.
  • F: Outer S-MAC = MAC-1 ; Outer D-MAC = MAC-2



Question 9
For which two multicast distribution modes is RP Configuration required? (Choose two.)

  • A: BIDIR
  • B: RPF routes for multicast
  • C: SSM
  • D: ASM



Question 10
  

Refer to the exhibit. Within an ACI fabric, a routing protocol is needed to assist with route redistribution between the outside networks and the internal fabric. Which routing protocol is needed to run in the fabric at location 1 to allow the VM access to the networks advertised by the external Layer 3 network.

  • A: iBGP
  • B: eBGP
  • C: IS-IS
  • D: MP-BGP
  • E: OSPF









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset