Download Cisco.PracticeDumps.400-101.2017-11-02.1e.131q.vcex

Download Dump

File Info

Exam CCIE Routing and Switching Written Exam v5.1
Number 400-101
File Name Cisco.PracticeDumps.400-101.2017-11-02.1e.131q.vcex
Size 115 Kb
Posted July 24, 2018
Downloaded 0



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
Which two statements are true about an EVPL? (Choose two.)

  • A: It has a high degree of transparency.
  • B: It does not allow for service multiplexing.
  • C: The EVPL service is also referred to as E-line.
  • D: It is a point-to-point Ethernet connection between a pair of UNIs.



Question 2
After an EtherChannel is configured between two Cisco switches, interface port channel 1 is in the down/down state. Switch A is configured with channel-group 1 mode active, while Switch B is configured with channel-group 1 mode desirable. Why is the EtherChannel bundle not working?

  • A: The switches are using mismatched EtherChannel negotiation modes.
  • B: The switch ports are not configured in trunking mode.
  • C: LACP priority must be configured on both switches.
  • D: The channel group identifier must be different for Switch A and Switch B.



Question 3
Which statement about the spanning-tree portfast feature on the switch is true?

  • A: If an interface is enabled for portfast receives BDPU, the port goes through the spanning-tree listening, learning, and forwarding states.
  • B: If an interface is enabled for portfast receives BDPU, the port does not go through the spanning-tree listening, learning, and forwarding states.
  • C: If an interface is enabled for portfast receives BDPU, the port is shut down immediately.
  • D: If an interface is enabled for portfast receives BDPU, the port goes into the spanning-tree inconsistent state.



Question 4
Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally:
monitor session 2 filter vlan 1-8, 39, 52 
What is the result of the implemented command?

  • A: All VLAN traffic is sent to the SPAN destination interface.
  • B: Traffic from VLAN 4 is not sent to the SPAN destination interface.
  • C: Filtering a trunked SPAN port effectively disables SPAN operations for all VLANs.
  • D: The trunk's native VLAN must be changed to something other than VLAN 1.
  • E: Traffic from VLANs 1 to 8, 39, and 52 is replicated to the SPAN destination port.



Question 5
Refer to the exhibit. 
<img src="CCIE_RS_400-101_140q-3_1.jpg" width="480" height="47"> 
Which three statements about this configuration are true? (Choose three.)

  • A: The default route appears in the global routing table.
  • B: The static route appears in the VRF red routing table.
  • C: The subnet 192.168.1.0 is unique to the VRF red routing table.
  • D: The static route is added to the global routing table and leaked from the VRF red.
  • E: The subnet 192.168.1.0 is unique to the global routing table.
  • F: 192.168.1.1 is reachable using any of the addresses on the router where the static route is configured.



Question 6
Which statement about BGP and diverse path advertisement is true?

  • A: The BGP best-path selection must be disabled.
  • B: The BGP best-path selection algorithm has been changed to always ignore the IGP metric.
  • C: The BGP best-path selection algorithm has been changed so that two BGP paths can be flagged as best in the BGP table.
  • D: The BGP best-path selection algorithm has not been changed.
  • E: The BGP best-path selection is disabled for BGP routes for which the feature is enabled.



Question 7
Refer to the exhibit. 
<img src="CCIE_RS_400-101_140q-4_2.jpg" width="297" height="172"> 
Which statement about the configuration is true?

  • A: This configuration is incorrect because the dialer interface number must be the same as the dialer pool number.
  • B: This configuration is missing an IP address on the dialer interface.
  • C: This configuration is incorrect because the MTU must match the ppp-max-payload that is defined.
  • D: This configuration represents a complete PPPoE client configuration on an Ethernet connection.



Question 8
After the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible. Which vendor-neutral protocol could be used to resolve this issue?

  • A: Local Area Mobility
  • B: Link Layer Discovery Protocol
  • C: NetFlow
  • D: Directed Response Protocol



Question 9
How does having an EIGRP feasible successor speed up convergence?

  • A: EIGRP sends queries only if there is a feasible successor, which decreases the number of routers that are involved in convergence.
  • B: EIGRP sends queries only if there is not a feasible successor, which causes less control traffic to compete with data.
  • C: EIGRP immediately installs the loop-free alternative path in the RIB.
  • D: EIGRP preinstalls the feasible successor in the RIB in all cases, which causes traffic to switch more quickly.



Question 10
After implementing VTP, the extended VLANs are not being propagated to other VTP switches. 
What should be configured for extended VLANs?

  • A: VTP does not support extended VLANs and should be manually added to all switches.
  • B: Enable VTP version 3, which supports extended VLAN propagation.
  • C: VTP authentication is required when using extended VLANs because of their ability to cause network instability.
  • D: Ensure that all switches run the same Cisco IOS version. Extended VLANs will not propagate to different IOS versions when extended VLANs are in use.









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset