Download Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI).Marks4Sure.300-410.2021-03-28.1e.93q.vcex


Download Exam

File Info

Exam Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)
Number 300-410
File Name Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI).Marks4Sure.300-410.2021-03-28.1e.93q.vcex
Size 11.13 Mb
Posted March 28, 2021
Downloads 9


How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
 
 


Demo Questions

Question 1
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap. 
Which command allows the logging on the switch to show the time of the flap according to the clock on the device?

  • A: service timestamps log uptime
  • B: clock summer-time mst recurring 2 Sunday mar 2:00 1 Sunday nov 2:00
  • C: service timestamps log datetime localtime show-timezone
  • D: clock calendar-valid
Correct Answer: C
By default, Catalyst switches add a simple uptime timestamp to logging messages. This is a cumulative counter that shows the hours, minutes, and seconds since the switch has been booted up



Question 2
Which is statement about IPv6 inspection is true?

  • A: It teams and secures bindings for stateless autoconfiguration addresses in Layer 3 neighbor tables
  • B: It learns and secures bindings for stateful autoconfiguration addresses in Layer 3 neighbor tables
  • C: It teams and secures bindings for stateful autoconfiguration addresses in Layer 2 neighbor tables  
  • D: It team and secures binding for stateless autoconfiguration addresses in Layer 2 neighbor tables.
Correct Answer: D



Question 3
Refer to the exhibit.  

      

Users in the branch network of 2001:db8:0:4::/64 report that they cannot access the Internet. Which command is issued in IPv6 router EIGRP 100 configuration mode to solve this issue?

  • A: Issue the eigrp stub command on R1.
  • B: Issue the no eigrp stub command on R1
  • C: Issue the eigrp stub command on R2.
  • D: Issue the no eigrp stub command on R2.
Correct Answer: B



Question 4
Refer to the exhibit. 

      

An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen. What is the reason for this?  

  • A: Dynamic routing protocols always have priority over static routes.
  • B: The metric of the OSPF route is lower than the metric of the static route.
  • C: The configured AD for the static route is higher than the AD of OSPF.
  • D: The syntax of the static route is not valid, so the route is not considered.
Correct Answer: C
The AD of static route is manually configured to 130 which is higher than the AD of OSPF router which is 110.



Question 5
Drag and drop the DHCP messages from the left onto the correct uses on the right.  
 

Correct Answer: Exam simulator is required
DHCPACK 
The server-to-client communication with configuration parameters, including committed network address. 
DHCPINFORM 
The client-to-server communication, asking for only local configuration parameters that the client already has externally configured as an address. 
DHCPNAK 
The server-to-client communication, refusing the request for configuration parameter. 
DHCPDECLINE 
The client-to-server communication, indicating that the network address is already in use 



Question 6
Which IGPs are supported by the MPLS LDP autoconfiguration feature?

  • A: RIPv2 and OSPF
  • B: OSPF and EIGRP
  • C: OSPF and ISIS
  • D: ISIS and RIPv2
Correct Answer: C



Question 7
Refer to the exhibit.  

      

What does the imp-null tag represent in the MPLS VPN cloud?

  • A: Pop the label
  • B: Impose the label
  • C: Include the EXP bit
  • D: Exclude the EXP bit
Correct Answer: A
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet. 
Note: pop means remove the top MPLS label



Question 8
When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”. 
What is the reason for the error?

  • A: The template has an incorrect configuration.
  • B: The software version of the template is different from the software version of the device.
  • C: The changes to the template were not committed.
  • D: The tag that was used to filter the templates does not match the device tag.
Correct Answer: D
If you use tags to filter the templates, you must apply the same tags to the device to which you want to apply the templates. Otherwise, you get the following error during provisioning: Cannot select the device. Not compatible with template.



Question 9
Which component of MPLS VPNs is used to extend the IP address so that an engineer is able to identify to which VPN it belongs?

  • A: VPNv4 address family
  • B: RD
  • C: RT
  • D: LDP
Correct Answer: B



Question 10
An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE. 
Which action should be taken to resolve this issue?

  • A: match the passwords
  • B: match the hello timers
  • C: match the MTUs
  • D: match the network types
Correct Answer: C






CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset