Download Troubleshooting Cisco Wireless Enterprise Network.test-king.300-370.2018-08-31.1e.34q.vcex

Download Exam

File Info

Exam Troubleshooting Cisco Wireless Enterprise Network
Number 300-370
File Name Troubleshooting Cisco Wireless Enterprise Network.test-king.300-370.2018-08-31.1e.34q.vcex
Size 2.74 Mb
Posted August 31, 2018
Downloads 46

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.


With discount: 20%


Demo Questions

Question 1
Refer to the exhibit. 

The AP is unable to join the controller. What is the cause of this error?

  • A: The controller code version is lower than the code of the AP attempting to join.
  • B: AP code is not the same as the controller and must download firmware.
  • C: AP model is not compatible with the controller code version.
  • D: The AP is not configured in the controller auth-list of acceptable APs.

Question 2
Refer to the exhibit. 

Employees upgraded company issued iOS devices, which are configured to authenticate to the network using WPA2-Enterprise 802.1x with LEAP. As a result, the devices are no longer able to authenticate. Which action must the engineer do to resolve the issue?

  • A: Redeploy the existing configuration profile.
  • B: Change LEAP certificate on the ACS server.
  • C: Reset network settings on the devices.
  • D: Rejoin the enterprise network manually.
  • E: Deploy a new configuration profile with LEAP enabled.

Question 3
Refer to the exhibit. 

An engineer is troubleshooting non-802.11 interference and observes this output. Which type of interference signatures can be identified?

  • A: one frequency hopping Bluetooth
  • B: two healthy CCK and one malformed OFDM
  • C: three broadband jammers
  • D: two strong microwave ovens and one moderate

Question 4
Refer to the exhibit. 

Which statement about the join process of the access point is true?

  • A: The time on the controller is outside of the certificates validity time interval, so the join phase failed.
  • B: The AP successfully joined the controller.
  • C: The AP moved from this controller to its primary controller.
  • D: The AP failed to join because the MAC address of the AP was not correct on the controller.
  • E: The controller rejected all discovery requests from the AP because they were not received on the management interface subnet.

Question 5
Refer to the exhibit. 


A new wireless deployment with high AP density is experiencing high latency and connectivity issues on the 2.4 GHz band, despite an initial site survey done by a certified partner. Which option is the most impactful change a wireless consultant recommends?

  • A: Increase the fragmentation threshold to allow larger packets over the air.
  • B: Reduce the beacon period because it reduces the RF interference.
  • C: Disable lower data rates such as 1 Mbps and 2 Mbps.
  • D: Disable the short preamble.
  • E: Disable 802.11g support to reduce interference.

Question 6
A wireless user is experiencing connectivity issues with their Mac OS laptop. If the Mac is exhibiting the behavior of a “sticky client,” how can the tech verify which AP the user is currently connected to?

  • A: Hold shift while clicking the wireless icon.
  • B: Hold option while clicking the wireless icon.
  • C: Hold control while clicking the wireless icon.
  • D: Hold command while clicking the wireless icon.

Question 7
You have successfully configured HA and SSO using two Cisco 5508 Wireless LAN Controllers. You are able to access the Active Primary WLC but are unable to access the Secondary Standby WLC. Which two methods will allow you to access the standby unit? (Choose two.)

  • A: Via SSH to the Redundancy Management Interface.
  • B: Via Service Port Interface.
  • C: Via SSH to the Management Interface.
  • D: Via console connection.

Question 8
Drag and drop the Layer 3 WLAN controller mutual authentication join process events on the left into the order in which they occur on the right. Not all options are used. 

Question 9
An engineer has configured 802.1x for the network and all but one of the APs are passing authentication. Which configuration is causing the failure?

  • A: The AP has override global credentials checked.
  • B: The switch AAA credentials do not match what is configured on ISE.
  • C: The controller 802.1x supplicant credentials do not match what is configured on ISE.
  • D: EAP-FAST is configured on ISE for this AP.

Question 10
An engineer is troubleshooting AP join issues on a wireless infrastructure. While gathering debugs, the engineer notices that one of the commands may generate an excessive amount of data on the console. Which command causes this to occur?

  • A: debug capwap detail enable
  • B: debug capwap errors enable
  • C: debug capwap info enable
  • D: debug capwap events enable
  • E: debug capwap packet enable
  • F: debug capwap payload enable


You can buy ProfExam with a 20% discount..

Get Now!


Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen


Use VCE Exam Simulator to open VCE files