Download Designing Cisco Wireless Enterprise Networks.testking.300-360.2019-02-18.1e.104q.vcex


Download Exam

File Info

Exam Designing Cisco Wireless Enterprise Networks
Number 300-360
File Name Designing Cisco Wireless Enterprise Networks.testking.300-360.2019-02-18.1e.104q.vcex
Size 720 Kb
Posted February 18, 2019
Downloads 32


How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
 
 


Demo Questions

Question 1
Which two types of information must be included in the installation inventory portion of the post-installation report? (Choose two.)

  • A: all AP, controller, and MSE administrator credentials
  • B: the names, locations, IP addresses, MAC addresses, etc. for every AP, controller, and MSE in the WLAN
  • C: a layout of the rack that the equipment is installed
  • D: results of the coverage audit performed with the site survey mapping tool
  • E: the number and type of all WLAN clients and tags
Correct Answer: AB



Question 2
A customer wants to implement a wireless network in a historic location, but is concerned about the structural and aesthetic impact to the facility. Which benefit of using wireless mesh addresses these concerns?

  • A: PoE is required only at the installation location.
  • B: The APs do not have LED lights.
  • C: More wireless channels can be supported.
  • D: APs do not need network connections.
Correct Answer: D



Question 3
An engineer is preparing for an indoor wireless LAN survey and is provisioning a survey kit. Which three pieces of equipment should be included? (Choose three.)

  • A: external connector access point
  • B: integrated antenna access point
  • C: coax low-loss cable
  • D: battery operated power supply
  • E: range finder
  • F: Yagi antennas
Correct Answer: BDE



Question 4
A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP, with high gain antennas for industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs. Which option is the best to reduce the negative impact of the design?

  • A: Deploy the specified access points per area type.
  • B: Resurvey and adjust the design.
  • C: Increase the Tx power on incorrectly surveyed access points.
  • D: Deploy unsurveyed access points to the design.
Correct Answer: B



Question 5
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?

  • A: -62 dBm
  • B: -67 dBm
  • C: -60 dBm
  • D: -70 dBm
Correct Answer: B
Reference: http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/Chapter-9.html



Question 6
A customer has dual-band devices that they want to use 40 MHz channels. If the customer is using Cisco 3600 Series access points with a 5508 controller. Which setting assists with this change?

  • A: Enable band select globally.
  • B: Enable aggressive load balancing.
  • C: Disable lower data rates on 802 .11G GHz radios.
  • D: Disable overlapping 802.11G channels.
Correct Answer: A



Question 7
An engineer is tuning RRM parameters to improve client connectivity. Which channel band results in the best 802.11n client compatibility?

  • A: UNII-2
  • B: UNII-2e
  • C: UNII-3
  • D: UNII
  • E: UNII-1
Correct Answer: E
802.11n operates on the same channel as 802.11a. For better compatibility with 802.11n clients, it is recommended to stay on lower channels (UNII-1 band). 
Reference: http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/108184-config-802-11n-wlc.html



Question 8
An engineer is assigned to assist a customer by estimating the number of access points needed to provide voice-grade wireless coverage in a carpeted office space. How many access points should be estimated to cover this space of roughly 38,000 square feet?

  • A: 17
  • B: 10
  • C: 6
  • D: 13
Correct Answer: D
The rule of thumb coverage plan is 1 AP per 5,000 square feet for data and 1 per 3,000 square feet for voice and location services. 
Reference: http://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html



Question 9
As part of a wireless site survey in a hospital, an engineer needs to identify potential Layer 1 interferers. In which three areas is the engineer most likely expect to find sources of 2.4 GHz and 5 GHz RF noise? (Choose three.)

  • A: emergency room
  • B: magnetic resonance imaging
  • C: laboratory
  • D: X-ray radiography
  • E: Gamma Knife radiation treatment
  • F: kitchen
Correct Answer: ACF



Question 10
Which three recommendations must be taken into consideration when an engineer is installing a new Voice WLAN? (Choose three.)

  • A: Use the Cisco wireless phone site survey client utility.
  • B: Use a separate Cisco Wireless Lan Controller.
  • C: Enable load balance on voice WLANs.
  • D: Maintain -67dBM as a minimal RSSI.
  • E: Set data for 2.4 GHz and voice for 5 GHz using separate SSIDs.
  • F: Enable lower data rates for 2.4-GHz data WLAN.
Correct Answer: ADE









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset