Download Designing Cisco Wireless Enterprise Networks.passguide.300-360.2019-03-23.1e.107q.vcex

Download Exam

File Info

Exam Designing Cisco Wireless Enterprise Networks
Number 300-360
File Name Designing Cisco Wireless Enterprise Networks.passguide.300-360.2019-03-23.1e.107q.vcex
Size 755 Kb
Posted March 23, 2019
Downloads 45

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.


With discount: 20%


Demo Questions

Question 1
Which two types of information must be included in the installation inventory portion of the post-installation report? (Choose two.)

  • A: all AP, controller, and MSE administrator credentials
  • B: the names, locations, IP addresses, MAC addresses, etc. for every AP, controller, and MSE in the WLAN
  • C: a layout of the rack that the equipment is installed
  • D: results of the coverage audit performed with the site survey mapping tool
  • E: the number and type of all WLAN clients and tags

Question 2
A customer wants to implement a wireless network in a historic location, but is concerned about the structural and aesthetic impact to the facility. 
Which benefit of using wireless mesh addresses these concerns?

  • A: PoE is required only at the installation location.
  • B: The APs do not have LED lights.
  • C: More wireless channels can be supported.
  • D: APs do not need network connections.

Question 3
An engineer is preparing for an indoor wireless LAN survey and is provisioning a survey kit. Which three pieces of equipment should be included? (Choose three.)

  • A: external connector access point
  • B: integrated antenna access point
  • C: coax low-loss cable
  • D: battery operated power supply
  • E: range finder
  • F: Yagi antennas

Question 4
Which three options are benefits of U-APSD? (Choose three.)

  • A: optimized power-save mode periods
  • B: increased call capacity
  • C: bandwidth reservation
  • D: synchronization of the transmission and reception of voice frames
  • E: efficient roaming
  • F: priority bandwidth and polling

Question 5
An engineer is performing a predictive wireless design for a carpeted office space, which requires voice capability and location services. 
Which two requirements are inputs to the design? (Choose two.)

  • A: overlapping -67 dBm coverage from three access points
  • B: overlapping -75 dBm coverage from three access points
  • C: overlapping-72 dBm coverage from two access points
  • D: continuous -67 dBm coverage from one access point
  • E: continuous -72 dBm coverage from one access point

Question 6
A customer has dual-band devices that they want to use 40 MHz channels. If the customer is using Cisco 3600 Series access points with a 5508 controller. 
Which setting assists with this change?

  • A: Enable band select globally.
  • B: Enable aggressive load balancing.
  • C: Disable lower data rates on 802 .11G GHz radios.
  • D: Disable overlapping 802.11G channels.

Question 7
An engineer is tuning RRM parameters to improve client connectivity. Which channel band results in the best 802.11n client compatibility?

  • A: UNII-2
  • B: UNII-2e
  • C: UNII-3
  • D: UNII
  • E: UNII-1

Question 8
An engineer is assigned to assist a customer by estimating the number of access points needed to provide voice-grade wireless coverage in a carpeted office space. 
How many access points should be estimated to cover this space of roughly 38,000 square feet?

  • A: 17
  • B: 10
  • C: 6
  • D: 13

Question 9
An engineer plugs in a Cisco Aironet 2700 Series Access Point and it is running in low power. Which three power requirements should be verified? (Choose three.)

  • A: 802.3ac compliant
  • B: 802.3at compliant
  • C: AP requires 43 VDC to function in full power.
  • D: AIR-PWRINJ3 power injector should be used.
  • E: AP requires 57 VDC to function in full power.
  • F: AIR-PWRINJ4 power injector should be used.

Question 10
An 802.11n implementation is being discussed. Users are satisfied with the potential 300-450 Mbps throughput of new 802.11n APs. Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)

  • A: 450 Mbps throughput is the client max for 5-GHz radio.
  • B: Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
  • C: 300 Mbps throughput is the client max for 2.4-GHz radio.
  • D: The remaining bandwidth is divided per device when more clients are connected to one AP.
  • E: 100 Mbps Ethernet switch port is a potential bottleneck.
  • F: CleanAir helps clear noise for 802.11n channel bonding to work.


You can buy ProfExam with a 20% discount..

Get Now!


Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen


Use VCE Exam Simulator to open VCE files