Download Designing Cisco Wireless Enterprise Networks.examlabs.300-360.2019-05-22.1e.107q.vcex


Download Exam

File Info

Exam Designing Cisco Wireless Enterprise Networks
Number 300-360
File Name Designing Cisco Wireless Enterprise Networks.examlabs.300-360.2019-05-22.1e.107q.vcex
Size 755 Kb
Posted May 22, 2019
Downloads 32



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
Which two types of information must be included in the installation inventory portion of the post-installation report? (Choose two.)

  • A: all AP, controller, and MSE administrator credentials
  • B: the names, locations, IP addresses, MAC addresses, etc. for every AP, controller, and MSE in the WLAN
  • C: a layout of the rack that the equipment is installed
  • D: results of the coverage audit performed with the site survey mapping tool
  • E: the number and type of all WLAN clients and tags



Question 2
A customer wants to implement a wireless network in a historic location, but is concerned about the structural and aesthetic impact to the facility. Which benefit of using wireless mesh addresses these concerns?

  • A: PoE is required only at the installation location.
  • B: The APs do not have LED lights.
  • C: More wireless channels can be supported.
  • D: APs do not need network connections.



Question 3
An engineer is preparing for an indoor wireless LAN survey and is provisioning a survey kit. Which three pieces of equipment should be included? (Choose three.)

  • A: external connector access point
  • B: integrated antenna access point
  • C: coax low-loss cable
  • D: battery operated power supply
  • E: range finder
  • F: Yagi antennas



Question 4
Which three options are benefits of U-APSD? (Choose three.)

  • A: optimized power-save mode periods
  • B: increased call capacity
  • C: bandwidth reservation
  • D: synchronization of the transmission and reception of voice frames
  • E: efficient roaming
  • F: priority bandwidth and polling



Question 5
An engineer is performing a predictive wireless design for a carpeted office space, which requires voice capability and location services. Which two requirements are inputs to the design? (Choose two.)

  • A: overlapping -67 dBm coverage from three access points
  • B: overlapping -75 dBm coverage from three access points
  • C: overlapping-72 dBm coverage from two access points
  • D: continuous -67 dBm coverage from one access point
  • E: continuous -72 dBm coverage from one access point



Question 6
A customer has dual-band devices that they want to use 40 MHz channels. If the customer is using Cisco 3600 Series access points with a 5508 controller. Which setting assists with this change?

  • A: Enable band select globally.
  • B: Enable aggressive load balancing.
  • C: Disable lower data rates on 802 .11G GHz radios.
  • D: Disable overlapping 802.11G channels.



Question 7
An engineer is tuning RRM parameters to improve client connectivity. Which channel band results in the best 802.11n client compatibility?

  • A: UNII-2
  • B: UNII-2e
  • C: UNII-3
  • D: UNII
  • E: UNII-1



Question 8
An engineer is assigned to assist a customer by estimating the number of access points needed to provide voice-grade wireless coverage in a carpeted office space. How many access points should be estimated to cover this space of roughly 38,000 square feet?

  • A: 17
  • B: 10
  • C: 6
  • D: 13



Question 9
An engineer plugs in a Cisco Aironet 2700 Series Access Point and it is running in low power. Which three power requirements should be verified? (Choose three.)

  • A: 802.3ac compliant
  • B: 802.3at compliant
  • C: AP requires 43 VDC to function in full power.
  • D: AIR-PWRINJ3 power injector should be used.
  • E: AP requires 57 VDC to function in full power.
  • F: AIR-PWRINJ4 power injector should be used.



Question 10
An 802.11n implementation is being discussed. Users are satisfied with the potential 300-450 Mbps throughput of new 802.11n APs. Which three bandwidth requirements are used to calculate per client bandwidth through an 802.11n AP network? (Choose three.)

  • A: 450 Mbps throughput is the client max for 5-GHz radio.
  • B: Channel bonding on 5 GHz is required for a client to have a 300 Mbps WiFi link.
  • C: 300 Mbps throughput is the client max for 2.4-GHz radio.
  • D: The remaining bandwidth is divided per device when more clients are connected to one AP.
  • E: 100 Mbps Ethernet switch port is a potential bottleneck.
  • F: CleanAir helps clear noise for 802.11n channel bonding to work.









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset