Download Implementing Cisco Data Center Infrastructure.real-exams.300-165.2018-09-24.1e.145q.vcex

Download Dump

File Info

Exam Implementing Cisco Data Center Infrastructure
Number 300-165
File Name Implementing Cisco Data Center Infrastructure.real-exams.300-165.2018-09-24.1e.145q.vcex
Size 3.91 Mb
Posted September 24, 2018
Downloaded 3



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
After enabling strong, reversible 128-bit Advanced Encryption Standard password type-6 encryption on a Cisco Nexus 7000, which command would convert existing plain or weakly encrypted passwords to type-6 encrypted passwords?

  • A: switch# encryption re-encrypt obfuscated
  • B: switch# encryption decrypt type6
  • C: switch# key config-key ascii
  • D: switch(config)# feature password encryption aes



Question 2
Instructions 
This task does not require device configuration. 
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required. 
To access the multiple-choice questions, click the numbered boxes on the left of the top panel. 
There are four multiple-choice questions with this task. 
Scenario 
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. ClickNexus 5548 icon to run show commands and answer the questions. 

   

What is the status of FCoE license on Cisco Nexus 5548 switch?

  • A: FCoE license is not installed
  • B: FCoE license is installed, but it is expired
  • C: FCoE license is installed and status is enabled
  • D: FCoE license does not need to be installed because it is part of ENTERPRISE_PKG



Question 3
Instructions 
This task does not require device configuration. 
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required. 
To access the multiple-choice questions, click the numbered boxes on the left of the top panel. 
There are four multiple-choice questions with this task. 
Scenario 
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. Click Nexus5548 icon to run show commands and answer the questions. 

   

Ethernet interface 1/5 on Cisco Nexus 5548 is connected to Cisco UCS C220 rack server. What is the status of Ethernet 1/5 interface for FCoE functionality?

  • A: Interface reset on Ethernet 1/5 is preventing the FCoE connection from coming up
  • B: MTU size of 1500 on Ethernet interface 1/5 needs to be changed for FCoE to come UP
  • C: Cisco Nexus 5548 needs a layer 3 daughter card for FCoE to come UP on the Ethernet interface 1/5
  • D: Ethernet interface 1/5 is operational for FCoE and the status is UP



Question 4
Instructions 
This task does not require device configuration. 
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required. 
To access the multiple-choice questions, click the numbered boxes on the left of the top panel. 
There are four multiple-choice questions with this task. 
Scenario 
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. Click Nexus5548 icon to run show commands and answer the questions. 

   

What is the status of FC interface associated with ethernet 1/5 indicate?

  • A: Trank VSAN 11 is isolated
  • B: Interface vfc 5 is up and running for the assigned VSAN
  • C: Trunk VSAN 11 is initializing
  • D: VSAN to FC mapping is not working as expected



Question 5
Instructions 
This task does not require device configuration. 
Click Cisco Nexus 5548 to gain console access. No console or enable passwords are required. 
To access the multiple-choice questions, click the numbered boxes on the left of the top panel. 
There are four multiple-choice questions with this task. 
Scenario 
Customer is deploying Cisco Nexus 5548 switch with FCoE in their new data center, as shown in the topology diagram. Click Nexus5548 icon to run show commands and answer the questions. 

   

When configuring FCoE VLANs and Virtual Fiber Channel (vFC) Interfaces, what guidelines must be followed?

  • A: Each vFC interface must be bound to an FCoE-enabled Ethernet or EtherChannel interface or to the MAC address of a remotely connected adapter
  • B: Each FC interface must be bound to an FCoE-enabled Ethernet or EtherChannel interface or to the MAC address of a remotely connected adapter
  • C: Each vFC interface must be bound to an FC enabled Ethernet or EtherChannel interface or to the MAC address of a remotely connected adapter
  • D: Each vFC interface must be bound to an FCoE-enabled vFC or EtherChannel interface or to the MAC address of a remotely connected adapter



Question 6
You have two Cisco Nexus 7700 Series switches named SwitchA and SwitchB. You use the Rapid PVST+ protocol. You must configure the switches as the STP root switches for VLANs 100 to 200. Which command set should you run?

  • A: SwitchA(config)# spanning-tree vlan 100-200 priority 61440 
    SwitchB(config)# spanning-tree vlan 100-200 priority 61440
  • B: SwitchA(config-if)# spanning-tree guard root 
    SwitchB(config-if)# spanning-tree guard root
  • C: SwitchA(config-if)# spanning-tree cost 100 
    SwitchB(config-if)# spanning-tree cost 100
  • D: SwitchA(config)# spanning-tree vlan 100-200 root primary 
    SwitchB(config)# spanning-tree vlan 100-200 root secondary



Question 7
Which action limits the maximum number of routes that are allowed in the routing table?

  • A: Use a BGP filter.
  • B: Use only static routes.
  • C: Use the maximum routes command inside address family.
  • D: Use a route map to filter routes.



Question 8
Which two items are services that are provided by Cisco Fabric Services? (Choose two.)

  • A: RSA key pair distribution
  • B: device alias distribution
  • C: Kerberos proxy distribution
  • D: DPVM configuration distribution
  • E: VLAN database distribution



Question 9
You have two Fibre Channel switches that are connected via EISL. You discover that the fabrics are isolated. What are two possible causes of the fabric isolation? (Choose two.)

  • A: mismatched SAN port channel group modes
  • B: mismatched VSANs on either switch
  • C: mismatched active zone set databases
  • D: mismatched line card types
  • E: mismatched switch series



Question 10
N7K-1(config)# feature vpc 
N7K-1(config)# vpc domain 113 
N7K-1(config-vpc-domain)# peer-gateway 
N7K-1(config-vpc-domain)# 
N7K-2(config)# feature vpc 
N7K-2(config)# vpc domain 113 
N7K-2(config-vpc-domain)# peer-gateway 
N7K-2(config-vpc-domain)# 
Refer to the exhibit. What is the consequence of configuring peer-gateway on the two vPC peers N7K-1 and N7K-2?

  • A: The downstream device detects only one of the vPC peers as its gateway.
  • B: This configuration enables the downstream device to use DHCP to obtain its default gateway.
  • C: Nothing, this is the standard vPC configuration to make the feature work.
  • D: The downstream device can use DMAC of N7K-1 on the link to N7K-2, and N7K-2 forwards the packet.









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset