Download Implementing Cisco Data Center Infrastructure.pass4sures.300-165.2019-02-03.1e.162q.vcex


Download Exam

File Info

Exam Implementing Cisco Data Center Infrastructure
Number 300-165
File Name Implementing Cisco Data Center Infrastructure.pass4sures.300-165.2019-02-03.1e.162q.vcex
Size 7.36 Mb
Posted February 03, 2019
Downloads 25


How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
 
 


Demo Questions

Question 1
switch# configure terminal 
switch (config) #  interface ethernet 1/4 
switch (config-if) #  switchport mode trunk 
switch (config-if) #  channel-group 1 mode active 
Refer to the exhibit. Which type of port channel was created?

  • A: LACP
  • B: static
  • C: PAgP
  • D: desirable
Correct Answer: A



Question 2
Which statement about electronic programmable logic device image upgrades is true?

  • A: An EPLD upgrade must be performed during an ISSU system or kickstart upgrade.
  • B: EPLD and ISSU image upgrades are nondisruptive.
  • C: Whether the module being upgraded is online pr offline only the EPLD images that have different current and new versions are upgraded.
  • D: You can execute an upgrade or downgrade only from the active supervisor module.
Correct Answer: D
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_0/epld/release/notes/epld_rn.html



Question 3
You plan to configure authentication for OSPF. In which configuration mode should you configure OSPF authentication to use a specific key chain?

  • A: router ospf
  • B: global
  • C: vPC
  • D: interface
Correct Answer: D
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/unicast/configuration/guide/l3_cli_nxos/l3_ospf.html



Question 4
Which GLBL load-balancing method ensures that a client is always mapped to the same virtual MAC address?

  • A: host-dependent
  • B: vmac-weighted
  • C: dedicated-vmac-mode
  • D: shortest-path and weighting
Correct Answer: A
Reference: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-services/product_data_sheet0900aecd803a546c.html



Question 5
Which two features are required to implement a Layer 3 VXLAN gateway on the Cisco Nexus 5600 Series platform? (Choose two.)

  • A: feature mpls
  • B: feature nv overlay
  • C: feature lldp
  • D: feature eigrp
  • E: feature vn-segment-vlan-based
Correct Answer: AE
Reference: http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r5-3/lxvpn/configuration/guide/b-l3vpn-cg53xasr9k/b-l3vpn-cg53xasr9k_chapter_0111.pdf



Question 6
You experience an issue on a Cisco Nexus 7700 Series switch. You must gather detailed information about the system state and the configuration of the switch. Which command should you run?

  • A: switch# show logging > bootflash:Log.txt
  • B: switch# show tech-support > bootflash:Log.txt
  • C: switch# show running-config > bootflash:Log.txt
  • D: switch# show system > bootflash:Log.txt
Correct Answer: B



Question 7
ipv6 access-list MY_ACL 
permit tcp 2001:cc1e:aaaa::/64 2001:cc1e:befe:cccc::/64
permit udp 2001:cc1e:bbbb::/64 2001:cc1e:befe:cccc::/64
interface ethernet 1/1 
ipv6 address 2001:cc1e:befe:cccc::1/64
ipv6 traffic-filter MY_ACL in 
Refer to the exhibit. Only the ACL in the exhibit is applied on a VDC, and only the default VRF is used. In which two scenarios is traffic permitted? 
(Choose two.)

  • A: TCP traffic from 2001:cc1e:aaaa::/64 to 2001:cc1e:befe:cccc:abcd/64
  • B: GRE traffic from 2001:cc1e:befe:cccc::abcd/64 to 2001:cc1e:aaaa/64
  • C: UDP traffic from 2001:cc1e:aaaa::/64 to 2001::cc1e:befe:cccc::abcd/64
  • D: GRE traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc::abcd/64
  • E: TCP traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc:abcd/64
Correct Answer: AD



Question 8
Which two options should you consider when you configure a SAN zone set? (Choose two.)

  • A: VSANs can be activated by using enhanced zoning.
  • B: A SAN zone set consists of one or more SAN zones.
  • C: A SAN zone set must be activated manually on all of the fabric nodes.
  • D: Only the SAN zone set can be activated simultaneously.
  • E: One SAN zone can be the member of only one zone set.
Correct Answer: BC
Reference: https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/san-os/quick/guide/qcg_zones.pdf



Question 9
Which technology is required in the underlay to facilitate remote VTEP discovery?

  • A: multicast
  • B: VXLAN
  • C: OSPF
  • D: BGP
Correct Answer: A



Question 10
Which command should you ran to distribute NTP configuration changes by using Cisco Fabric Services?

  • A: ntp distribute
  • B: ntp server 1.2.3.4
  • C: ntp commit
  • D: ntp authenticate
Correct Answer: A
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_2cfs.html#wp1419346






CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset