Download Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2-0).pass4sures.300-135.2018-09-18.1e.53q.vcex

Download Dump

File Info

Exam Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2.0)
Number 300-135
File Name Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2-0).pass4sures.300-135.2018-09-18.1e.53q.vcex
Size 8.38 Mb
Posted September 18, 2018
Downloaded 0



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
On which device is the fault condition located?

  • A: R1
  • B: R2
  • C: R3
  • D: R4
  • E: DSW1
  • F: DSW2
  • G: ASW1



Question 2
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
The fault condition is related to which technology?

  • A: BGP
  • B: NTP
  • C: IP NAT
  • D: IPv4 OSPF Routing
  • E: IPv4 OSPF Redistribution
  • F: IPv6 OSPF Routing
  • G: IPv4 layer 3 security



Question 3
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
What is the solution to the fault condition?

  • A: Under the interface Serial0/0/0 configuration enter the ip nat inside command.
  • B: Under the interface Serial0/0/0 configuration enter the ip nat outside command.
  • C: Under the ip access-list standard nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command.
  • D: Under the ip access-list standard nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command.



Question 4
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
On which device is the fault condition located?

  • A: R1
  • B: R2
  • C: R3
  • D: R4
  • E: DSW1
  • F: DSW2
  • G: ASW1



Question 5
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
The fault condition is related to which technology?

  • A: BGP
  • B: NTP
  • C: IP NAT
  • D: IPv4 OSPF Routing
  • E: IPv4 OSPF Redistribution
  • F: IPv6 OSPF Routing
  • G: IPv4 layer 3 security



Question 6
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
What is the solution to the fault condition?

  • A: Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
  • B: Under the ip access-list extended edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command.
  • C: Under the ip access-list extended edge_security configuration delete the deny ip 10.0.0.0.0 0.255.255.255 any command.
  • D: Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access-group edge_security out command.



Question 7
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
The fault condition is related to which technology?

  • A: NTP
  • B: Switch-to-Switch Connectivity
  • C: Access Vlans
  • D: Port Security
  • E: VLAN ACL / Port ACL
  • F: Switch Virtual Interface



Question 8
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
What is the solution to the fault condition?

  • A: In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port-security interface configuration commands. Then in exec mode clear errdisable interface fa 1/01 – 2 vlan 10 command
  • B: In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port-security, followed by shutdown, no shutdown interface configuration commands.
  • C: In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port-security interface configuration commands.
  • D: In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port-security interface configuration commands. Then in exec mode clear errdisable interface fa 1/0/1, then clear errdisable interface fa 1/0/2 commands.



Question 9
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
On which device is the fault condition located?

  • A: R1
  • B: R2
  • C: R3
  • D: R4
  • E: DSW1
  • F: DSW2
  • G: ASW1
  • H: ASW2



Question 10
The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. 
Use the supported commands to isolated the cause of this fault and answer the following questions. 
On which device is the fault condition located?

  • A: R1
  • B: R2
  • C: R3
  • D: R4
  • E: DSW1
  • F: DSW2
  • G: ASW1
  • H: ASW2









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset