Download Implementing Cisco IP Switched Networks (SWITCH v2-0).selftestengine.300-115.2019-01-09.1e.447q.vcex

Download Dump

File Info

Exam Implementing Cisco IP Switched Networks (SWITCH v2.0)
Number 300-115
File Name Implementing Cisco IP Switched Networks (SWITCH v2-0).selftestengine.300-115.2019-01-09.1e.447q.vcex
Size 9.43 Mb
Posted January 09, 2019
Downloaded 58



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%





Demo Questions

Question 1
Refer to the exhibit. 

  

Switch A, B, and C are trunked together and have been properly configured for VTP. Switch C receives VLAN information from the VTP server Switch A, but Switch B does not receive any VLAN information. What is the most probable cause of this behavior?

  • A: Switch B is configured in transparent mode.
  • B: Switch B is configured with an access port to Switch A, while Switch C is configured with a trunk port to Switch B.
  • C: The VTP revision number of the Switch B is higher than that of Switch A.
  • D: The trunk between Switch A and Switch B is misconfigured.



Question 2
Refer to the exhibit. 

  

Switch A, B, and C are trunked together and have been properly configured for VTP. Switch B has all VLANs, but Switch C is not receiving traffic from certain VLANs. What would cause this issue?

  • A: A VTP authentication mismatch occurred between Switch A and Switch B.
  • B: The VTP revision number of Switch B is higher than that of Switch A.
  • C: VTP pruning is configured globally on all switches and it removed VLANs from the trunk interface that is connected to Switch C.
  • D: The trunk between Switch A and Switch B is misconfigured.



Question 3
After the recent upgrade of the switching infrastructure, the network engineer notices that the port roles that were once “blocking” are now defined as “alternate” and “backup.” What is the reason for this change?

  • A: The new switches are using RSTP instead of legacy IEEE 802.1D STP.
  • B: IEEE 802.1D STP and PortFast have been configured by default on all newly implemented Cisco Catalyst switches.
  • C: The administrator has defined the switch as the root in the STP domain.
  • D: The port roles have been adjusted based on the interface bandwidth and timers of the new Cisco Catalyst switches.



Question 4
An administrator recently configured all ports for rapid transition using PortFast. After testing, it has been determined that several ports are not transitioning as they should. What is the reason for this?

  • A: RSTP has been enabled per interface and not globally.
  • B: The STP root bridge selection is forcing key ports to remain in non-rapid transitioning mode.
  • C: STP is unable to achieve rapid transition for trunk links.
  • D: The switch does not have the processing power to ensure rapid transition for all ports.



Question 5
Which technique automatically limits VLAN traffic to only the switches that require it?

  • A: access lists
  • B: DTP in nonegotiate
  • C: VTP pruning
  • D: PBR



Question 6
What effect does the mac address-table aging-time 180 command have on the MAC address-table?

  • A: This is how long a dynamic MAC address will remain in the CAM table.
  • B: The MAC address-table will be flushed every 3 minutes.
  • C: The default timeout period will be 360 seconds.
  • D: ARP requests will be processed less frequently by the switch.
  • E: The MAC address-table will hold addresses 180 seconds longer than the default of 10 minutes.



Question 7
While working in the core network building, a technician accidently bumps the fiber connection between two core switches and damages one of the pairs of fiber. As designed, the link was placed into a non-forwarding state due to a fault with UDLD. After the damaged cable was replaced, the link did not recover. What solution allows the network switch to automatically recover from such an issue?

  • A: macros
  • B: errdisable autorecovery
  • C: IP Event Dampening
  • D: command aliases
  • E: Bidirectional Forwarding Detection



Question 8
A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN template. The SDM template is causing the CPU of the switch to spike during peak working hours. What is the root cause of this issue?

  • A: The VLAN receives additional frames from neighboring switches.
  • B: The SDM VLAN template causes the MAC address-table to overflow.
  • C: The VLAN template disables routing in hardware.
  • D: The switch needs to be rebooted before the SDM template takes effect.



Question 9
An access switch has been configured with an EtherChannel port. After configuring SPAN to monitor this port, the network administrator notices that not all traffic is being replicated to the management server. What is a cause for this issue?

  • A: VLAN filters are required to ensure traffic mirrors effectively.
  • B: SPAN encapsulation replication must be enabled to capture EtherChannel destination traffic.
  • C: The port channel can be used as a SPAN source, but not a destination.
  • D: RSPAN must be used to capture EtherChannel bidirectional traffic.



Question 10
Refer to the exhibit. 

  

What is the result of the configuration?

  • A: The EtherChannels would not form because the load-balancing method must match on the devices.
  • B: The EtherChannels would form and function properly even though the load-balancing and EtherChannel modes do not match.
  • C: The EtherChannels would form, but network loops would occur because the load-balancing methods do not match.
  • D: The EtherChannels would form and both devices would use the dst-ip load-balancing method because Switch1 is configured with EtherChannel mode active.









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset