Download Troubleshooting Cisco IP Telephony & Video v1-0.actualtests.300-080.2019-12-09.1e.165q.vcex


Download Exam

File Info

Exam Troubleshooting Cisco IP Telephony & Video v1.0
Number 300-080
File Name Troubleshooting Cisco IP Telephony & Video v1-0.actualtests.300-080.2019-12-09.1e.165q.vcex
Size 9.35 Mb
Posted December 09, 2019
Downloads 26



How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAMFILESCOM

Coupon: EXAMFILESCOM
With discount: 20%


 
 



Demo Questions

Question 1
An IP phone that is connected through a Cisco Catalyst 3750 Series Switch is failing to register with the subscriber as a backup server. When the user presses the settings button on the phone, only the Cisco Unified Communications Manager publisher shows as registered. What is the most likely cause for this issue?

  • A: The phone does not have the correct Cisco Unified Communications Manager group in the device configuration page.
  • B: The Cisco Unified Communications Manager group that is applied through the device pool is misconfigured.
  • C: The ip-helper address command for the subscriber is not configured on the switch port.
  • D: The subscriber does not have the correct device pool configured.
  • E: The enterprise phone configuration does not have the call control redundancy enabled.



Question 2
Refer to the exhibit. 

 
 
An IP phone that is connected through a Cisco Catalyst 3750 Series Switch is failing to register with Cisco Unified Communications Manager. When the user presses the settings button on the phone, the Operational VLAN ID shows a blank entry. What is the most likely cause for this issue?

  • A: The switch may not be supplying inline power.
  • B: The spanning tree portfast command needs to be removed.
  • C: The trunk encapsulation is missing. The trunk must be configured for dot1.Q.
  • D: Cisco Discovery Protocol is disabled on the switch.
  • E: The Operational VLAN ID of the phone always shows as blank. The Admin. VLAN ID should be 110.



Question 3
Which issue would cause an MGCP gateway to fail to register with Cisco Unified Communications Manager?

  • A: missing the configuration command isdn bind-l3 ccm-manager under the ISDN interface
  • B: mismatched domain name on the MGCP gateway and Cisco Unified Communications Manager gateway configuration
  • C: misconfigured route group in Cisco Unified Communications Manager
  • D: incorrect MGCP IP address specified in the gateway configuration in Cisco Unified Communications Manager



Question 4
Endpoints are configured for both H.323 and SIP using the same URI and Cisco VCS settings, but the endpoints register only as H.323 endpoints. What is causing this issue?

  • A: A firewall is blocking all traffic from the endpoints to the Cisco VCS.
  • B: The Cisco VCS has no SIP domains configured.
  • C: The Cisco VCS is blocking the endpoints because of duplicate ID entries.
  • D: The endpoints do not have the SIP option key installed.
  • E: SIP does not work, because SIP is used for Cisco Unified Communications Manager registration only.



Question 5
You are trying to register an H.323-based Cisco TelePresence system to Cisco Unified Communications Manager and a Cisco DX70 system to the Cisco VCS Control. Why do neither of the units want to register?

  • A: The H.323-based system needs an E164 number to register to Cisco Unified Communications Manager, and the Cisco DX70 needs to have the MAC address configured first on the Cisco VCS Control.
  • B: The H.323-based system needs to register to the Cisco VCS Control with an E.164 number, and the Cisco DX70 needs the TFTP address to register on the Cisco Unified Communications Manager.
  • C: Both systems need to register to the Cisco VCS Control, but the H.323-based system needs to have the gatekeeper setting set to "Direct."
  • D: Both systems need to register to the Cisco Unified Communications Manager, as the Cisco VCS Control is used only for firewall traversal.
  • E: You need Cisco TelePresence Management Suite to register Cisco TelePresence systems.
  • F: You need Cisco TelePresence Server to register Cisco TelePresence systems.



Question 6
When a database replication issue is suspected, which three tools can be used to check the database replication status? (Choose three.)

  • A: Cisco Unified Communications Manager RTMT tool
  • B: Cisco Unified Communications Manager Serviceability interface
  • C: Cisco Unified Reporting
  • D: Cisco Unified Communications Manager CLI interface
  • E: Cisco IP Phone Device Stats from the Settings button
  • F: Cisco Unified OS Administration interface



Question 7
You must integrate a third-party H.323 system with your existing Cisco Unified Communications Manager cluster. When you create an H.323 trunk from the cluster, calls from the cluster to the third-party H.323 system are failing. The vendor of the third-party H.323 device has confirmed that the H.323 call setup time must be reduced. Which two approaches reduce the call setup time from Cisco Unified Communications Manager to the third-party H.323 device? (Choose two.)

  • A: Implement a software MTP.
  • B: Implement a hardware MTP.
  • C: Implement transcoding with the router DSP resources.
  • D: Implement transcoding with the Cisco Unified Communications Manager resources.



Question 8
When a remote endpoint dials in to join a conference that is configured on a Cisco TelePresence Server bridge, the endpoint receives only audio. Other users can successfully join the call with Voice and Video. What is causing this issue?

  • A: The endpoint does not have the multisite option installed.
  • B: The endpoint does not have the partition of the bridge in its CSS.
  • C: The bridge is out of all licenses.
  • D: The endpoint is assigned a region without enough configured bandwidth for video.
  • E: The bridge is not able to host video calls.



Question 9
Cisco TelePresence System EX90-A and EX90-B are in a call. EX90-A tries to call EX90-C. When the call is dialed, EX90-B is put on hold. EX90-A and EX90-C are connected, but there is no merge button on the touch panel. What is causing this issue?

  • A: The multisite option key is missing.
  • B: The multisite configuration is missing.
  • C: The conference option key is missing.
  • D: The conference configuration is missing.
  • E: CiscoTelePresence systems cannot make multipoint calls without a Cisco TelePresence Server.
  • F: The multipoint option key is missing.



Question 10
During a business-to-business video call through the Cisco Expressway solution, the internal endpoint can call out to the remote endpoint on the Internet, but it does not receive audio or video. The remote endpoint receives both audio and video. What is causing the issue?

  • A: The Cisco Expressway does not have a Rich Media Session license.
  • B: The firewall is blocking SIP signaling.
  • C: The Cisco Unified Communications Manager is not configured for business-to-business calling.
  • D: The firewall is blocking inbound RTP ports.
  • E: The Advanced Networking option is not installed on the Expressway Edge.









CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset